[v2,2/3] dt-bindings: Convert Arm Mali Bifrost GPU to DT schema

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
deleted file mode 100644
index b8be9dbc68b4..000000000000
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
+++ /dev/null
@@ -1,92 +0,0 @@ 
-ARM Mali Bifrost GPU
-====================
-
-Required properties:
-
-- compatible :
-  * Since Mali Bifrost GPU model/revision is fully discoverable by reading
-    some determined registers, must contain the following:
-    + "arm,mali-bifrost"
-  * which must be preceded by one of the following vendor specifics:
-    + "amlogic,meson-g12a-mali"
-
-- reg : Physical base address of the device and length of the register area.
-
-- interrupts : Contains the three IRQ lines required by Mali Bifrost devices,
-  in the following defined order.
-
-- interrupt-names : Contains the names of IRQ resources in this exact defined
-  order: "job", "mmu", "gpu".
-
-Optional properties:
-
-- clocks : Phandle to clock for the Mali Bifrost device.
-
-- mali-supply : Phandle to regulator for the Mali device. Refer to
-  Documentation/devicetree/bindings/regulator/regulator.txt for details.
-
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
-  for details.
-
-- resets : Phandle of the GPU reset line.
-
-Vendor-specific bindings
-------------------------
-
-The Mali GPU is integrated very differently from one SoC to
-another. In order to accommodate those differences, you have the option
-to specify one more vendor-specific compatible, among:
-
-- "amlogic,meson-g12a-mali"
-  Required properties:
-  - resets : Should contain phandles of :
-    + GPU reset line
-    + GPU APB glue reset line
-
-Example for a Mali-G31:
-
-gpu@ffa30000 {
-	compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
-	reg = <0xffe40000 0x10000>;
-	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "job", "mmu", "gpu";
-	clocks = <&clk CLKID_MALI>;
-	mali-supply = <&vdd_gpu>;
-	operating-points-v2 = <&gpu_opp_table>;
-	resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-};
-
-gpu_opp_table: opp_table0 {
-	compatible = "operating-points-v2";
-
-	opp@533000000 {
-		opp-hz = /bits/ 64 <533000000>;
-		opp-microvolt = <1250000>;
-	};
-	opp@450000000 {
-		opp-hz = /bits/ 64 <450000000>;
-		opp-microvolt = <1150000>;
-	};
-	opp@400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <1125000>;
-	};
-	opp@350000000 {
-		opp-hz = /bits/ 64 <350000000>;
-		opp-microvolt = <1075000>;
-	};
-	opp@266000000 {
-		opp-hz = /bits/ 64 <266000000>;
-		opp-microvolt = <1025000>;
-	};
-	opp@160000000 {
-		opp-hz = /bits/ 64 <160000000>;
-		opp-microvolt = <925000>;
-	};
-	opp@100000000 {
-		opp-hz = /bits/ 64 <100000000>;
-		opp-microvolt = <912500>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
new file mode 100644
index 000000000000..5f1fd6d7ee0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -0,0 +1,116 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Bifrost GPU
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson-g12a-mali
+      - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    maxItems: 1
+
+  mali-supply:
+    maxItems: 1
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amlogic,meson-g12a-mali
+    then:
+      properties:
+        resets:
+          minItems: 2
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu@ffe40000 {
+      compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+      reg = <0xffe40000 0x10000>;
+      interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "job", "mmu", "gpu";
+      clocks = <&clk 1>;
+      mali-supply = <&vdd_gpu>;
+      operating-points-v2 = <&gpu_opp_table>;
+      resets = <&reset 0>, <&reset 1>;
+    };
+
+    gpu_opp_table: opp_table0 {
+      compatible = "operating-points-v2";
+
+      opp@533000000 {
+        opp-hz = /bits/ 64 <533000000>;
+        opp-microvolt = <1250000>;
+      };
+      opp@450000000 {
+        opp-hz = /bits/ 64 <450000000>;
+        opp-microvolt = <1150000>;
+      };
+      opp@400000000 {
+        opp-hz = /bits/ 64 <400000000>;
+        opp-microvolt = <1125000>;
+      };
+      opp@350000000 {
+        opp-hz = /bits/ 64 <350000000>;
+        opp-microvolt = <1075000>;
+      };
+      opp@266000000 {
+        opp-hz = /bits/ 64 <266000000>;
+        opp-microvolt = <1025000>;
+      };
+      opp@160000000 {
+        opp-hz = /bits/ 64 <160000000>;
+        opp-microvolt = <925000>;
+      };
+      opp@100000000 {
+        opp-hz = /bits/ 64 <100000000>;
+        opp-microvolt = <912500>;
+      };
+    };
+
+...