diff mbox series

[11/11] mmc: sdhci: Convert to use sdio_irq_enabled()

Message ID 20190903142207.5825-12-ulf.hansson@linaro.org
State Superseded
Headers show
Series mmc: core: PM fixes/improvements for SDIO IRQs | expand

Commit Message

Ulf Hansson Sept. 3, 2019, 2:22 p.m. UTC
Instead of keeping track of whether SDIO IRQs have been enabled via an
internal sdhci status flag, avoid the open-coding and convert into using
sdio_irq_enabled().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

---
 drivers/mmc/host/sdhci.c | 7 +------
 drivers/mmc/host/sdhci.h | 1 -
 2 files changed, 1 insertion(+), 7 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a7df22ed65aa..4b4db41aec50 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2142,11 +2142,6 @@  void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 		pm_runtime_get_noresume(host->mmc->parent);
 
 	spin_lock_irqsave(&host->lock, flags);
-	if (enable)
-		host->flags |= SDHCI_SDIO_IRQ_ENABLED;
-	else
-		host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
-
 	sdhci_enable_sdio_irq_nolock(host, enable);
 	spin_unlock_irqrestore(&host->lock, flags);
 
@@ -3380,7 +3375,7 @@  int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset)
 	host->runtime_suspended = false;
 
 	/* Enable SDIO IRQ */
-	if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
+	if (sdio_irq_enabled(mmc))
 		sdhci_enable_sdio_irq_nolock(host, true);
 
 	/* Enable Card Detection */
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 8effaac61c3a..a29c4cd2d92e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -512,7 +512,6 @@  struct sdhci_host {
 #define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
 #define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
 #define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
-#define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
 #define SDHCI_USE_64_BIT_DMA	(1<<12)	/* Use 64-bit DMA */
 #define SDHCI_HS400_TUNING	(1<<13)	/* Tuning for HS400 */
 #define SDHCI_SIGNALING_330	(1<<14)	/* Host is capable of 3.3V signaling */