diff mbox

ARM: ux500: register LP5521 LEDs in the device tree

Message ID 1369210331-18545-1-git-send-email-linus.walleij@stericsson.com
State Accepted
Commit 2bd7378f9caa380790ce0cddc0b4547bce14ec06
Headers show

Commit Message

Linus Walleij May 22, 2013, 8:12 a.m. UTC 
From: Linus Walleij <linus.walleij@linaro.org>

Based on pending device tree support in the LP55xx drivers
we can add the correct LED and channel configuration from the
ux500 device tree for all HREF variants.

Cc: Milo Kim <Milo.Kim@ti.com>
Cc: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/href.dtsi | 38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index 62523f6..e315429 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -63,16 +63,42 @@ 
 		};
 
 		i2c@80128000 {
-			lp5521@0x33 {
-				compatible = "lp5521";
+			lp5521@33 {
+				compatible = "national,lp5521";
 				reg = <0x33>;
+				label = "lp5521_pri";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
-			lp5521@0x34 {
-				compatible = "lp5521";
+			lp5521@34 {
+				compatible = "national,lp5521";
 				reg = <0x34>;
+				label = "lp5521_sec";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
 			bh1780@0x29 {
 				compatible = "rohm,bh1780gli";
 				reg = <0x33>;