@@ -423,6 +423,16 @@ config PWM_SPEAR
To compile this driver as a module, choose M here: the module
will be called pwm-spear.
+config PWM_SPRD
+ tristate "Spreadtrum PWM support"
+ depends on ARCH_SPRD || COMPILE_TEST
+ help
+ Generic PWM framework driver for the PWM controller on
+ Spreadtrum SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-sprd.
+
config PWM_STI
tristate "STiH4xx PWM support"
depends on ARCH_STI
@@ -41,6 +41,7 @@ obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
+obj-$(CONFIG_PWM_SPRD) += pwm-sprd.o
obj-$(CONFIG_PWM_STI) += pwm-sti.o
obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
new file mode 100644
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Spreadtrum Communications Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define SPRD_PWM_PRESCALE 0x0
+#define SPRD_PWM_MOD 0x4
+#define SPRD_PWM_DUTY 0x8
+#define SPRD_PWM_DIV 0xc
+#define SPRD_PWM_PAT_LOW 0x10
+#define SPRD_PWM_PAT_HIGH 0x14
+#define SPRD_PWM_ENABLE 0x18
+
+#define SPRD_PWM_MOD_MAX GENMASK(7, 0)
+#define SPRD_PWM_REG_MSK GENMASK(15, 0)
+#define SPRD_PWM_ENABLE_BIT BIT(0)
+
+#define SPRD_PWM_NUM 4
+#define SPRD_PWM_REGS_SHIFT 5
+#define SPRD_PWM_NUM_CLKS 2
+#define SPRD_PWM_DEFAULT_CLK 26000000UL
+
+struct sprd_pwm_chn {
+ struct clk_bulk_data clks[SPRD_PWM_NUM_CLKS];
+ unsigned long clk_rate;
+ bool clk_enabled;
+};
+
+struct sprd_pwm_chip {
+ void __iomem *base;
+ struct device *dev;
+ struct pwm_chip chip;
+ int num_pwms;
+ struct sprd_pwm_chn chn[SPRD_PWM_NUM];
+};
+
+/* list of clocks required by PWM channels */
+static const char * const sprd_pwm_clks[] = {
+ "enable0", "pwm0",
+ "enable1", "pwm1",
+ "enable2", "pwm2",
+ "enable3", "pwm3",
+};
+
+static u32 sprd_pwm_read(struct sprd_pwm_chip *chip, u32 num, u32 reg)
+{
+ u32 offset = reg + (num << SPRD_PWM_REGS_SHIFT);
+
+ return readl_relaxed(chip->base + offset);
+}
+
+static void sprd_pwm_write(struct sprd_pwm_chip *chip, u32 num,
+ u32 reg, u32 val)
+{
+ u32 offset = reg + (num << SPRD_PWM_REGS_SHIFT);
+
+ writel_relaxed(val, chip->base + offset);
+}
+
+static int sprd_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct sprd_pwm_chip *spc =
+ container_of(chip, struct sprd_pwm_chip, chip);
+ struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
+ u64 div, tmp;
+ u32 prescale, duty;
+ int ret;
+
+ /*
+ * NOTE: the clocks to PWM channel has to be enabled first before
+ * writing to the registers.
+ */
+ if (!chn->clk_enabled) {
+ ret = clk_bulk_prepare_enable(SPRD_PWM_NUM_CLKS, chn->clks);
+ if (ret) {
+ dev_err(spc->dev, "failed to enable pwm%u clock\n",
+ pwm->hwpwm);
+ return ret;
+ }
+
+ chn->clk_enabled = true;
+ }
+
+ duty = duty_ns * SPRD_PWM_MOD_MAX / period_ns;
+
+ /*
+ * According to the datasheet, the period_ns calculation formula
+ * should be:
+ * period_ns = 10^9 * (prescale + 1) * mod / clk_rate
+ *
+ * Then we can get the prescale formula:
+ * prescale = (period_ns * clk_rate) / (10^9 * mod) -1
+ */
+ tmp = chn->clk_rate * period_ns;
+ div = 1000000000ULL * SPRD_PWM_MOD_MAX;
+ prescale = div64_u64(tmp, div) - 1;
+
+ sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_MOD, SPRD_PWM_MOD_MAX);
+ sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_DUTY, duty);
+ sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_PAT_LOW, SPRD_PWM_REG_MSK);
+ sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_PAT_HIGH, SPRD_PWM_REG_MSK);
+ sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_PRESCALE, prescale);
+
+ return 0;
+}
+
+static int sprd_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct sprd_pwm_chip *spc =
+ container_of(chip, struct sprd_pwm_chip, chip);
+ struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
+ int ret;
+
+ if (!chn->clk_enabled) {
+ ret = clk_bulk_prepare_enable(SPRD_PWM_NUM_CLKS, chn->clks);
+ if (ret) {
+ dev_err(spc->dev, "failed to enable pwm%u clocks\n",
+ pwm->hwpwm);
+ return ret;
+ }
+
+ chn->clk_enabled = true;
+ }
+
+ sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 1);
+
+ return 0;
+}
+
+static void sprd_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct sprd_pwm_chip *spc =
+ container_of(chip, struct sprd_pwm_chip, chip);
+ struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
+
+ sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 0);
+
+ if (chn->clk_enabled) {
+ clk_bulk_disable_unprepare(SPRD_PWM_NUM_CLKS, chn->clks);
+ chn->clk_enabled = false;
+ }
+}
+
+static void sprd_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct sprd_pwm_chip *spc =
+ container_of(chip, struct sprd_pwm_chip, chip);
+ struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
+ u32 enabled, duty, prescale;
+ u64 tmp;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(SPRD_PWM_NUM_CLKS, chn->clks);
+ if (ret) {
+ dev_err(spc->dev, "failed to enable pwm%u clocks\n",
+ pwm->hwpwm);
+ return;
+ }
+
+ chn->clk_enabled = true;
+
+ duty = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_DUTY) & SPRD_PWM_REG_MSK;
+ prescale = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_PRESCALE) & SPRD_PWM_REG_MSK;
+ enabled = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_ENABLE) & SPRD_PWM_ENABLE_BIT;
+
+ /*
+ * According to the datasheet, the period_ns and duty_ns calculation
+ * formula should be:
+ * period_ns = 10^9 * (prescale + 1) * mod / clk_rate
+ * duty_ns = 10^9 * (prescale + 1) * duty / clk_rate
+ */
+ tmp = (prescale + 1) * 1000000000ULL * SPRD_PWM_MOD_MAX;
+ state->period = div64_u64(tmp, chn->clk_rate);
+
+ tmp = (prescale + 1) * 1000000000ULL * duty;
+ state->duty_cycle = div64_u64(tmp, chn->clk_rate);
+
+ state->enabled = !!enabled;
+
+ /* Disable PWM clocks if the PWM channel is not in enable state. */
+ if (!enabled) {
+ clk_bulk_disable_unprepare(SPRD_PWM_NUM_CLKS, chn->clks);
+ chn->clk_enabled = false;
+ }
+}
+
+static const struct pwm_ops sprd_pwm_ops = {
+ .config = sprd_pwm_config,
+ .enable = sprd_pwm_enable,
+ .disable = sprd_pwm_disable,
+ .get_state = sprd_pwm_get_state,
+ .owner = THIS_MODULE,
+};
+
+static int sprd_pwm_clk_init(struct sprd_pwm_chip *spc)
+{
+ struct clk *clk_parent, *clk_pwm;
+ int ret, i, clk_index = 0;
+
+ clk_parent = devm_clk_get(spc->dev, "source");
+ if (IS_ERR(clk_parent)) {
+ dev_err(spc->dev, "failed to get source clock\n");
+ return PTR_ERR(clk_parent);
+ }
+
+ for (i = 0; i < SPRD_PWM_NUM; i++) {
+ struct sprd_pwm_chn *chn = &spc->chn[i];
+ int j;
+
+ for (j = 0; j < SPRD_PWM_NUM_CLKS; ++j)
+ chn->clks[j].id = sprd_pwm_clks[clk_index++];
+
+ ret = devm_clk_bulk_get(spc->dev, SPRD_PWM_NUM_CLKS, chn->clks);
+ if (ret) {
+ if (ret == -ENOENT)
+ break;
+
+ dev_err(spc->dev, "failed to get channel clocks\n");
+ return ret;
+ }
+
+ clk_pwm = chn->clks[1].clk;
+ if (!clk_set_parent(clk_pwm, clk_parent))
+ chn->clk_rate = clk_get_rate(clk_pwm);
+ else
+ chn->clk_rate = SPRD_PWM_DEFAULT_CLK;
+ }
+
+ if (!i) {
+ dev_err(spc->dev, "no availbale PWM channels\n");
+ return -EINVAL;
+ }
+
+ spc->num_pwms = i;
+
+ return 0;
+}
+
+static int sprd_pwm_probe(struct platform_device *pdev)
+{
+ struct sprd_pwm_chip *spc;
+ int ret;
+
+ spc = devm_kzalloc(&pdev->dev, sizeof(*spc), GFP_KERNEL);
+ if (!spc)
+ return -ENOMEM;
+
+ spc->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(spc->base))
+ return PTR_ERR(spc->base);
+
+ spc->dev = &pdev->dev;
+ ret = sprd_pwm_clk_init(spc);
+ if (ret)
+ return ret;
+
+ spc->chip.dev = &pdev->dev;
+ spc->chip.ops = &sprd_pwm_ops;
+ spc->chip.base = -1;
+ spc->chip.npwm = spc->num_pwms;
+
+ ret = pwmchip_add(&spc->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add PWM chip\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, spc);
+ return 0;
+}
+
+static int sprd_pwm_remove(struct platform_device *pdev)
+{
+ struct sprd_pwm_chip *spc = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < spc->num_pwms; i++)
+ pwm_disable(&spc->chip.pwms[i]);
+
+ return pwmchip_remove(&spc->chip);
+}
+
+static const struct of_device_id sprd_pwm_of_match[] = {
+ { .compatible = "sprd,ums512-pwm", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sprd_pwm_of_match);
+
+static struct platform_driver sprd_pwm_driver = {
+ .driver = {
+ .name = "sprd-pwm",
+ .of_match_table = sprd_pwm_of_match,
+ },
+ .probe = sprd_pwm_probe,
+ .remove = sprd_pwm_remove,
+};
+
+module_platform_driver(sprd_pwm_driver);
+
+MODULE_DESCRIPTION("Spreadtrum PWM Driver");
+MODULE_LICENSE("GPL v2");