diff mbox series

[Xen-devel,MM-PART2,RESEND,v2,17/19] xen/arm: mm: Initialize page-tables earlier

Message ID 20190514122456.28559-18-julien.grall@arm.com
State New
Headers show
Series xen/arm: Clean-up & fixes in boot/mm code | expand

Commit Message

Julien Grall May 14, 2019, 12:24 p.m. UTC
Since commit f60658c6ae "xen/arm: Stop relocating Xen", the function
setup_page_tables() does not require any information from the FDT.

So the initialization of the page-tables can be done much earlier in the
boot process. The earliest setup_page_tables() can be called is after
traps have been initialized, so we can get backtrace if an error
occurred.

Moving the initialization of the page-tables also avoid the dance to map
the FDT again in the new set of page-tables.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>

---
    Changes in v2:
        - Add Andrii's reviewed-by
---
 xen/arch/arm/mm.c    | 12 +++---------
 xen/arch/arm/setup.c |  4 ++--
 2 files changed, 5 insertions(+), 11 deletions(-)

Comments

Stefano Stabellini June 4, 2019, 11:12 p.m. UTC | #1
On Tue, 14 May 2019, Julien Grall wrote:
> Since commit f60658c6ae "xen/arm: Stop relocating Xen", the function
> setup_page_tables() does not require any information from the FDT.
> 
> So the initialization of the page-tables can be done much earlier in the
> boot process. The earliest setup_page_tables() can be called is after
> traps have been initialized, so we can get backtrace if an error
> occurred.
> 
> Moving the initialization of the page-tables also avoid the dance to map
> the FDT again in the new set of page-tables.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>
> 
> ---
>     Changes in v2:
>         - Add Andrii's reviewed-by
> ---
>  xen/arch/arm/mm.c    | 12 +++---------
>  xen/arch/arm/setup.c |  4 ++--
>  2 files changed, 5 insertions(+), 11 deletions(-)
> 
> diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
> index 7502a14760..eacc1647e0 100644
> --- a/xen/arch/arm/mm.c
> +++ b/xen/arch/arm/mm.c
> @@ -550,7 +550,7 @@ static inline lpae_t pte_of_xenaddr(vaddr_t va)
>      return mfn_to_xen_entry(maddr_to_mfn(ma), MT_NORMAL);
>  }
>  
> -/* Map the FDT in the early boot page table */
> +/* Map the FDT in the runtime page table */

I think you can drop this comment now.

In any case:

Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>


>  void * __init early_fdt_map(paddr_t fdt_paddr)
>  {
>      /* We are using 2MB superpage for mapping the FDT */
> @@ -573,7 +573,7 @@ void * __init early_fdt_map(paddr_t fdt_paddr)
>      /* The FDT is mapped using 2MB superpage */
>      BUILD_BUG_ON(BOOT_FDT_VIRT_START % SZ_2M);
>  
> -    create_mappings(boot_second, BOOT_FDT_VIRT_START, paddr_to_pfn(base_paddr),
> +    create_mappings(xen_second, BOOT_FDT_VIRT_START, paddr_to_pfn(base_paddr),
>                      SZ_2M >> PAGE_SHIFT, SZ_2M);
>  
>      offset = fdt_paddr % SECOND_SIZE;
> @@ -588,7 +588,7 @@ void * __init early_fdt_map(paddr_t fdt_paddr)
>  
>      if ( (offset + size) > SZ_2M )
>      {
> -        create_mappings(boot_second, BOOT_FDT_VIRT_START + SZ_2M,
> +        create_mappings(xen_second, BOOT_FDT_VIRT_START + SZ_2M,
>                          paddr_to_pfn(base_paddr + SZ_2M),
>                          SZ_2M >> PAGE_SHIFT, SZ_2M);
>      }
> @@ -699,12 +699,6 @@ void __init setup_pagetables(unsigned long boot_phys_offset)
>      pte.pt.table = 1;
>      xen_second[second_table_offset(FIXMAP_ADDR(0))] = pte;
>  
> -    /* ... DTB */
> -    pte = boot_second[second_table_offset(BOOT_FDT_VIRT_START)];
> -    xen_second[second_table_offset(BOOT_FDT_VIRT_START)] = pte;
> -    pte = boot_second[second_table_offset(BOOT_FDT_VIRT_START + SZ_2M)];
> -    xen_second[second_table_offset(BOOT_FDT_VIRT_START + SZ_2M)] = pte;
> -
>  #ifdef CONFIG_ARM_64
>      ttbr = (uintptr_t) xen_pgtable + phys_offset;
>  #else
> diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
> index 2f714d8b37..889da40d8d 100644
> --- a/xen/arch/arm/setup.c
> +++ b/xen/arch/arm/setup.c
> @@ -759,6 +759,8 @@ void __init start_xen(unsigned long boot_phys_offset,
>      /* Initialize traps early allow us to get backtrace when an error occurred */
>      init_traps();
>  
> +    setup_pagetables(boot_phys_offset);
> +
>      smp_clear_cpu_maps();
>  
>      device_tree_flattened = early_fdt_map(fdt_paddr);
> @@ -780,8 +782,6 @@ void __init start_xen(unsigned long boot_phys_offset,
>                               (paddr_t)(uintptr_t)(_end - _start + 1), false);
>      BUG_ON(!xen_bootmodule);
>  
> -    setup_pagetables(boot_phys_offset);
> -
>      setup_mm(fdt_paddr, fdt_size);
>  
>      /* Parse the ACPI tables for possible boot-time configuration */
> -- 
> 2.11.0
>
Julien Grall June 6, 2019, 5:32 p.m. UTC | #2
Hi Stefano,

On 05/06/2019 00:12, Stefano Stabellini wrote:
> On Tue, 14 May 2019, Julien Grall wrote:
>> Since commit f60658c6ae "xen/arm: Stop relocating Xen", the function
>> setup_page_tables() does not require any information from the FDT.
>>
>> So the initialization of the page-tables can be done much earlier in the
>> boot process. The earliest setup_page_tables() can be called is after
>> traps have been initialized, so we can get backtrace if an error
>> occurred.
>>
>> Moving the initialization of the page-tables also avoid the dance to map
>> the FDT again in the new set of page-tables.
>>
>> Signed-off-by: Julien Grall <julien.grall@arm.com>
>> Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>
>>
>> ---
>>      Changes in v2:
>>          - Add Andrii's reviewed-by
>> ---
>>   xen/arch/arm/mm.c    | 12 +++---------
>>   xen/arch/arm/setup.c |  4 ++--
>>   2 files changed, 5 insertions(+), 11 deletions(-)
>>
>> diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
>> index 7502a14760..eacc1647e0 100644
>> --- a/xen/arch/arm/mm.c
>> +++ b/xen/arch/arm/mm.c
>> @@ -550,7 +550,7 @@ static inline lpae_t pte_of_xenaddr(vaddr_t va)
>>       return mfn_to_xen_entry(maddr_to_mfn(ma), MT_NORMAL);
>>   }
>>   
>> -/* Map the FDT in the early boot page table */
>> +/* Map the FDT in the runtime page table */
> 
> I think you can drop this comment now.

Good point, the more the plan is to have only one set of page-tables.

> 
> In any case:
> 
> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

Thank you for the review!

Cheers,
diff mbox series

Patch

diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index 7502a14760..eacc1647e0 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -550,7 +550,7 @@  static inline lpae_t pte_of_xenaddr(vaddr_t va)
     return mfn_to_xen_entry(maddr_to_mfn(ma), MT_NORMAL);
 }
 
-/* Map the FDT in the early boot page table */
+/* Map the FDT in the runtime page table */
 void * __init early_fdt_map(paddr_t fdt_paddr)
 {
     /* We are using 2MB superpage for mapping the FDT */
@@ -573,7 +573,7 @@  void * __init early_fdt_map(paddr_t fdt_paddr)
     /* The FDT is mapped using 2MB superpage */
     BUILD_BUG_ON(BOOT_FDT_VIRT_START % SZ_2M);
 
-    create_mappings(boot_second, BOOT_FDT_VIRT_START, paddr_to_pfn(base_paddr),
+    create_mappings(xen_second, BOOT_FDT_VIRT_START, paddr_to_pfn(base_paddr),
                     SZ_2M >> PAGE_SHIFT, SZ_2M);
 
     offset = fdt_paddr % SECOND_SIZE;
@@ -588,7 +588,7 @@  void * __init early_fdt_map(paddr_t fdt_paddr)
 
     if ( (offset + size) > SZ_2M )
     {
-        create_mappings(boot_second, BOOT_FDT_VIRT_START + SZ_2M,
+        create_mappings(xen_second, BOOT_FDT_VIRT_START + SZ_2M,
                         paddr_to_pfn(base_paddr + SZ_2M),
                         SZ_2M >> PAGE_SHIFT, SZ_2M);
     }
@@ -699,12 +699,6 @@  void __init setup_pagetables(unsigned long boot_phys_offset)
     pte.pt.table = 1;
     xen_second[second_table_offset(FIXMAP_ADDR(0))] = pte;
 
-    /* ... DTB */
-    pte = boot_second[second_table_offset(BOOT_FDT_VIRT_START)];
-    xen_second[second_table_offset(BOOT_FDT_VIRT_START)] = pte;
-    pte = boot_second[second_table_offset(BOOT_FDT_VIRT_START + SZ_2M)];
-    xen_second[second_table_offset(BOOT_FDT_VIRT_START + SZ_2M)] = pte;
-
 #ifdef CONFIG_ARM_64
     ttbr = (uintptr_t) xen_pgtable + phys_offset;
 #else
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 2f714d8b37..889da40d8d 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -759,6 +759,8 @@  void __init start_xen(unsigned long boot_phys_offset,
     /* Initialize traps early allow us to get backtrace when an error occurred */
     init_traps();
 
+    setup_pagetables(boot_phys_offset);
+
     smp_clear_cpu_maps();
 
     device_tree_flattened = early_fdt_map(fdt_paddr);
@@ -780,8 +782,6 @@  void __init start_xen(unsigned long boot_phys_offset,
                              (paddr_t)(uintptr_t)(_end - _start + 1), false);
     BUG_ON(!xen_bootmodule);
 
-    setup_pagetables(boot_phys_offset);
-
     setup_mm(fdt_paddr, fdt_size);
 
     /* Parse the ACPI tables for possible boot-time configuration */