new file mode 100644
@@ -0,0 +1,18 @@
+Bitmain BM1880 SoC Reset Controller
+===================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "bitmain,bm1880-reset"
+- reg: Offset and length of reset controller space in SCTRL.
+- #reset-cells: Must be 1.
+
+Example:
+
+ reset: reset-controller@800 {
+ compatible = "bitmain,bm1880-reset";
+ reg = <0x800 0x8>;
+ #reset-cells = <1>;
+ };
new file mode 100644
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Bitmain Ltd.
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+#ifndef _DT_BINDINGS_BM1880_RESET_H
+#define _DT_BINDINGS_BM1880_RESET_H
+
+#define BM1880_RST_MAIN_AP 0
+#define BM1880_RST_SECOND_AP 1
+#define BM1880_RST_DDR 2
+#define BM1880_RST_VIDEO 3
+#define BM1880_RST_JPEG 4
+#define BM1880_RST_VPP 5
+#define BM1880_RST_GDMA 6
+#define BM1880_RST_AXI_SRAM 7
+#define BM1880_RST_TPU 8
+#define BM1880_RST_USB 9
+#define BM1880_RST_ETH0 10
+#define BM1880_RST_ETH1 11
+#define BM1880_RST_NAND 12
+#define BM1880_RST_EMMC 13
+#define BM1880_RST_SD 14
+#define BM1880_RST_SDMA 15
+#define BM1880_RST_I2S0 16
+#define BM1880_RST_I2S1 17
+#define BM1880_RST_UART0_1_CLK 18
+#define BM1880_RST_UART0_1_ACLK 19
+#define BM1880_RST_UART2_3_CLK 20
+#define BM1880_RST_UART2_3_ACLK 21
+#define BM1880_RST_MINER 22
+#define BM1880_RST_I2C0 23
+#define BM1880_RST_I2C1 24
+#define BM1880_RST_I2C2 25
+#define BM1880_RST_I2C3 26
+#define BM1880_RST_I2C4 27
+#define BM1880_RST_PWM0 28
+#define BM1880_RST_PWM1 29
+#define BM1880_RST_PWM2 30
+#define BM1880_RST_PWM3 31
+#define BM1880_RST_SPI 32
+#define BM1880_RST_GPIO0 33
+#define BM1880_RST_GPIO1 34
+#define BM1880_RST_GPIO2 35
+#define BM1880_RST_EFUSE 36
+#define BM1880_RST_WDT 37
+#define BM1880_RST_AHB_ROM 38
+#define BM1880_RST_SPIC 39
+
+#define BM1880_CLK_RST_A53 0
+#define BM1880_CLK_RST_50M_A53 1
+#define BM1880_CLK_RST_AHB_ROM 2
+#define BM1880_CLK_RST_AXI_SRAM 3
+#define BM1880_CLK_RST_DDR_AXI 4
+#define BM1880_CLK_RST_EFUSE 5
+#define BM1880_CLK_RST_APB_EFUSE 6
+#define BM1880_CLK_RST_AXI_EMMC 7
+#define BM1880_CLK_RST_EMMC 8
+#define BM1880_CLK_RST_100K_EMMC 9
+#define BM1880_CLK_RST_AXI_SD 10
+#define BM1880_CLK_RST_SD 11
+#define BM1880_CLK_RST_100K_SD 12
+#define BM1880_CLK_RST_500M_ETH0 13
+#define BM1880_CLK_RST_AXI_ETH0 14
+#define BM1880_CLK_RST_500M_ETH1 15
+#define BM1880_CLK_RST_AXI_ETH1 16
+#define BM1880_CLK_RST_AXI_GDMA 17
+#define BM1880_CLK_RST_APB_GPIO 18
+#define BM1880_CLK_RST_APB_GPIO_INTR 19
+#define BM1880_CLK_RST_GPIO_DB 20
+#define BM1880_CLK_RST_AXI_MINER 21
+#define BM1880_CLK_RST_AHB_SF 22
+#define BM1880_CLK_RST_SDMA_AXI 23
+#define BM1880_CLK_RST_SDMA_AUD 24
+#define BM1880_CLK_RST_APB_I2C 25
+#define BM1880_CLK_RST_APB_WDT 26
+#define BM1880_CLK_RST_APB_JPEG 27
+#define BM1880_CLK_RST_JPEG_AXI 28
+#define BM1880_CLK_RST_AXI_NF 29
+#define BM1880_CLK_RST_APB_NF 30
+#define BM1880_CLK_RST_NF 31
+#define BM1880_CLK_RST_APB_PWM 32
+#define BM1880_CLK_RST_RV 33
+#define BM1880_CLK_RST_APB_SPI 34
+#define BM1880_CLK_RST_TPU_AXI 35
+#define BM1880_CLK_RST_UART_500M 36
+#define BM1880_CLK_RST_APB_UART 37
+#define BM1880_CLK_RST_APB_I2S 38
+#define BM1880_CLK_RST_AXI_USB 39
+#define BM1880_CLK_RST_APB_USB 40
+#define BM1880_CLK_RST_125M_USB 41
+#define BM1880_CLK_RST_33K_USB 42
+#define BM1880_CLK_RST_12M_USB 43
+#define BM1880_CLK_RST_APB_VIDEO 44
+#define BM1880_CLK_RST_VIDEO_AXI 45
+#define BM1880_CLK_RST_VPP_AXI 46
+#define BM1880_CLK_RST_APB_VPP 47
+#define BM1880_CLK_RST_AXI1 48
+#define BM1880_CLK_RST_AXI2 49
+#define BM1880_CLK_RST_AXI3 50
+#define BM1880_CLK_RST_AXI4 51
+#define BM1880_CLK_RST_AXI5 52
+#define BM1880_CLK_RST_AXI6 53
+
+#endif /* _DT_BINDINGS_BM1880_RESET_H */