Message ID | 20190324163209.17312-6-vkoul@kernel.org |
---|---|
State | New |
Headers | show |
Series | arm64: dts: qcom: qcs404: ethernet and other updates | expand |
On Sun 24 Mar 09:32 PDT 2019, Vinod Koul wrote: > From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > > The PMS405 sports 5 SMPS and 13 LDO regulators. > > Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org> > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/pms405.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi > index 1bb836d1e8aa..8da4dee1db9b 100644 > --- a/arch/arm64/boot/dts/qcom/pms405.dtsi > +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi > @@ -131,4 +131,24 @@ > interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; > }; > }; > + > + pms405_1: pms405@1 { > + compatible = "qcom,spmi-pmic"; > + reg = <0x1 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + regulators { Label the regulators node and keep the compatible here. s3-supply and pms405_s3 are board specific, so define these in the qcs404-evb.dtsi instead. Also double check the EVB schematics for the name of the line coming out of S3; I would assume vdd_apc or something like that. Regards, Bjorn > + compatible = "qcom,pms405-regulators"; > + vdd_s3-supply = <&pms405_s3>; > + > + pms405_s3: s3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vdd_cpu"; > + regulator-min-microvolt = <1048000>; > + regulator-max-microvolt = <1352000>; > + }; > + }; > + }; > }; > -- > 2.20.1 >
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 1bb836d1e8aa..8da4dee1db9b 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -131,4 +131,24 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; }; + + pms405_1: pms405@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + regulators { + compatible = "qcom,pms405-regulators"; + vdd_s3-supply = <&pms405_s3>; + + pms405_s3: s3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1352000>; + }; + }; + }; };