diff mbox

[30/32] ARM: ux500: Supply MMC DMA configuration via Device Tree

Message ID 1366279934-30761-31-git-send-email-lee.jones@linaro.org
State New
Headers show

Commit Message

Lee Jones April 18, 2013, 10:12 a.m. UTC 
When requesting a channel, a DMA client needs to pass some pieces of
information such as; request channel, device type, channel type and
direction etc. Normally we do this in the form of platform data, but
when DT is enabled we need to pass it using the driver's bindings
instead.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index bd0fe5f..c064a9a 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -605,6 +605,11 @@ 
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
 			interrupts = <0 60 0x4>;
+
+			dmas = <&dma 0 29 0x8>, /* Logical - DevToMem */
+			       <&dma 0 29 0x4>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
@@ -612,6 +617,11 @@ 
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
 			interrupts = <0 50 0x4>;
+
+			dmas = <&dma 0 32 0x8>, /* Logical - DevToMem */
+			       <&dma 0 32 0x4>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
@@ -619,6 +629,11 @@ 
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
 			interrupts = <0 41 0x4>;
+
+			dmas = <&dma 0 28 0x8>, /* Logical - DevToMem */
+			       <&dma 0 28 0x4>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
@@ -633,6 +648,11 @@ 
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 99 0x4>;
+
+			dmas = <&dma 0 42 0x8>, /* Logical - DevToMem */
+			       <&dma 0 42 0x4>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};