@@ -424,8 +424,11 @@ int uniphier_aio_dai_suspend(struct snd_soc_dai *dai)
{
struct uniphier_aio *aio = uniphier_priv(dai);
- reset_control_assert(aio->chip->rst);
- clk_disable_unprepare(aio->chip->clk);
+ aio->chip->num_wup_aios--;
+ if (!aio->chip->num_wup_aios) {
+ reset_control_assert(aio->chip->rst);
+ clk_disable_unprepare(aio->chip->clk);
+ }
return 0;
}
@@ -439,13 +442,15 @@ int uniphier_aio_dai_resume(struct snd_soc_dai *dai)
if (!aio->chip->active)
return 0;
- ret = clk_prepare_enable(aio->chip->clk);
- if (ret)
- return ret;
+ if (!aio->chip->num_wup_aios) {
+ ret = clk_prepare_enable(aio->chip->clk);
+ if (ret)
+ return ret;
- ret = reset_control_deassert(aio->chip->rst);
- if (ret)
- goto err_out_clock;
+ ret = reset_control_deassert(aio->chip->rst);
+ if (ret)
+ goto err_out_clock;
+ }
aio_iecout_set_enable(aio->chip, true);
aio_chip_init(aio->chip);
@@ -458,7 +463,7 @@ int uniphier_aio_dai_resume(struct snd_soc_dai *dai)
ret = aio_init(sub);
if (ret)
- goto err_out_clock;
+ goto err_out_reset;
if (!sub->setting)
continue;
@@ -466,11 +471,16 @@ int uniphier_aio_dai_resume(struct snd_soc_dai *dai)
aio_port_reset(sub);
aio_src_reset(sub);
}
+ aio->chip->num_wup_aios++;
return 0;
+err_out_reset:
+ if (!aio->chip->num_wup_aios)
+ reset_control_assert(aio->chip->rst);
err_out_clock:
- clk_disable_unprepare(aio->chip->clk);
+ if (!aio->chip->num_wup_aios)
+ clk_disable_unprepare(aio->chip->clk);
return ret;
}
@@ -619,6 +629,7 @@ int uniphier_aio_probe(struct platform_device *pdev)
return PTR_ERR(chip->rst);
chip->num_aios = chip->chip_spec->num_dais;
+ chip->num_wup_aios = chip->num_aios;
chip->aios = devm_kcalloc(dev,
chip->num_aios, sizeof(struct uniphier_aio),
GFP_KERNEL);
@@ -285,6 +285,7 @@ struct uniphier_aio_chip {
struct uniphier_aio *aios;
int num_aios;
+ int num_wup_aios;
struct uniphier_aio_pll *plls;
int num_plls;
When transitioning to supend state, uniphier_aio_dai_suspend() is called and asserts reset lines and disables clocks. However, if there are two or more DAIs, uniphier_aio_dai_suspend() are called multiple times, and double reset assersion will cause. This patch defines the counter that has the number of DAIs at first, and whenever uniphier_aio_dai_suspend() are called, it decrements the counter. And only if the counter is zero, it asserts reset lines and disables clocks. In the same way, uniphier_aio_dai_resume() are called, it increments the counter after deasserting reset lines and enabling clocks. Fixes: 139a34200233 ("ASoC: uniphier: add support for UniPhier AIO CPU DAI driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- sound/soc/uniphier/aio-cpu.c | 31 +++++++++++++++++++++---------- sound/soc/uniphier/aio.h | 1 + 2 files changed, 22 insertions(+), 10 deletions(-) -- 2.7.4