diff mbox series

[5.2,04/45] phy: qcom-qmp: Correct ready status, again

Message ID 20190929135025.804167576@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Sept. 29, 2019, 1:55 p.m. UTC 
From: Bjorn Andersson <bjorn.andersson@linaro.org>


[ Upstream commit 14ced7e3a1ae9bed7051df3718c8c7b583854a5c ]

Despite extensive testing of commit 885bd765963b ("phy: qcom-qmp: Correct
READY_STATUS poll break condition") I failed to conclude that the
PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as
the PHY gets ready. Similar to the prior bug with UFS the code will
generally get past the check before the transition and thereby
"succeed".

Correct the name of the register used PCIe and USB3 PHYs, replace
mask_pcs_ready with a constant expression depending on the type of the
PHY and check for the appropriate ready state.

Cc: stable@vger.kernel.org
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 33 ++++++++++++++---------------
 1 file changed, 16 insertions(+), 17 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 99b3bc04d215a..7e171d37bcd6f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -35,7 +35,7 @@ 
 #define PLL_READY_GATE_EN			BIT(3)
 /* QPHY_PCS_STATUS bit */
 #define PHYSTATUS				BIT(6)
-/* QPHY_COM_PCS_READY_STATUS bit */
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
 /* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
@@ -115,6 +115,7 @@  enum qphy_reg_layout {
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
 	QPHY_PCS_READY_STATUS,
+	QPHY_PCS_STATUS,
 	QPHY_PCS_AUTONOMOUS_MODE_CTRL,
 	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
 	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
@@ -133,7 +134,7 @@  static const unsigned int pciephy_regs_layout[] = {
 	[QPHY_FLL_MAN_CODE]		= 0xd4,
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_READY_STATUS]		= 0x174,
+	[QPHY_PCS_STATUS]		= 0x174,
 };
 
 static const unsigned int usb3phy_regs_layout[] = {
@@ -144,7 +145,7 @@  static const unsigned int usb3phy_regs_layout[] = {
 	[QPHY_FLL_MAN_CODE]		= 0xd0,
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_READY_STATUS]		= 0x17c,
+	[QPHY_PCS_STATUS]		= 0x17c,
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d4,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0d8,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
@@ -153,7 +154,7 @@  static const unsigned int usb3phy_regs_layout[] = {
 static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_READY_STATUS]		= 0x174,
+	[QPHY_PCS_STATUS]		= 0x174,
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d8,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0dc,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
@@ -911,7 +912,6 @@  struct qmp_phy_cfg {
 
 	unsigned int start_ctrl;
 	unsigned int pwrdn_ctrl;
-	unsigned int mask_pcs_ready;
 	unsigned int mask_com_pcs_ready;
 
 	/* true, if PHY has a separate PHY_COM control block */
@@ -1074,7 +1074,6 @@  static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
 
 	.start_ctrl		= PCS_START | PLL_READY_GATE_EN,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_pcs_ready		= PHYSTATUS,
 	.mask_com_pcs_ready	= PCS_READY,
 
 	.has_phy_com_ctrl	= true,
@@ -1106,7 +1105,6 @@  static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PHYSTATUS,
 };
 
 /* list of resets */
@@ -1136,7 +1134,6 @@  static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_pcs_ready		= PHYSTATUS,
 
 	.has_phy_com_ctrl	= false,
 	.has_lane_rst		= false,
@@ -1167,7 +1164,6 @@  static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
@@ -1199,7 +1195,6 @@  static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
@@ -1226,7 +1221,6 @@  static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PCS_READY,
 
 	.is_dual_lane_phy	= true,
 	.no_pcs_sw_reset	= true,
@@ -1254,7 +1248,6 @@  static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
 
 	.start_ctrl             = SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_pcs_ready		= PHYSTATUS,
 	.mask_com_pcs_ready	= PCS_READY,
 };
 
@@ -1280,7 +1273,6 @@  static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
 
 	.start_ctrl             = SERDES_START | PCS_START,
 	.pwrdn_ctrl             = SW_PWRDN,
-	.mask_pcs_ready         = PHYSTATUS,
 
 	.is_dual_lane_phy       = true,
 };
@@ -1458,7 +1450,7 @@  static int qcom_qmp_phy_enable(struct phy *phy)
 	void __iomem *pcs = qphy->pcs;
 	void __iomem *dp_com = qmp->dp_com;
 	void __iomem *status;
-	unsigned int mask, val;
+	unsigned int mask, val, ready;
 	int ret;
 
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
@@ -1546,10 +1538,17 @@  static int qcom_qmp_phy_enable(struct phy *phy)
 	/* start SerDes and Phy-Coding-Sublayer */
 	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
 
-	status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
-	mask = cfg->mask_pcs_ready;
+	if (cfg->type == PHY_TYPE_UFS) {
+		status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+		mask = PCS_READY;
+		ready = PCS_READY;
+	} else {
+		status = pcs + cfg->regs[QPHY_PCS_STATUS];
+		mask = PHYSTATUS;
+		ready = 0;
+	}
 
-	ret = readl_poll_timeout(status, val, val & mask, 10,
+	ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
 				 PHY_INIT_COMPLETE_TIMEOUT);
 	if (ret) {
 		dev_err(qmp->dev, "phy initialization timed-out\n");