diff mbox

[27/63] ARM: ux500: Pass remnant platform data though to DMA40 driver

Message ID 1367591569-32197-28-git-send-email-lee.jones@linaro.org
State Accepted
Commit 252f27b0f21a875601ced115893f34f37e37ecbf
Headers show

Commit Message

Lee Jones May 3, 2013, 2:32 p.m. UTC 
Ironically, in order to remove lots of the auxdata assignments, we have
to add just one more. A lot of them require DMA information to be passed
into clients for DMA channel allocation, but we now have this capability
in Device Tree. However, the DMA40 driver still relies on a reverse table
look-up to obtain DMA addresses. Until all of the clients are converted,
over to the new API, we're stuck with this.

Also, now the DMA40 has been DT:ed, there's no requirement to register
it using traditional methods, so let's remove it.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500.h   |    1 +
 arch/arm/mach-ux500/cpu-db8500.c     |   13 +++----------
 arch/arm/mach-ux500/devices-db8500.c |    2 +-
 3 files changed, 5 insertions(+), 11 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index d38951b..2c5139d 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -93,6 +93,7 @@  extern struct amba_pl011_data uart0_plat;
 extern struct amba_pl011_data uart1_plat;
 extern struct amba_pl011_data uart2_plat;
 extern struct pl022_ssp_controller ssp0_plat;
+extern struct stedma40_platform_data dma40_plat_data;
 
 extern void mop500_sdi_init(struct device *parent);
 extern void snowball_sdi_init(struct device *parent);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index d769459..b22faa8 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -229,16 +229,6 @@  static struct device * __init u8500_of_init_devices(void)
 
 	db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
 
-	u8500_dma40_device.dev.parent = parent;
-
-	/*
-	 * Devices to be DT:ed:
-	 *   u8500_dma40_device  = todo
-	 *   db8500_pmu_device   = done
-	 *   db8500_prcmu_device = done
-	 */
-	platform_device_register(&u8500_dma40_device);
-
 	return parent;
 }
 
@@ -283,6 +273,9 @@  static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 		"ux500-msp-i2s.2", &msp2_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
 		"ux500-msp-i2s.3", &msp3_platform_data),
+	/* Requires clock name bindings and channel address lookup table. */
+	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000,
+		       "dma40.0", &dma40_plat_data),
 	{},
 };
 
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 99bc532..2bc4b5e 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -120,7 +120,7 @@  static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
 	[DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
 };
 
-static struct stedma40_platform_data dma40_plat_data = {
+struct stedma40_platform_data dma40_plat_data = {
 	.dev_rx = dma40_rx_map,
 	.dev_tx = dma40_tx_map,
 	.disabled_channels = {-1},