diff mbox series

[09/15] clocksource/drivers/tcb_clksrc: Use tcb as sched_clock

Message ID 20190509111048.11151-9-daniel.lezcano@linaro.org
State Accepted
Commit f712a1e8e59e8f42b5a9ec3887a4ad079bb18175
Headers show
Series [01/15] clocksource/drivers/sun4i: Add a compatible for suniv | expand

Commit Message

Daniel Lezcano May 9, 2019, 11:10 a.m. UTC
From: Alexandre Belloni <alexandre.belloni@bootlin.com>


Now that the driver is registered early enough, use the TCB as the
sched_clock which is much more accurate than the jiffies implementation.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

---
 drivers/clocksource/tcb_clksrc.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index bf68504da94a..9de8c10ab546 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -11,6 +11,7 @@ 
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/sched_clock.h>
 #include <linux/syscore_ops.h>
 #include <soc/at91/atmel_tcb.h>
 
@@ -114,6 +115,16 @@  static struct clocksource clksrc = {
 	.resume		= tc_clksrc_resume,
 };
 
+static u64 notrace tc_sched_clock_read(void)
+{
+	return tc_get_cycles(&clksrc);
+}
+
+static u64 notrace tc_sched_clock_read32(void)
+{
+	return tc_get_cycles32(&clksrc);
+}
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
 
 struct tc_clkevt_device {
@@ -335,6 +346,7 @@  static int __init tcb_clksrc_init(struct device_node *node)
 	struct atmel_tc tc;
 	struct clk *t0_clk;
 	const struct of_device_id *match;
+	u64 (*tc_sched_clock)(void);
 	u32 rate, divided_rate = 0;
 	int best_divisor_idx = -1;
 	int clk32k_divisor_idx = -1;
@@ -419,6 +431,7 @@  static int __init tcb_clksrc_init(struct device_node *node)
 		clksrc.read = tc_get_cycles32;
 		/* setup ony channel 0 */
 		tcb_setup_single_chan(&tc, best_divisor_idx);
+		tc_sched_clock = tc_sched_clock_read32;
 	} else {
 		/* we have three clocks no matter what the
 		 * underlying platform supports.
@@ -430,6 +443,7 @@  static int __init tcb_clksrc_init(struct device_node *node)
 		}
 		/* setup both channel 0 & 1 */
 		tcb_setup_dual_chan(&tc, best_divisor_idx);
+		tc_sched_clock = tc_sched_clock_read;
 	}
 
 	/* and away we go! */
@@ -442,6 +456,8 @@  static int __init tcb_clksrc_init(struct device_node *node)
 	if (ret)
 		goto err_unregister_clksrc;
 
+	sched_clock_register(tc_sched_clock, 32, divided_rate);
+
 	return 0;
 
 err_unregister_clksrc: