diff mbox

[v4,2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver

Message ID 1307290075-7062-3-git-send-email-shawn.guo@linaro.org
State Accepted
Commit b78d8e59a6f611e229fab8ec3014c58eba975000
Headers show

Commit Message

Shawn Guo June 5, 2011, 4:07 p.m. UTC
The patch makes necessary changes on gpio-mxc as below to turn it
into an upstanding gpio driver.

 * Add a list to save all mx2 ports references, so that
   mx2_gpio_irq_handler can walk through all interrupt status
   registers

 * Use readl/writel to replace mach-specific accessors
   __raw_readl/__raw_writel

 * Change mxc_gpio_init into mxc_gpio_probe function

 * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to
   be public at all, and also make some other cleanup on
   plat-mxc/include/mach/gpio.h at the same time

And the patch then migrates mach-imx and mach-mx5 to the updated
driver by adding corresponding platform devices.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
---
 arch/arm/mach-imx/mach-apf9328.c                |    2 +
 arch/arm/mach-imx/mach-armadillo5x0.c           |    2 +
 arch/arm/mach-imx/mach-bug.c                    |    2 +
 arch/arm/mach-imx/mach-cpuimx27.c               |    2 +
 arch/arm/mach-imx/mach-cpuimx35.c               |    2 +
 arch/arm/mach-imx/mach-eukrea_cpuimx25.c        |    2 +
 arch/arm/mach-imx/mach-imx27_visstrim_m10.c     |    2 +
 arch/arm/mach-imx/mach-imx27ipcam.c             |    2 +
 arch/arm/mach-imx/mach-imx27lite.c              |    2 +
 arch/arm/mach-imx/mach-kzm_arm11_01.c           |    2 +
 arch/arm/mach-imx/mach-mx1ads.c                 |    2 +
 arch/arm/mach-imx/mach-mx21ads.c                |    2 +
 arch/arm/mach-imx/mach-mx25_3ds.c               |    2 +
 arch/arm/mach-imx/mach-mx27_3ds.c               |    2 +
 arch/arm/mach-imx/mach-mx27ads.c                |    2 +
 arch/arm/mach-imx/mach-mx31_3ds.c               |    2 +
 arch/arm/mach-imx/mach-mx31ads.c                |    2 +
 arch/arm/mach-imx/mach-mx31lilly.c              |    2 +
 arch/arm/mach-imx/mach-mx31lite.c               |    2 +
 arch/arm/mach-imx/mach-mx31moboard.c            |    2 +
 arch/arm/mach-imx/mach-mx35_3ds.c               |    2 +
 arch/arm/mach-imx/mach-mxt_td60.c               |    2 +
 arch/arm/mach-imx/mach-pca100.c                 |    2 +
 arch/arm/mach-imx/mach-pcm037.c                 |    2 +
 arch/arm/mach-imx/mach-pcm038.c                 |    2 +
 arch/arm/mach-imx/mach-pcm043.c                 |    2 +
 arch/arm/mach-imx/mach-qong.c                   |    2 +
 arch/arm/mach-imx/mach-scb9328.c                |    2 +
 arch/arm/mach-imx/mach-vpr200.c                 |    2 +
 arch/arm/mach-imx/mm-imx1.c                     |   17 +-
 arch/arm/mach-imx/mm-imx21.c                    |   21 +--
 arch/arm/mach-imx/mm-imx25.c                    |   16 +-
 arch/arm/mach-imx/mm-imx27.c                    |   21 +--
 arch/arm/mach-imx/mm-imx31.c                    |   15 +-
 arch/arm/mach-imx/mm-imx35.c                    |   15 +-
 arch/arm/mach-mx5/board-cpuimx51.c              |    2 +
 arch/arm/mach-mx5/board-cpuimx51sd.c            |    2 +
 arch/arm/mach-mx5/board-mx50_rdp.c              |    2 +
 arch/arm/mach-mx5/board-mx51_3ds.c              |    2 +
 arch/arm/mach-mx5/board-mx51_babbage.c          |    2 +
 arch/arm/mach-mx5/board-mx51_efikamx.c          |    2 +
 arch/arm/mach-mx5/board-mx51_efikasb.c          |    2 +
 arch/arm/mach-mx5/board-mx53_evk.c              |    2 +
 arch/arm/mach-mx5/board-mx53_loco.c             |    2 +
 arch/arm/mach-mx5/board-mx53_smd.c              |    2 +
 arch/arm/mach-mx5/devices.c                     |   64 -------
 arch/arm/mach-mx5/mm-mx50.c                     |   21 +--
 arch/arm/mach-mx5/mm.c                          |   25 ++-
 arch/arm/plat-mxc/devices.c                     |   11 ++
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-gpio-mxc.c   |   32 ++++
 arch/arm/plat-mxc/include/mach/common.h         |   12 ++-
 arch/arm/plat-mxc/include/mach/devices-common.h |    2 +
 arch/arm/plat-mxc/include/mach/gpio.h           |   27 ---
 drivers/gpio/gpio-mxc.c                         |  217 +++++++++++++++--------
 55 files changed, 358 insertions(+), 237 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-gpio-mxc.c

Comments

Grant Likely June 6, 2011, 7:52 a.m. UTC | #1
On Mon, Jun 06, 2011 at 12:07:55AM +0800, Shawn Guo wrote:
> The patch makes necessary changes on gpio-mxc as below to turn it
> into an upstanding gpio driver.
> 
>  * Add a list to save all mx2 ports references, so that
>    mx2_gpio_irq_handler can walk through all interrupt status
>    registers
> 
>  * Use readl/writel to replace mach-specific accessors
>    __raw_readl/__raw_writel
> 
>  * Change mxc_gpio_init into mxc_gpio_probe function
> 
>  * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to
>    be public at all, and also make some other cleanup on
>    plat-mxc/include/mach/gpio.h at the same time
> 
> And the patch then migrates mach-imx and mach-mx5 to the updated
> driver by adding corresponding platform devices.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Acked-by: Olof Johansson <olof@lixom.net>

Applied, thanks.

g.

> ---
>  arch/arm/mach-imx/mach-apf9328.c                |    2 +
>  arch/arm/mach-imx/mach-armadillo5x0.c           |    2 +
>  arch/arm/mach-imx/mach-bug.c                    |    2 +
>  arch/arm/mach-imx/mach-cpuimx27.c               |    2 +
>  arch/arm/mach-imx/mach-cpuimx35.c               |    2 +
>  arch/arm/mach-imx/mach-eukrea_cpuimx25.c        |    2 +
>  arch/arm/mach-imx/mach-imx27_visstrim_m10.c     |    2 +
>  arch/arm/mach-imx/mach-imx27ipcam.c             |    2 +
>  arch/arm/mach-imx/mach-imx27lite.c              |    2 +
>  arch/arm/mach-imx/mach-kzm_arm11_01.c           |    2 +
>  arch/arm/mach-imx/mach-mx1ads.c                 |    2 +
>  arch/arm/mach-imx/mach-mx21ads.c                |    2 +
>  arch/arm/mach-imx/mach-mx25_3ds.c               |    2 +
>  arch/arm/mach-imx/mach-mx27_3ds.c               |    2 +
>  arch/arm/mach-imx/mach-mx27ads.c                |    2 +
>  arch/arm/mach-imx/mach-mx31_3ds.c               |    2 +
>  arch/arm/mach-imx/mach-mx31ads.c                |    2 +
>  arch/arm/mach-imx/mach-mx31lilly.c              |    2 +
>  arch/arm/mach-imx/mach-mx31lite.c               |    2 +
>  arch/arm/mach-imx/mach-mx31moboard.c            |    2 +
>  arch/arm/mach-imx/mach-mx35_3ds.c               |    2 +
>  arch/arm/mach-imx/mach-mxt_td60.c               |    2 +
>  arch/arm/mach-imx/mach-pca100.c                 |    2 +
>  arch/arm/mach-imx/mach-pcm037.c                 |    2 +
>  arch/arm/mach-imx/mach-pcm038.c                 |    2 +
>  arch/arm/mach-imx/mach-pcm043.c                 |    2 +
>  arch/arm/mach-imx/mach-qong.c                   |    2 +
>  arch/arm/mach-imx/mach-scb9328.c                |    2 +
>  arch/arm/mach-imx/mach-vpr200.c                 |    2 +
>  arch/arm/mach-imx/mm-imx1.c                     |   17 +-
>  arch/arm/mach-imx/mm-imx21.c                    |   21 +--
>  arch/arm/mach-imx/mm-imx25.c                    |   16 +-
>  arch/arm/mach-imx/mm-imx27.c                    |   21 +--
>  arch/arm/mach-imx/mm-imx31.c                    |   15 +-
>  arch/arm/mach-imx/mm-imx35.c                    |   15 +-
>  arch/arm/mach-mx5/board-cpuimx51.c              |    2 +
>  arch/arm/mach-mx5/board-cpuimx51sd.c            |    2 +
>  arch/arm/mach-mx5/board-mx50_rdp.c              |    2 +
>  arch/arm/mach-mx5/board-mx51_3ds.c              |    2 +
>  arch/arm/mach-mx5/board-mx51_babbage.c          |    2 +
>  arch/arm/mach-mx5/board-mx51_efikamx.c          |    2 +
>  arch/arm/mach-mx5/board-mx51_efikasb.c          |    2 +
>  arch/arm/mach-mx5/board-mx53_evk.c              |    2 +
>  arch/arm/mach-mx5/board-mx53_loco.c             |    2 +
>  arch/arm/mach-mx5/board-mx53_smd.c              |    2 +
>  arch/arm/mach-mx5/devices.c                     |   64 -------
>  arch/arm/mach-mx5/mm-mx50.c                     |   21 +--
>  arch/arm/mach-mx5/mm.c                          |   25 ++-
>  arch/arm/plat-mxc/devices.c                     |   11 ++
>  arch/arm/plat-mxc/devices/Makefile              |    1 +
>  arch/arm/plat-mxc/devices/platform-gpio-mxc.c   |   32 ++++
>  arch/arm/plat-mxc/include/mach/common.h         |   12 ++-
>  arch/arm/plat-mxc/include/mach/devices-common.h |    2 +
>  arch/arm/plat-mxc/include/mach/gpio.h           |   27 ---
>  drivers/gpio/gpio-mxc.c                         |  217 +++++++++++++++--------
>  55 files changed, 358 insertions(+), 237 deletions(-)
>  create mode 100644 arch/arm/plat-mxc/devices/platform-gpio-mxc.c
> 
> diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
> index 15e45c8..59d2a3b 100644
> --- a/arch/arm/mach-imx/mach-apf9328.c
> +++ b/arch/arm/mach-imx/mach-apf9328.c
> @@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = {
>  
>  static void __init apf9328_init(void)
>  {
> +	imx1_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(apf9328_pins,
>  			ARRAY_SIZE(apf9328_pins),
>  			"APF9328");
> diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
> index ffb40ff..ede2710 100644
> --- a/arch/arm/mach-imx/mach-armadillo5x0.c
> +++ b/arch/arm/mach-imx/mach-armadillo5x0.c
> @@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = {
>   */
>  static void __init armadillo5x0_init(void)
>  {
> +	imx31_soc_init();
> +
>  	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
>  			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
>  
> diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
> index 42e4f07..f494705 100644
> --- a/arch/arm/mach-imx/mach-bug.c
> +++ b/arch/arm/mach-imx/mach-bug.c
> @@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = {
>  
>  static void __init bug_board_init(void)
>  {
> +	imx31_soc_init();
> +
>  	mxc_iomux_setup_multiple_pins(bug_pins,
>  				      ARRAY_SIZE(bug_pins), "uart-4");
>  	imx31_add_imx_uart4(&uart_pdata);
> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
> index 46a2e41..87887ac 100644
> --- a/arch/arm/mach-imx/mach-cpuimx27.c
> +++ b/arch/arm/mach-imx/mach-cpuimx27.c
> @@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode);
>  
>  static void __init eukrea_cpuimx27_init(void)
>  {
> +	imx27_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
>  		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
>  
> diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
> index 3f8ef82..f39a478b 100644
> --- a/arch/arm/mach-imx/mach-cpuimx35.c
> +++ b/arch/arm/mach-imx/mach-cpuimx35.c
> @@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
>   */
>  static void __init eukrea_cpuimx35_init(void)
>  {
> +	imx35_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
>  			ARRAY_SIZE(eukrea_cpuimx35_pads));
>  
> diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
> index 148cff2..da36da5 100644
> --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
> +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
> @@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode);
>  
>  static void __init eukrea_cpuimx25_init(void)
>  {
> +	imx25_soc_init();
> +
>  	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
>  			ARRAY_SIZE(eukrea_cpuimx25_pads)))
>  		printk(KERN_ERR "error setting cpuimx25 pads !\n");
> diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
> index 7ae43b1..c6269d6 100644
> --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
> +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
> @@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void)
>  {
>  	int ret;
>  
> +	imx27_soc_init();
> +
>  	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
>  			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
>  	if (ret)
> diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
> index 9be6cd6..272f793 100644
> --- a/arch/arm/mach-imx/mach-imx27ipcam.c
> +++ b/arch/arm/mach-imx/mach-imx27ipcam.c
> @@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = {
>  
>  static void __init mx27ipcam_init(void)
>  {
> +	imx27_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
>  		"mx27ipcam");
>  
> diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
> index 8411405..d81a769 100644
> --- a/arch/arm/mach-imx/mach-imx27lite.c
> +++ b/arch/arm/mach-imx/mach-imx27lite.c
> @@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
>  
>  static void __init mx27lite_init(void)
>  {
> +	imx27_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
>  		"imx27lite");
>  	imx27_add_imx_uart0(&uart_pdata);
> diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
> index 1ecae20..e472a1d 100644
> --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
> +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
> @@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = {
>   */
>  static void __init kzm_board_init(void)
>  {
> +	imx31_soc_init();
> +
>  	mxc_iomux_setup_multiple_pins(kzm_pins,
>  				      ARRAY_SIZE(kzm_pins), "kzm");
>  	kzm_init_ext_uart();
> diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
> index 38ec5cb..5cd8bee 100644
> --- a/arch/arm/mach-imx/mach-mx1ads.c
> +++ b/arch/arm/mach-imx/mach-mx1ads.c
> @@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
>   */
>  static void __init mx1ads_init(void)
>  {
> +	imx1_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(mx1ads_pins,
>  		ARRAY_SIZE(mx1ads_pins), "mx1ads");
>  
> diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
> index 74ac889..d389ecf 100644
> --- a/arch/arm/mach-imx/mach-mx21ads.c
> +++ b/arch/arm/mach-imx/mach-mx21ads.c
> @@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = {
>  
>  static void __init mx21ads_board_init(void)
>  {
> +	imx21_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
>  			"mx21ads");
>  
> diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
> index 58ea3fd..01534bb 100644
> --- a/arch/arm/mach-imx/mach-mx25_3ds.c
> +++ b/arch/arm/mach-imx/mach-mx25_3ds.c
> @@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
>  
>  static void __init mx25pdk_init(void)
>  {
> +	imx25_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
>  			ARRAY_SIZE(mx25pdk_pads));
>  
> diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
> index 6e1accf..117ce0a 100644
> --- a/arch/arm/mach-imx/mach-mx27_3ds.c
> +++ b/arch/arm/mach-imx/mach-mx27_3ds.c
> @@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
>  
>  static void __init mx27pdk_init(void)
>  {
> +	imx27_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
>  		"mx27pdk");
>  	mx27_3ds_sdhc1_enable_level_translator();
> diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
> index 1db7950..fc26ed7 100644
> --- a/arch/arm/mach-imx/mach-mx27ads.c
> +++ b/arch/arm/mach-imx/mach-mx27ads.c
> @@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
>  
>  static void __init mx27ads_board_init(void)
>  {
> +	imx27_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
>  			"mx27ads");
>  
> diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
> index 9b98244..ab2a626 100644
> --- a/arch/arm/mach-imx/mach-mx31_3ds.c
> +++ b/arch/arm/mach-imx/mach-mx31_3ds.c
> @@ -689,6 +689,8 @@ static void __init mx31_3ds_init(void)
>  {
>  	int ret;
>  
> +	imx31_soc_init();
> +
>  	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
>  				      "mx31_3ds");
>  
> diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
> index f4dee02..0ce4947 100644
> --- a/arch/arm/mach-imx/mach-mx31ads.c
> +++ b/arch/arm/mach-imx/mach-mx31ads.c
> @@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void)
>  
>  static void __init mx31ads_init(void)
>  {
> +	imx31_soc_init();
> +
>  	mxc_init_extuart();
>  	mxc_init_imx_uart();
>  	mxc_init_i2c();
> diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
> index 410e676..750368d 100644
> --- a/arch/arm/mach-imx/mach-mx31lilly.c
> +++ b/arch/arm/mach-imx/mach-mx31lilly.c
> @@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
>  
>  static void __init mx31lilly_board_init(void)
>  {
> +	imx31_soc_init();
> +
>  	switch (mx31lilly_baseboard) {
>  	case MX31LILLY_NOBOARD:
>  		break;
> diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
> index ac9b4ca..4b47fd9 100644
> --- a/arch/arm/mach-imx/mach-mx31lite.c
> +++ b/arch/arm/mach-imx/mach-mx31lite.c
> @@ -230,6 +230,8 @@ static void __init mx31lite_init(void)
>  {
>  	int ret;
>  
> +	imx31_soc_init();
> +
>  	switch (mx31lite_baseboard) {
>  	case MX31LITE_NOBOARD:
>  		break;
> diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
> index eaa51e4..a52fd36 100644
> --- a/arch/arm/mach-imx/mach-mx31moboard.c
> +++ b/arch/arm/mach-imx/mach-mx31moboard.c
> @@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
>   */
>  static void __init mx31moboard_init(void)
>  {
> +	imx31_soc_init();
> +
>  	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
>  		"moboard");
>  
> diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
> index 882880a..48b3c6f 100644
> --- a/arch/arm/mach-imx/mach-mx35_3ds.c
> +++ b/arch/arm/mach-imx/mach-mx35_3ds.c
> @@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
>   */
>  static void __init mx35_3ds_init(void)
>  {
> +	imx35_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
>  
>  	imx35_add_fec(NULL);
> diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
> index 2774541..c85876f 100644
> --- a/arch/arm/mach-imx/mach-mxt_td60.c
> +++ b/arch/arm/mach-imx/mach-mxt_td60.c
> @@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
>  
>  static void __init mxt_td60_board_init(void)
>  {
> +	imx27_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
>  			"MXT_TD60");
>  
> diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
> index bbddc5a..71083aa 100644
> --- a/arch/arm/mach-imx/mach-pca100.c
> +++ b/arch/arm/mach-imx/mach-pca100.c
> @@ -357,6 +357,8 @@ static void __init pca100_init(void)
>  {
>  	int ret;
>  
> +	imx27_soc_init();
> +
>  	/* SSI unit */
>  	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
>  				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
> diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
> index 89c213b..f45b7cd 100644
> --- a/arch/arm/mach-imx/mach-pcm037.c
> +++ b/arch/arm/mach-imx/mach-pcm037.c
> @@ -576,6 +576,8 @@ static void __init pcm037_init(void)
>  {
>  	int ret;
>  
> +	imx31_soc_init();
> +
>  	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
>  
>  	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
> diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
> index 853bb87..2d6a64b 100644
> --- a/arch/arm/mach-imx/mach-pcm038.c
> +++ b/arch/arm/mach-imx/mach-pcm038.c
> @@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
>  
>  static void __init pcm038_init(void)
>  {
> +	imx27_soc_init();
> +
>  	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
>  			"PCM038");
>  
> diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
> index 0264416..163cc31 100644
> --- a/arch/arm/mach-imx/mach-pcm043.c
> +++ b/arch/arm/mach-imx/mach-pcm043.c
> @@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = {
>   */
>  static void __init pcm043_init(void)
>  {
> +	imx35_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
>  
>  	mxc_audmux_v2_configure_port(3,
> diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
> index c163287..3626f48 100644
> --- a/arch/arm/mach-imx/mach-qong.c
> +++ b/arch/arm/mach-imx/mach-qong.c
> @@ -244,6 +244,8 @@ static void __init qong_init_fpga(void)
>   */
>  static void __init qong_init(void)
>  {
> +	imx31_soc_init();
> +
>  	mxc_init_imx_uart();
>  	qong_init_nor_mtd();
>  	qong_init_fpga();
> diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
> index dcaee04..8280526 100644
> --- a/arch/arm/mach-imx/mach-scb9328.c
> +++ b/arch/arm/mach-imx/mach-scb9328.c
> @@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = {
>   */
>  static void __init scb9328_init(void)
>  {
> +	imx1_soc_init();
> +
>  	imx1_add_imx_uart0(&uart_pdata);
>  
>  	printk(KERN_INFO"Scb9328: Adding devices\n");
> diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
> index d74e347..7d8e012 100644
> --- a/arch/arm/mach-imx/mach-vpr200.c
> +++ b/arch/arm/mach-imx/mach-vpr200.c
> @@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = {
>   */
>  static void __init vpr200_board_init(void)
>  {
> +	imx35_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
>  
>  	imx35_add_fec(NULL);
> diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
> index 2e482ba..b486595 100644
> --- a/arch/arm/mach-imx/mm-imx1.c
> +++ b/arch/arm/mach-imx/mm-imx1.c
> @@ -23,7 +23,6 @@
>  
>  #include <mach/common.h>
>  #include <mach/hardware.h>
> -#include <mach/gpio.h>
>  #include <mach/irqs.h>
>  #include <mach/iomux-v1.h>
>  
> @@ -44,15 +43,15 @@ void __init imx1_init_early(void)
>  			MX1_NUM_GPIO_PORT);
>  }
>  
> -static struct mxc_gpio_port imx1_gpio_ports[] = {
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
> -};
> -
>  void __init mx1_init_irq(void)
>  {
>  	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
> -	mxc_gpio_init(imx1_gpio_ports,	ARRAY_SIZE(imx1_gpio_ports));
> +}
> +
> +void __init imx1_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTA, 0);
> +	mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTB, 0);
> +	mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTC, 0);
> +	mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTD, 0);
>  }
> diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
> index 7a0c500..f0fb8bc 100644
> --- a/arch/arm/mach-imx/mm-imx21.c
> +++ b/arch/arm/mach-imx/mm-imx21.c
> @@ -24,7 +24,6 @@
>  #include <mach/common.h>
>  #include <asm/pgtable.h>
>  #include <asm/mach/map.h>
> -#include <mach/gpio.h>
>  #include <mach/irqs.h>
>  #include <mach/iomux-v1.h>
>  
> @@ -70,17 +69,17 @@ void __init imx21_init_early(void)
>  			MX21_NUM_GPIO_PORT);
>  }
>  
> -static struct mxc_gpio_port imx21_gpio_ports[] = {
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
> -	DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
> -	DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
> -	DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
> -	DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
> -	DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
> -};
> -
>  void __init mx21_init_irq(void)
>  {
>  	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
> -	mxc_gpio_init(imx21_gpio_ports,	ARRAY_SIZE(imx21_gpio_ports));
> +}
> +
> +void __init imx21_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
> +	mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
> +	mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
> +	mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
> +	mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
> +	mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
>  }
> diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
> index 02f7b5c..1b6d583 100644
> --- a/arch/arm/mach-imx/mm-imx25.c
> +++ b/arch/arm/mach-imx/mm-imx25.c
> @@ -27,7 +27,6 @@
>  #include <mach/hardware.h>
>  #include <mach/mx25.h>
>  #include <mach/iomux-v3.h>
> -#include <mach/gpio.h>
>  #include <mach/irqs.h>
>  
>  /*
> @@ -57,16 +56,15 @@ void __init imx25_init_early(void)
>  	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
>  }
>  
> -static struct mxc_gpio_port imx25_gpio_ports[] = {
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
> -};
> -
>  void __init mx25_init_irq(void)
>  {
>  	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
> -	mxc_gpio_init(imx25_gpio_ports,	ARRAY_SIZE(imx25_gpio_ports));
>  }
>  
> +void __init imx25_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
> +	mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
> +	mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
> +	mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
> +}
> diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
> index a6761a3..d3700ce 100644
> --- a/arch/arm/mach-imx/mm-imx27.c
> +++ b/arch/arm/mach-imx/mm-imx27.c
> @@ -24,7 +24,6 @@
>  #include <mach/common.h>
>  #include <asm/pgtable.h>
>  #include <asm/mach/map.h>
> -#include <mach/gpio.h>
>  #include <mach/irqs.h>
>  #include <mach/iomux-v1.h>
>  
> @@ -70,17 +69,17 @@ void __init imx27_init_early(void)
>  			MX27_NUM_GPIO_PORT);
>  }
>  
> -static struct mxc_gpio_port imx27_gpio_ports[] = {
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
> -	DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
> -	DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
> -	DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
> -	DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
> -	DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
> -};
> -
>  void __init mx27_init_irq(void)
>  {
>  	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
> -	mxc_gpio_init(imx27_gpio_ports,	ARRAY_SIZE(imx27_gpio_ports));
> +}
> +
> +void __init imx27_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
> +	mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
> +	mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
> +	mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
> +	mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
> +	mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
>  }
> diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
> index 86b9b45..cb16ac6 100644
> --- a/arch/arm/mach-imx/mm-imx31.c
> +++ b/arch/arm/mach-imx/mm-imx31.c
> @@ -26,7 +26,6 @@
>  #include <mach/common.h>
>  #include <mach/hardware.h>
>  #include <mach/iomux-v3.h>
> -#include <mach/gpio.h>
>  #include <mach/irqs.h>
>  
>  static struct map_desc mx31_io_desc[] __initdata = {
> @@ -53,14 +52,14 @@ void __init imx31_init_early(void)
>  	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
>  }
>  
> -static struct mxc_gpio_port imx31_gpio_ports[] = {
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
> -};
> -
>  void __init mx31_init_irq(void)
>  {
>  	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
> -	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
> +}
> +
> +void __init imx31_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
> +	mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
> +	mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
>  }
> diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
> index c880e6d..648bfca 100644
> --- a/arch/arm/mach-imx/mm-imx35.c
> +++ b/arch/arm/mach-imx/mm-imx35.c
> @@ -27,7 +27,6 @@
>  #include <mach/common.h>
>  #include <mach/hardware.h>
>  #include <mach/iomux-v3.h>
> -#include <mach/gpio.h>
>  #include <mach/irqs.h>
>  
>  static struct map_desc mx35_io_desc[] __initdata = {
> @@ -50,14 +49,14 @@ void __init imx35_init_early(void)
>  	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
>  }
>  
> -static struct mxc_gpio_port imx35_gpio_ports[] = {
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
> -	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
> -};
> -
>  void __init mx35_init_irq(void)
>  {
>  	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
> -	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
> +}
> +
> +void __init imx35_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
> +	mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
> +	mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
>  }
> diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
> index 4efa02e..add0d42 100644
> --- a/arch/arm/mach-mx5/board-cpuimx51.c
> +++ b/arch/arm/mach-mx5/board-cpuimx51.c
> @@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode);
>   */
>  static void __init eukrea_cpuimx51_init(void)
>  {
> +	imx51_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
>  					ARRAY_SIZE(eukrea_cpuimx51_pads));
>  
> diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
> index 5ef25a5..ff096d5 100644
> --- a/arch/arm/mach-mx5/board-cpuimx51sd.c
> +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
> @@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = {
>  
>  static void __init eukrea_cpuimx51sd_init(void)
>  {
> +	imx51_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
>  					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
>  
> diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
> index 11210e1..7de25c6 100644
> --- a/arch/arm/mach-mx5/board-mx50_rdp.c
> +++ b/arch/arm/mach-mx5/board-mx50_rdp.c
> @@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = {
>   */
>  static void __init mx50_rdp_board_init(void)
>  {
> +	imx50_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
>  					ARRAY_SIZE(mx50_rdp_pads));
>  
> diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
> index 63dfbea..3112d15 100644
> --- a/arch/arm/mach-mx5/board-mx51_3ds.c
> +++ b/arch/arm/mach-mx5/board-mx51_3ds.c
> @@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = {
>   */
>  static void __init mx51_3ds_init(void)
>  {
> +	imx51_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
>  					ARRAY_SIZE(mx51_3ds_pads));
>  
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index c7b3fab..6021dd0 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void)
>  	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
>  		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
>  
> +	imx51_soc_init();
> +
>  #if defined(CONFIG_CPU_FREQ_IMX)
>  	get_cpu_op = mx51_get_cpu_op;
>  #endif
> diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
> index 6e36231..3be603b 100644
> --- a/arch/arm/mach-mx5/board-mx51_efikamx.c
> +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
> @@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init);
>  
>  static void __init mx51_efikamx_init(void)
>  {
> +	imx51_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
>  					ARRAY_SIZE(mx51efikamx_pads));
>  	efika_board_common_init();
> diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
> index 474fc6e..4b2e522 100644
> --- a/arch/arm/mach-mx5/board-mx51_efikasb.c
> +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
> @@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void)
>  
>  static void __init efikasb_board_init(void)
>  {
> +	imx51_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
>  					ARRAY_SIZE(mx51efikasb_pads));
>  	efika_board_common_init();
> diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
> index f87d571..0d9218a 100644
> --- a/arch/arm/mach-mx5/board-mx53_evk.c
> +++ b/arch/arm/mach-mx5/board-mx53_evk.c
> @@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = {
>  
>  static void __init mx53_evk_board_init(void)
>  {
> +	imx53_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
>  					ARRAY_SIZE(mx53_evk_pads));
>  	mx53_evk_init_uart();
> diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
> index 1b947e8..359c3e2 100644
> --- a/arch/arm/mach-mx5/board-mx53_loco.c
> +++ b/arch/arm/mach-mx5/board-mx53_loco.c
> @@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
>  
>  static void __init mx53_loco_board_init(void)
>  {
> +	imx53_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
>  					ARRAY_SIZE(mx53_loco_pads));
>  	imx53_add_imx_uart(0, NULL);
> diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
> index 817c089..bc02894 100644
> --- a/arch/arm/mach-mx5/board-mx53_smd.c
> +++ b/arch/arm/mach-mx5/board-mx53_smd.c
> @@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
>  
>  static void __init mx53_smd_board_init(void)
>  {
> +	imx53_soc_init();
> +
>  	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
>  					ARRAY_SIZE(mx53_smd_pads));
>  	mx53_smd_init_uart();
> diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
> index 153ada5..371ca8c 100644
> --- a/arch/arm/mach-mx5/devices.c
> +++ b/arch/arm/mach-mx5/devices.c
> @@ -12,7 +12,6 @@
>  
>  #include <linux/platform_device.h>
>  #include <linux/dma-mapping.h>
> -#include <linux/gpio.h>
>  #include <mach/hardware.h>
>  #include <mach/imx-uart.h>
>  #include <mach/irqs.h>
> @@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = {
>  		.coherent_dma_mask = DMA_BIT_MASK(32),
>  	},
>  };
> -
> -static struct mxc_gpio_port mxc_gpio_ports[] = {
> -	{
> -		.chip.label = "gpio-0",
> -		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
> -		.irq = MX51_MXC_INT_GPIO1_LOW,
> -		.irq_high = MX51_MXC_INT_GPIO1_HIGH,
> -		.virtual_irq_start = MXC_GPIO_IRQ_START
> -	},
> -	{
> -		.chip.label = "gpio-1",
> -		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
> -		.irq = MX51_MXC_INT_GPIO2_LOW,
> -		.irq_high = MX51_MXC_INT_GPIO2_HIGH,
> -		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
> -	},
> -	{
> -		.chip.label = "gpio-2",
> -		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
> -		.irq = MX51_MXC_INT_GPIO3_LOW,
> -		.irq_high = MX51_MXC_INT_GPIO3_HIGH,
> -		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
> -	},
> -	{
> -		.chip.label = "gpio-3",
> -		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
> -		.irq = MX51_MXC_INT_GPIO4_LOW,
> -		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
> -		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
> -	},
> -	{
> -		.chip.label = "gpio-4",
> -		.base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
> -		.irq = MX53_INT_GPIO5_LOW,
> -		.irq_high = MX53_INT_GPIO5_HIGH,
> -		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
> -	},
> -	{
> -		.chip.label = "gpio-5",
> -		.base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
> -		.irq = MX53_INT_GPIO6_LOW,
> -		.irq_high = MX53_INT_GPIO6_HIGH,
> -		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
> -	},
> -	{
> -		.chip.label = "gpio-6",
> -		.base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
> -		.irq = MX53_INT_GPIO7_LOW,
> -		.irq_high = MX53_INT_GPIO7_HIGH,
> -		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
> -	},
> -};
> -
> -int __init imx51_register_gpios(void)
> -{
> -	return mxc_gpio_init(mxc_gpio_ports, 4);
> -}
> -
> -int __init imx53_register_gpios(void)
> -{
> -	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
> -}
> -
> diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
> index b9c363b..28c3f60 100644
> --- a/arch/arm/mach-mx5/mm-mx50.c
> +++ b/arch/arm/mach-mx5/mm-mx50.c
> @@ -26,7 +26,6 @@
>  #include <mach/hardware.h>
>  #include <mach/common.h>
>  #include <mach/iomux-v3.h>
> -#include <mach/gpio.h>
>  #include <mach/irqs.h>
>  
>  /*
> @@ -56,17 +55,17 @@ void __init imx50_init_early(void)
>  	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
>  }
>  
> -static struct mxc_gpio_port imx50_gpio_ports[] = {
> -	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
> -	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
> -	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
> -	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
> -	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
> -	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
> -};
> -
>  void __init mx50_init_irq(void)
>  {
>  	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
> -	mxc_gpio_init(imx50_gpio_ports,	ARRAY_SIZE(imx50_gpio_ports));
> +}
> +
> +void __init imx50_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
> +	mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
> +	mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
> +	mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
> +	mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
> +	mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
>  }
> diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
> index ff55730..800bb8b2 100644
> --- a/arch/arm/mach-mx5/mm.c
> +++ b/arch/arm/mach-mx5/mm.c
> @@ -69,8 +69,6 @@ void __init imx53_init_early(void)
>  	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
>  }
>  
> -int imx51_register_gpios(void);
> -
>  void __init mx51_init_irq(void)
>  {
>  	unsigned long tzic_addr;
> @@ -86,11 +84,8 @@ void __init mx51_init_irq(void)
>  		panic("unable to map TZIC interrupt controller\n");
>  
>  	tzic_init_irq(tzic_virt);
> -	imx51_register_gpios();
>  }
>  
> -int imx53_register_gpios(void);
> -
>  void __init mx53_init_irq(void)
>  {
>  	unsigned long tzic_addr;
> @@ -103,5 +98,23 @@ void __init mx53_init_irq(void)
>  		panic("unable to map TZIC interrupt controller\n");
>  
>  	tzic_init_irq(tzic_virt);
> -	imx53_register_gpios();
> +}
> +
> +void __init imx51_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
> +	mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
> +	mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
> +	mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
> +}
> +
> +void __init imx53_soc_init(void)
> +{
> +	mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
> +	mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
> +	mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
> +	mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
> +	mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
> +	mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
> +	mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
>  }
> diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
> index eee1b60..fb166b2 100644
> --- a/arch/arm/plat-mxc/devices.c
> +++ b/arch/arm/plat-mxc/devices.c
> @@ -89,3 +89,14 @@ err:
>  
>  	return pdev;
>  }
> +
> +struct device mxc_aips_bus = {
> +	.init_name	= "mxc_aips",
> +	.parent		= &platform_bus,
> +};
> +
> +static int __init mxc_device_init(void)
> +{
> +	return device_register(&mxc_aips_bus);
> +}
> +core_initcall(mxc_device_init);
> diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
> index ad2922a..b41bf97 100644
> --- a/arch/arm/plat-mxc/devices/Makefile
> +++ b/arch/arm/plat-mxc/devices/Makefile
> @@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
> +obj-y += platform-gpio-mxc.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
> diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
> new file mode 100644
> index 0000000..cf1b7fd
> --- /dev/null
> +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + * Copyright 2011 Linaro Limited
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +#include <mach/devices-common.h>
> +
> +struct platform_device *__init mxc_register_gpio(int id,
> +	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
> +{
> +	struct resource res[] = {
> +		{
> +			.start = iobase,
> +			.end = iobase + iosize - 1,
> +			.flags = IORESOURCE_MEM,
> +		}, {
> +			.start = irq,
> +			.end = irq,
> +			.flags = IORESOURCE_IRQ,
> +		}, {
> +			.start = irq_high,
> +			.end = irq_high,
> +			.flags = IORESOURCE_IRQ,
> +		},
> +	};
> +
> +	return platform_device_register_resndata(&mxc_aips_bus,
> +			"gpio-mxc", id, res, ARRAY_SIZE(res), NULL, 0);
> +}
> diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
> index da79918..91fa263 100644
> --- a/arch/arm/plat-mxc/include/mach/common.h
> +++ b/arch/arm/plat-mxc/include/mach/common.h
> @@ -43,6 +43,15 @@ extern void mx35_init_irq(void);
>  extern void mx50_init_irq(void);
>  extern void mx51_init_irq(void);
>  extern void mx53_init_irq(void);
> +extern void imx1_soc_init(void);
> +extern void imx21_soc_init(void);
> +extern void imx25_soc_init(void);
> +extern void imx27_soc_init(void);
> +extern void imx31_soc_init(void);
> +extern void imx35_soc_init(void);
> +extern void imx50_soc_init(void);
> +extern void imx51_soc_init(void);
> +extern void imx53_soc_init(void);
>  extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
>  extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
>  extern int mx1_clocks_init(unsigned long fref);
> @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
>  			unsigned long ckih1, unsigned long ckih2);
>  extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
>  			unsigned long ckih1, unsigned long ckih2);
> -extern int mxc_register_gpios(void);
> +extern struct platform_device *mxc_register_gpio(int id,
> +	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
>  extern int mxc_register_device(struct platform_device *pdev, void *data);
>  extern void mxc_set_cpu_type(unsigned int type);
>  extern void mxc_arch_reset_init(void __iomem *);
> diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
> index fa84773..03f6266 100644
> --- a/arch/arm/plat-mxc/include/mach/devices-common.h
> +++ b/arch/arm/plat-mxc/include/mach/devices-common.h
> @@ -10,6 +10,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/init.h>
>  
> +extern struct device mxc_aips_bus;
> +
>  struct platform_device *imx_add_platform_device_dmamask(
>  		const char *name, int id,
>  		const struct resource *res, unsigned int num_resources,
> diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
> index a2747f1..31c820c 100644
> --- a/arch/arm/plat-mxc/include/mach/gpio.h
> +++ b/arch/arm/plat-mxc/include/mach/gpio.h
> @@ -36,31 +36,4 @@
>  #define gpio_to_irq(gpio)	(MXC_GPIO_IRQ_START + (gpio))
>  #define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
>  
> -struct mxc_gpio_port {
> -	void __iomem *base;
> -	int irq;
> -	int irq_high;
> -	int virtual_irq_start;
> -	struct gpio_chip chip;
> -	u32 both_edges;
> -	spinlock_t lock;
> -};
> -
> -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high)	\
> -	{								\
> -		.chip.label = "gpio-" #_id,				\
> -		.irq = _irq,						\
> -		.irq_high = _irq_high,					\
> -		.base = soc ## _IO_ADDRESS(				\
> -				soc ## _GPIO ## _hwid ## _BASE_ADDR),	\
> -		.virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32,	\
> -	}
> -
> -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq)			\
> -	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
> -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid)				\
> -	DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
> -
> -int mxc_gpio_init(struct mxc_gpio_port*, int);
> -
>  #endif
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 6cd6d7f..844079a 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -24,11 +24,28 @@
>  #include <linux/io.h>
>  #include <linux/irq.h>
>  #include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
>  #include <mach/hardware.h>
>  #include <asm-generic/bug.h>
>  
> -static struct mxc_gpio_port *mxc_gpio_ports;
> -static int gpio_table_size;
> +struct mxc_gpio_port {
> +	struct list_head node;
> +	void __iomem *base;
> +	int irq;
> +	int irq_high;
> +	int virtual_irq_start;
> +	struct gpio_chip chip;
> +	u32 both_edges;
> +	spinlock_t lock;
> +};
> +
> +/*
> + * MX2 has one interrupt *for all* gpio ports. The list is used
> + * to save the references to all ports, so that mx2_gpio_irq_handler
> + * can walk through all interrupt status registers.
> + */
> +static LIST_HEAD(mxc_gpio_ports);
>  
>  #define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())
>  
> @@ -50,7 +67,7 @@ static int gpio_table_size;
>  
>  static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
>  {
> -	__raw_writel(1 << index, port->base + GPIO_ISR);
> +	writel(1 << index, port->base + GPIO_ISR);
>  }
>  
>  static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
> @@ -58,27 +75,30 @@ static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
>  {
>  	u32 l;
>  
> -	l = __raw_readl(port->base + GPIO_IMR);
> +	l = readl(port->base + GPIO_IMR);
>  	l = (l & (~(1 << index))) | (!!enable << index);
> -	__raw_writel(l, port->base + GPIO_IMR);
> +	writel(l, port->base + GPIO_IMR);
>  }
>  
>  static void gpio_ack_irq(struct irq_data *d)
>  {
> +	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
>  	u32 gpio = irq_to_gpio(d->irq);
> -	_clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
> +	_clear_gpio_irqstatus(port, gpio & 0x1f);
>  }
>  
>  static void gpio_mask_irq(struct irq_data *d)
>  {
> +	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
>  	u32 gpio = irq_to_gpio(d->irq);
> -	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
> +	_set_gpio_irqenable(port, gpio & 0x1f, 0);
>  }
>  
>  static void gpio_unmask_irq(struct irq_data *d)
>  {
> +	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
>  	u32 gpio = irq_to_gpio(d->irq);
> -	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
> +	_set_gpio_irqenable(port, gpio & 0x1f, 1);
>  }
>  
>  static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
> @@ -86,7 +106,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
>  static int gpio_set_irq_type(struct irq_data *d, u32 type)
>  {
>  	u32 gpio = irq_to_gpio(d->irq);
> -	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
> +	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
>  	u32 bit, val;
>  	int edge;
>  	void __iomem *reg = port->base;
> @@ -122,8 +142,8 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
>  
>  	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
>  	bit = gpio & 0xf;
> -	val = __raw_readl(reg) & ~(0x3 << (bit << 1));
> -	__raw_writel(val | (edge << (bit << 1)), reg);
> +	val = readl(reg) & ~(0x3 << (bit << 1));
> +	writel(val | (edge << (bit << 1)), reg);
>  	_clear_gpio_irqstatus(port, gpio & 0x1f);
>  
>  	return 0;
> @@ -137,7 +157,7 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
>  
>  	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
>  	bit = gpio & 0xf;
> -	val = __raw_readl(reg);
> +	val = readl(reg);
>  	edge = (val >> (bit << 1)) & 3;
>  	val &= ~(0x3 << (bit << 1));
>  	if (edge == GPIO_INT_HIGH_LEV) {
> @@ -151,7 +171,7 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
>  		       gpio, edge);
>  		return;
>  	}
> -	__raw_writel(val | (edge << (bit << 1)), reg);
> +	writel(val | (edge << (bit << 1)), reg);
>  }
>  
>  /* handle 32 interrupts in one status register */
> @@ -177,8 +197,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
>  	u32 irq_stat;
>  	struct mxc_gpio_port *port = irq_get_handler_data(irq);
>  
> -	irq_stat = __raw_readl(port->base + GPIO_ISR) &
> -			__raw_readl(port->base + GPIO_IMR);
> +	irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
>  
>  	mxc_gpio_irq_handler(port, irq_stat);
>  }
> @@ -186,19 +205,18 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
>  /* MX2 has one interrupt *for all* gpio ports */
>  static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
>  {
> -	int i;
>  	u32 irq_msk, irq_stat;
> -	struct mxc_gpio_port *port = irq_get_handler_data(irq);
> +	struct mxc_gpio_port *port;
>  
>  	/* walk through all interrupt status registers */
> -	for (i = 0; i < gpio_table_size; i++) {
> -		irq_msk = __raw_readl(port[i].base + GPIO_IMR);
> +	list_for_each_entry(port, &mxc_gpio_ports, node) {
> +		irq_msk = readl(port->base + GPIO_IMR);
>  		if (!irq_msk)
>  			continue;
>  
> -		irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
> +		irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
>  		if (irq_stat)
> -			mxc_gpio_irq_handler(&port[i], irq_stat);
> +			mxc_gpio_irq_handler(port, irq_stat);
>  	}
>  }
>  
> @@ -215,7 +233,7 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
>  {
>  	u32 gpio = irq_to_gpio(d->irq);
>  	u32 gpio_idx = gpio & 0x1F;
> -	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
> +	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
>  
>  	if (enable) {
>  		if (port->irq_high && (gpio_idx >= 16))
> @@ -250,12 +268,12 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
>  	unsigned long flags;
>  
>  	spin_lock_irqsave(&port->lock, flags);
> -	l = __raw_readl(port->base + GPIO_GDIR);
> +	l = readl(port->base + GPIO_GDIR);
>  	if (dir)
>  		l |= 1 << offset;
>  	else
>  		l &= ~(1 << offset);
> -	__raw_writel(l, port->base + GPIO_GDIR);
> +	writel(l, port->base + GPIO_GDIR);
>  	spin_unlock_irqrestore(&port->lock, flags);
>  }
>  
> @@ -268,8 +286,8 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
>  	unsigned long flags;
>  
>  	spin_lock_irqsave(&port->lock, flags);
> -	l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
> -	__raw_writel(l, reg);
> +	l = (readl(reg) & (~(1 << offset))) | (!!value << offset);
> +	writel(l, reg);
>  	spin_unlock_irqrestore(&port->lock, flags);
>  }
>  
> @@ -278,7 +296,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
>  	struct mxc_gpio_port *port =
>  		container_of(chip, struct mxc_gpio_port, chip);
>  
> -	return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
> +	return (readl(port->base + GPIO_PSR) >> offset) & 1;
>  }
>  
>  static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> @@ -301,61 +319,116 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
>   */
>  static struct lock_class_key gpio_lock_class;
>  
> -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
> +static int __devinit mxc_gpio_probe(struct platform_device *pdev)
>  {
> -	int i, j;
> -
> -	/* save for local usage */
> -	mxc_gpio_ports = port;
> -	gpio_table_size = cnt;
> -
> -	printk(KERN_INFO "MXC GPIO hardware\n");
> -
> -	for (i = 0; i < cnt; i++) {
> -		/* disable the interrupt and clear the status */
> -		__raw_writel(0, port[i].base + GPIO_IMR);
> -		__raw_writel(~0, port[i].base + GPIO_ISR);
> -		for (j = port[i].virtual_irq_start;
> -			j < port[i].virtual_irq_start + 32; j++) {
> -			irq_set_lockdep_class(j, &gpio_lock_class);
> -			irq_set_chip_and_handler(j, &gpio_irq_chip,
> -						 handle_level_irq);
> -			set_irq_flags(j, IRQF_VALID);
> -		}
> +	struct mxc_gpio_port *port;
> +	struct resource *iores;
> +	int err, i;
> +
> +	port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
> +	if (!port)
> +		return -ENOMEM;
>  
> -		/* register gpio chip */
> -		port[i].chip.direction_input = mxc_gpio_direction_input;
> -		port[i].chip.direction_output = mxc_gpio_direction_output;
> -		port[i].chip.get = mxc_gpio_get;
> -		port[i].chip.set = mxc_gpio_set;
> -		port[i].chip.base = i * 32;
> -		port[i].chip.ngpio = 32;
> +	port->virtual_irq_start = MXC_GPIO_IRQ_START + pdev->id * 32;
>  
> -		spin_lock_init(&port[i].lock);
> +	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!iores) {
> +		err = -ENODEV;
> +		goto out_kfree;
> +	}
>  
> -		/* its a serious configuration bug when it fails */
> -		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
> +	if (!request_mem_region(iores->start, resource_size(iores),
> +				pdev->name)) {
> +		err = -EBUSY;
> +		goto out_kfree;
> +	}
>  
> -		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
> -			/* setup one handler for each entry */
> -			irq_set_chained_handler(port[i].irq,
> -						mx3_gpio_irq_handler);
> -			irq_set_handler_data(port[i].irq, &port[i]);
> -			if (port[i].irq_high) {
> -				/* setup handler for GPIO 16 to 31 */
> -				irq_set_chained_handler(port[i].irq_high,
> -							mx3_gpio_irq_handler);
> -				irq_set_handler_data(port[i].irq_high,
> -						     &port[i]);
> -			}
> -		}
> +	port->base = ioremap(iores->start, resource_size(iores));
> +	if (!port->base) {
> +		err = -ENOMEM;
> +		goto out_release_mem;
> +	}
> +
> +	port->irq_high = platform_get_irq(pdev, 1);
> +	port->irq = platform_get_irq(pdev, 0);
> +	if (port->irq < 0) {
> +		err = -EINVAL;
> +		goto out_iounmap;
> +	}
> +
> +	/* disable the interrupt and clear the status */
> +	writel(0, port->base + GPIO_IMR);
> +	writel(~0, port->base + GPIO_ISR);
> +
> +	for (i = port->virtual_irq_start;
> +		i < port->virtual_irq_start + 32; i++) {
> +		irq_set_lockdep_class(i, &gpio_lock_class);
> +		irq_set_chip_and_handler(i, &gpio_irq_chip, handle_level_irq);
> +		set_irq_flags(i, IRQF_VALID);
> +		irq_set_chip_data(i, port);
>  	}
>  
>  	if (cpu_is_mx2()) {
>  		/* setup one handler for all GPIO interrupts */
> -		irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler);
> -		irq_set_handler_data(port[0].irq, port);
> +		if (pdev->id == 0)
> +			irq_set_chained_handler(port->irq,
> +						mx2_gpio_irq_handler);
> +	} else {
> +		/* setup one handler for each entry */
> +		irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
> +		irq_set_handler_data(port->irq, port);
> +		if (port->irq_high > 0) {
> +			/* setup handler for GPIO 16 to 31 */
> +			irq_set_chained_handler(port->irq_high,
> +						mx3_gpio_irq_handler);
> +			irq_set_handler_data(port->irq_high, port);
> +		}
>  	}
>  
> +	/* register gpio chip */
> +	port->chip.direction_input = mxc_gpio_direction_input;
> +	port->chip.direction_output = mxc_gpio_direction_output;
> +	port->chip.get = mxc_gpio_get;
> +	port->chip.set = mxc_gpio_set;
> +	port->chip.base = pdev->id * 32;
> +	port->chip.ngpio = 32;
> +
> +	spin_lock_init(&port->lock);
> +
> +	err = gpiochip_add(&port->chip);
> +	if (err)
> +		goto out_iounmap;
> +
> +	list_add_tail(&port->node, &mxc_gpio_ports);
> +
>  	return 0;
> +
> +out_iounmap:
> +	iounmap(port->base);
> +out_release_mem:
> +	release_mem_region(iores->start, resource_size(iores));
> +out_kfree:
> +	kfree(port);
> +	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
> +	return err;
>  }
> +
> +static struct platform_driver mxc_gpio_driver = {
> +	.driver		= {
> +		.name	= "gpio-mxc",
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= mxc_gpio_probe,
> +};
> +
> +static int __init gpio_mxc_init(void)
> +{
> +	return platform_driver_register(&mxc_gpio_driver);
> +}
> +postcore_initcall(gpio_mxc_init);
> +
> +MODULE_AUTHOR("Freescale Semiconductor, "
> +	      "Daniel Mack <danielncaiaq.de>, "
> +	      "Juergen Beisert <kernel@pengutronix.de>");
> +MODULE_DESCRIPTION("Freescale MXC GPIO");
> +MODULE_LICENSE("GPL");
> -- 
> 1.7.4.1
>
Sascha Hauer June 6, 2011, 8:12 a.m. UTC | #2
On Mon, Jun 06, 2011 at 01:52:41AM -0600, Grant Likely wrote:
> On Mon, Jun 06, 2011 at 12:07:55AM +0800, Shawn Guo wrote:
> > The patch makes necessary changes on gpio-mxc as below to turn it
> > into an upstanding gpio driver.
> > 
> >  * Add a list to save all mx2 ports references, so that
> >    mx2_gpio_irq_handler can walk through all interrupt status
> >    registers
> > 
> >  * Use readl/writel to replace mach-specific accessors
> >    __raw_readl/__raw_writel
> > 
> >  * Change mxc_gpio_init into mxc_gpio_probe function
> > 
> >  * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to
> >    be public at all, and also make some other cleanup on
> >    plat-mxc/include/mach/gpio.h at the same time
> > 
> > And the patch then migrates mach-imx and mach-mx5 to the updated
> > driver by adding corresponding platform devices.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > Acked-by: Olof Johansson <olof@lixom.net>
> 
> Applied, thanks.

I'm not completely happy with this patch going through your tree. It
does massive changes to arch/arm/mach-*mx*, so expect merge conflicts
here.

Sascha

> 
> g.
> 
> > ---
> >  arch/arm/mach-imx/mach-apf9328.c                |    2 +
> >  arch/arm/mach-imx/mach-armadillo5x0.c           |    2 +
> >  arch/arm/mach-imx/mach-bug.c                    |    2 +
> >  arch/arm/mach-imx/mach-cpuimx27.c               |    2 +
> >  arch/arm/mach-imx/mach-cpuimx35.c               |    2 +
> >  arch/arm/mach-imx/mach-eukrea_cpuimx25.c        |    2 +
> >  arch/arm/mach-imx/mach-imx27_visstrim_m10.c     |    2 +
> >  arch/arm/mach-imx/mach-imx27ipcam.c             |    2 +
> >  arch/arm/mach-imx/mach-imx27lite.c              |    2 +
> >  arch/arm/mach-imx/mach-kzm_arm11_01.c           |    2 +
> >  arch/arm/mach-imx/mach-mx1ads.c                 |    2 +
> >  arch/arm/mach-imx/mach-mx21ads.c                |    2 +
> >  arch/arm/mach-imx/mach-mx25_3ds.c               |    2 +
> >  arch/arm/mach-imx/mach-mx27_3ds.c               |    2 +
> >  arch/arm/mach-imx/mach-mx27ads.c                |    2 +
> >  arch/arm/mach-imx/mach-mx31_3ds.c               |    2 +
> >  arch/arm/mach-imx/mach-mx31ads.c                |    2 +
> >  arch/arm/mach-imx/mach-mx31lilly.c              |    2 +
> >  arch/arm/mach-imx/mach-mx31lite.c               |    2 +
> >  arch/arm/mach-imx/mach-mx31moboard.c            |    2 +
> >  arch/arm/mach-imx/mach-mx35_3ds.c               |    2 +
> >  arch/arm/mach-imx/mach-mxt_td60.c               |    2 +
> >  arch/arm/mach-imx/mach-pca100.c                 |    2 +
> >  arch/arm/mach-imx/mach-pcm037.c                 |    2 +
> >  arch/arm/mach-imx/mach-pcm038.c                 |    2 +
> >  arch/arm/mach-imx/mach-pcm043.c                 |    2 +
> >  arch/arm/mach-imx/mach-qong.c                   |    2 +
> >  arch/arm/mach-imx/mach-scb9328.c                |    2 +
> >  arch/arm/mach-imx/mach-vpr200.c                 |    2 +
> >  arch/arm/mach-imx/mm-imx1.c                     |   17 +-
> >  arch/arm/mach-imx/mm-imx21.c                    |   21 +--
> >  arch/arm/mach-imx/mm-imx25.c                    |   16 +-
> >  arch/arm/mach-imx/mm-imx27.c                    |   21 +--
> >  arch/arm/mach-imx/mm-imx31.c                    |   15 +-
> >  arch/arm/mach-imx/mm-imx35.c                    |   15 +-
> >  arch/arm/mach-mx5/board-cpuimx51.c              |    2 +
> >  arch/arm/mach-mx5/board-cpuimx51sd.c            |    2 +
> >  arch/arm/mach-mx5/board-mx50_rdp.c              |    2 +
> >  arch/arm/mach-mx5/board-mx51_3ds.c              |    2 +
> >  arch/arm/mach-mx5/board-mx51_babbage.c          |    2 +
> >  arch/arm/mach-mx5/board-mx51_efikamx.c          |    2 +
> >  arch/arm/mach-mx5/board-mx51_efikasb.c          |    2 +
> >  arch/arm/mach-mx5/board-mx53_evk.c              |    2 +
> >  arch/arm/mach-mx5/board-mx53_loco.c             |    2 +
> >  arch/arm/mach-mx5/board-mx53_smd.c              |    2 +
> >  arch/arm/mach-mx5/devices.c                     |   64 -------
> >  arch/arm/mach-mx5/mm-mx50.c                     |   21 +--
> >  arch/arm/mach-mx5/mm.c                          |   25 ++-
> >  arch/arm/plat-mxc/devices.c                     |   11 ++
> >  arch/arm/plat-mxc/devices/Makefile              |    1 +
> >  arch/arm/plat-mxc/devices/platform-gpio-mxc.c   |   32 ++++
> >  arch/arm/plat-mxc/include/mach/common.h         |   12 ++-
> >  arch/arm/plat-mxc/include/mach/devices-common.h |    2 +
> >  arch/arm/plat-mxc/include/mach/gpio.h           |   27 ---
> >  drivers/gpio/gpio-mxc.c                         |  217 +++++++++++++++--------
> >  55 files changed, 358 insertions(+), 237 deletions(-)
> >  create mode 100644 arch/arm/plat-mxc/devices/platform-gpio-mxc.c
> >
Grant Likely June 6, 2011, 8:18 a.m. UTC | #3
On Mon, Jun 6, 2011 at 2:12 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Mon, Jun 06, 2011 at 01:52:41AM -0600, Grant Likely wrote:
>> On Mon, Jun 06, 2011 at 12:07:55AM +0800, Shawn Guo wrote:
>> > The patch makes necessary changes on gpio-mxc as below to turn it
>> > into an upstanding gpio driver.
>> >
>> >  * Add a list to save all mx2 ports references, so that
>> >    mx2_gpio_irq_handler can walk through all interrupt status
>> >    registers
>> >
>> >  * Use readl/writel to replace mach-specific accessors
>> >    __raw_readl/__raw_writel
>> >
>> >  * Change mxc_gpio_init into mxc_gpio_probe function
>> >
>> >  * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to
>> >    be public at all, and also make some other cleanup on
>> >    plat-mxc/include/mach/gpio.h at the same time
>> >
>> > And the patch then migrates mach-imx and mach-mx5 to the updated
>> > driver by adding corresponding platform devices.
>> >
>> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
>> > Acked-by: Olof Johansson <olof@lixom.net>
>>
>> Applied, thanks.
>
> I'm not completely happy with this patch going through your tree. It
> does massive changes to arch/arm/mach-*mx*, so expect merge conflicts
> here.

There are also massive changes going on in drivers/gpio.  The solution
here is to probably put these changes into a new dedicated branch
based on Linus' tree, we both agree not to rebase that branch, and
both of us merge the branch into our trees.

g.
Sascha Hauer June 6, 2011, 8:47 a.m. UTC | #4
On Mon, Jun 06, 2011 at 02:18:29AM -0600, Grant Likely wrote:
> On Mon, Jun 6, 2011 at 2:12 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> > On Mon, Jun 06, 2011 at 01:52:41AM -0600, Grant Likely wrote:
> >> On Mon, Jun 06, 2011 at 12:07:55AM +0800, Shawn Guo wrote:
> >> > The patch makes necessary changes on gpio-mxc as below to turn it
> >> > into an upstanding gpio driver.
> >> >
> >> >  * Add a list to save all mx2 ports references, so that
> >> >    mx2_gpio_irq_handler can walk through all interrupt status
> >> >    registers
> >> >
> >> >  * Use readl/writel to replace mach-specific accessors
> >> >    __raw_readl/__raw_writel
> >> >
> >> >  * Change mxc_gpio_init into mxc_gpio_probe function
> >> >
> >> >  * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to
> >> >    be public at all, and also make some other cleanup on
> >> >    plat-mxc/include/mach/gpio.h at the same time
> >> >
> >> > And the patch then migrates mach-imx and mach-mx5 to the updated
> >> > driver by adding corresponding platform devices.
> >> >
> >> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> >> > Acked-by: Olof Johansson <olof@lixom.net>
> >>
> >> Applied, thanks.
> >
> > I'm not completely happy with this patch going through your tree. It
> > does massive changes to arch/arm/mach-*mx*, so expect merge conflicts
> > here.
> 
> There are also massive changes going on in drivers/gpio.  The solution
> here is to probably put these changes into a new dedicated branch
> based on Linus' tree, we both agree not to rebase that branch, and
> both of us merge the branch into our trees.

That can work. I just checked that atm there are no conflicts between my
branch and Shawns patches. Can you set up such a branch? Otherwise I can
just keep an eye on conflicts and we set up such a branch once a real
conflict arises.

Sascha
diff mbox

Patch

diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 15e45c8..59d2a3b 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -115,6 +115,8 @@  static struct platform_device *devices[] __initdata = {
 
 static void __init apf9328_init(void)
 {
+	imx1_soc_init();
+
 	mxc_gpio_setup_multiple_pins(apf9328_pins,
 			ARRAY_SIZE(apf9328_pins),
 			"APF9328");
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ffb40ff..ede2710 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -490,6 +490,8 @@  static struct platform_device *devices[] __initdata = {
  */
 static void __init armadillo5x0_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 42e4f07..f494705 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -42,6 +42,8 @@  static const unsigned int bug_pins[] __initconst = {
 
 static void __init bug_board_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(bug_pins,
 				      ARRAY_SIZE(bug_pins), "uart-4");
 	imx31_add_imx_uart4(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 46a2e41..87887ac 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -250,6 +250,8 @@  __setup("otg_mode=", eukrea_cpuimx27_otg_mode);
 
 static void __init eukrea_cpuimx27_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
 		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
 
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 3f8ef82..f39a478b 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -156,6 +156,8 @@  __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
  */
 static void __init eukrea_cpuimx35_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
 
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 148cff2..da36da5 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -125,6 +125,8 @@  __setup("otg_mode=", eukrea_cpuimx25_otg_mode);
 
 static void __init eukrea_cpuimx25_init(void)
 {
+	imx25_soc_init();
+
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
 			ARRAY_SIZE(eukrea_cpuimx25_pads)))
 		printk(KERN_ERR "error setting cpuimx25 pads !\n");
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 7ae43b1..c6269d6 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -231,6 +231,8 @@  static void __init visstrim_m10_board_init(void)
 {
 	int ret;
 
+	imx27_soc_init();
+
 	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
 			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
 	if (ret)
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 9be6cd6..272f793 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -50,6 +50,8 @@  static const int mx27ipcam_pins[] __initconst = {
 
 static void __init mx27ipcam_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
 		"mx27ipcam");
 
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 8411405..d81a769 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -59,6 +59,8 @@  static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mx27lite_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
 		"imx27lite");
 	imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 1ecae20..e472a1d 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -223,6 +223,8 @@  static int kzm_pins[] __initdata = {
  */
 static void __init kzm_board_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(kzm_pins,
 				      ARRAY_SIZE(kzm_pins), "kzm");
 	kzm_init_ext_uart();
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 38ec5cb..5cd8bee 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -115,6 +115,8 @@  static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+	imx1_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx1ads_pins,
 		ARRAY_SIZE(mx1ads_pins), "mx1ads");
 
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 74ac889..d389ecf 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -279,6 +279,8 @@  static struct platform_device *platform_devices[] __initdata = {
 
 static void __init mx21ads_board_init(void)
 {
+	imx21_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
 			"mx21ads");
 
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 58ea3fd..01534bb 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -219,6 +219,8 @@  static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
 
 static void __init mx25pdk_init(void)
 {
+	imx25_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
 			ARRAY_SIZE(mx25pdk_pads));
 
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6e1accf..117ce0a 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -267,6 +267,8 @@  static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 
 static void __init mx27pdk_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
 	mx27_3ds_sdhc1_enable_level_translator();
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 1db7950..fc26ed7 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -288,6 +288,8 @@  static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mx27ads_board_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
 			"mx27ads");
 
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 9b98244..ab2a626 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -689,6 +689,8 @@  static void __init mx31_3ds_init(void)
 {
 	int ret;
 
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index f4dee02..0ce4947 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -516,6 +516,8 @@  static void __init mx31ads_init_irq(void)
 
 static void __init mx31ads_init(void)
 {
+	imx31_soc_init();
+
 	mxc_init_extuart();
 	mxc_init_imx_uart();
 	mxc_init_i2c();
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 410e676..750368d 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -243,6 +243,8 @@  core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
 
 static void __init mx31lilly_board_init(void)
 {
+	imx31_soc_init();
+
 	switch (mx31lilly_baseboard) {
 	case MX31LILLY_NOBOARD:
 		break;
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index ac9b4ca..4b47fd9 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -230,6 +230,8 @@  static void __init mx31lite_init(void)
 {
 	int ret;
 
+	imx31_soc_init();
+
 	switch (mx31lite_baseboard) {
 	case MX31LITE_NOBOARD:
 		break;
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index eaa51e4..a52fd36 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -507,6 +507,8 @@  core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mx31moboard_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
 		"moboard");
 
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 882880a..48b3c6f 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -179,6 +179,8 @@  static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
  */
 static void __init mx35_3ds_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
 	imx35_add_fec(NULL);
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 2774541..c85876f 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -233,6 +233,8 @@  static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mxt_td60_board_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
 			"MXT_TD60");
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index bbddc5a..71083aa 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -357,6 +357,8 @@  static void __init pca100_init(void)
 {
 	int ret;
 
+	imx27_soc_init();
+
 	/* SSI unit */
 	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
 				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 89c213b..f45b7cd 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -576,6 +576,8 @@  static void __init pcm037_init(void)
 {
 	int ret;
 
+	imx31_soc_init();
+
 	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 853bb87..2d6a64b 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -295,6 +295,8 @@  static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 
 static void __init pcm038_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
 			"PCM038");
 
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 0264416..163cc31 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -356,6 +356,8 @@  static struct esdhc_platform_data sd1_pdata = {
  */
 static void __init pcm043_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
 	mxc_audmux_v2_configure_port(3,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index c163287..3626f48 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -244,6 +244,8 @@  static void __init qong_init_fpga(void)
  */
 static void __init qong_init(void)
 {
+	imx31_soc_init();
+
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
 	qong_init_fpga();
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index dcaee04..8280526 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -129,6 +129,8 @@  static struct platform_device *devices[] __initdata = {
  */
 static void __init scb9328_init(void)
 {
+	imx1_soc_init();
+
 	imx1_add_imx_uart0(&uart_pdata);
 
 	printk(KERN_INFO"Scb9328: Adding devices\n");
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index d74e347..7d8e012 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -267,6 +267,8 @@  static struct platform_device *devices[] __initdata = {
  */
 static void __init vpr200_board_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
 
 	imx35_add_fec(NULL);
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 2e482ba..b486595 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -23,7 +23,6 @@ 
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -44,15 +43,15 @@  void __init imx1_init_early(void)
 			MX1_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx1_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
-};
-
 void __init mx1_init_irq(void)
 {
 	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx1_gpio_ports,	ARRAY_SIZE(imx1_gpio_ports));
+}
+
+void __init imx1_soc_init(void)
+{
+	mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTA, 0);
+	mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTB, 0);
+	mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTC, 0);
+	mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTD, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 7a0c500..f0fb8bc 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -24,7 +24,6 @@ 
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -70,17 +69,17 @@  void __init imx21_init_early(void)
 			MX21_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx21_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
-	DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
-	DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
-	DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
-	DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
-	DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
-};
-
 void __init mx21_init_irq(void)
 {
 	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx21_gpio_ports,	ARRAY_SIZE(imx21_gpio_ports));
+}
+
+void __init imx21_soc_init(void)
+{
+	mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+	mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+	mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+	mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+	mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+	mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 02f7b5c..1b6d583 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -27,7 +27,6 @@ 
 #include <mach/hardware.h>
 #include <mach/mx25.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -57,16 +56,15 @@  void __init imx25_init_early(void)
 	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx25_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
-};
-
 void __init mx25_init_irq(void)
 {
 	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx25_gpio_ports,	ARRAY_SIZE(imx25_gpio_ports));
 }
 
+void __init imx25_soc_init(void)
+{
+	mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
+	mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
+	mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
+	mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index a6761a3..d3700ce 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -24,7 +24,6 @@ 
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -70,17 +69,17 @@  void __init imx27_init_early(void)
 			MX27_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx27_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
-	DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
-	DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
-	DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
-	DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
-	DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
-};
-
 void __init mx27_init_irq(void)
 {
 	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx27_gpio_ports,	ARRAY_SIZE(imx27_gpio_ports));
+}
+
+void __init imx27_soc_init(void)
+{
+	mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+	mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+	mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+	mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+	mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+	mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
index 86b9b45..cb16ac6 100644
--- a/arch/arm/mach-imx/mm-imx31.c
+++ b/arch/arm/mach-imx/mm-imx31.c
@@ -26,7 +26,6 @@ 
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 static struct map_desc mx31_io_desc[] __initdata = {
@@ -53,14 +52,14 @@  void __init imx31_init_early(void)
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx31_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
+}
+
+void __init imx31_soc_init(void)
+{
+	mxc_register_gpio(0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+	mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+	mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
index c880e6d..648bfca 100644
--- a/arch/arm/mach-imx/mm-imx35.c
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -27,7 +27,6 @@ 
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 static struct map_desc mx35_io_desc[] __initdata = {
@@ -50,14 +49,14 @@  void __init imx35_init_early(void)
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx35_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
 void __init mx35_init_irq(void)
 {
 	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
+}
+
+void __init imx35_soc_init(void)
+{
+	mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+	mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+	mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 }
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 4efa02e..add0d42 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -245,6 +245,8 @@  __setup("otg_mode=", eukrea_cpuimx51_otg_mode);
  */
 static void __init eukrea_cpuimx51_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
 					ARRAY_SIZE(eukrea_cpuimx51_pads));
 
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 5ef25a5..ff096d5 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -264,6 +264,8 @@  static struct platform_device *platform_devices[] __initdata = {
 
 static void __init eukrea_cpuimx51sd_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
 					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index 11210e1..7de25c6 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -192,6 +192,8 @@  static const struct imxi2c_platform_data i2c_data __initconst = {
  */
 static void __init mx50_rdp_board_init(void)
 {
+	imx50_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
 					ARRAY_SIZE(mx50_rdp_pads));
 
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 63dfbea..3112d15 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -135,6 +135,8 @@  static struct spi_board_info mx51_3ds_spi_nor_device[] = {
  */
 static void __init mx51_3ds_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
 					ARRAY_SIZE(mx51_3ds_pads));
 
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index c7b3fab..6021dd0 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -340,6 +340,8 @@  static void __init mx51_babbage_init(void)
 	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
 		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
+	imx51_soc_init();
+
 #if defined(CONFIG_CPU_FREQ_IMX)
 	get_cpu_op = mx51_get_cpu_op;
 #endif
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 6e36231..3be603b 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -236,6 +236,8 @@  late_initcall(mx51_efikamx_power_init);
 
 static void __init mx51_efikamx_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
 					ARRAY_SIZE(mx51efikamx_pads));
 	efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 474fc6e..4b2e522 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -248,6 +248,8 @@  static void __init mx51_efikasb_board_id(void)
 
 static void __init efikasb_board_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
 					ARRAY_SIZE(mx51efikasb_pads));
 	efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index f87d571..0d9218a 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -117,6 +117,8 @@  static const struct spi_imx_master mx53_evk_spi_data __initconst = {
 
 static void __init mx53_evk_board_init(void)
 {
+	imx53_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
 					ARRAY_SIZE(mx53_evk_pads));
 	mx53_evk_init_uart();
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 1b947e8..359c3e2 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -227,6 +227,8 @@  static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
 
 static void __init mx53_loco_board_init(void)
 {
+	imx53_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
 					ARRAY_SIZE(mx53_loco_pads));
 	imx53_add_imx_uart(0, NULL);
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 817c089..bc02894 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -113,6 +113,8 @@  static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 
 static void __init mx53_smd_board_init(void)
 {
+	imx53_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
 					ARRAY_SIZE(mx53_smd_pads));
 	mx53_smd_init_uart();
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 153ada5..371ca8c 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -12,7 +12,6 @@ 
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
@@ -119,66 +118,3 @@  struct platform_device mxc_usbh2_device = {
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
-
-static struct mxc_gpio_port mxc_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO1_LOW,
-		.irq_high = MX51_MXC_INT_GPIO1_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START
-	},
-	{
-		.chip.label = "gpio-1",
-		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO2_LOW,
-		.irq_high = MX51_MXC_INT_GPIO2_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
-	},
-	{
-		.chip.label = "gpio-2",
-		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO3_LOW,
-		.irq_high = MX51_MXC_INT_GPIO3_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
-	},
-	{
-		.chip.label = "gpio-3",
-		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO4_LOW,
-		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
-	},
-	{
-		.chip.label = "gpio-4",
-		.base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
-		.irq = MX53_INT_GPIO5_LOW,
-		.irq_high = MX53_INT_GPIO5_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
-	},
-	{
-		.chip.label = "gpio-5",
-		.base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
-		.irq = MX53_INT_GPIO6_LOW,
-		.irq_high = MX53_INT_GPIO6_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
-	},
-	{
-		.chip.label = "gpio-6",
-		.base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
-		.irq = MX53_INT_GPIO7_LOW,
-		.irq_high = MX53_INT_GPIO7_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
-	},
-};
-
-int __init imx51_register_gpios(void)
-{
-	return mxc_gpio_init(mxc_gpio_ports, 4);
-}
-
-int __init imx53_register_gpios(void)
-{
-	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
index b9c363b..28c3f60 100644
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ b/arch/arm/mach-mx5/mm-mx50.c
@@ -26,7 +26,6 @@ 
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -56,17 +55,17 @@  void __init imx50_init_early(void)
 	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx50_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-};
-
 void __init mx50_init_irq(void)
 {
 	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-	mxc_gpio_init(imx50_gpio_ports,	ARRAY_SIZE(imx50_gpio_ports));
+}
+
+void __init imx50_soc_init(void)
+{
+	mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+	mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+	mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+	mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+	mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+	mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
 }
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index ff55730..800bb8b2 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -69,8 +69,6 @@  void __init imx53_init_early(void)
 	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-int imx51_register_gpios(void);
-
 void __init mx51_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -86,11 +84,8 @@  void __init mx51_init_irq(void)
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
-	imx51_register_gpios();
 }
 
-int imx53_register_gpios(void);
-
 void __init mx53_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -103,5 +98,23 @@  void __init mx53_init_irq(void)
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
-	imx53_register_gpios();
+}
+
+void __init imx51_soc_init(void)
+{
+	mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
+	mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
+	mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
+	mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+}
+
+void __init imx53_soc_init(void)
+{
+	mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+	mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+	mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+	mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+	mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+	mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+	mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
 }
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index eee1b60..fb166b2 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -89,3 +89,14 @@  err:
 
 	return pdev;
 }
+
+struct device mxc_aips_bus = {
+	.init_name	= "mxc_aips",
+	.parent		= &platform_bus,
+};
+
+static int __init mxc_device_init(void)
+{
+	return device_register(&mxc_aips_bus);
+}
+core_initcall(mxc_device_init);
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index ad2922a..b41bf97 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -2,6 +2,7 @@  obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-y += platform-gpio-mxc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
new file mode 100644
index 0000000..cf1b7fd
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
@@ -0,0 +1,32 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxc_register_gpio(int id,
+	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irq_high,
+			.end = irq_high,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return platform_device_register_resndata(&mxc_aips_bus,
+			"gpio-mxc", id, res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index da79918..91fa263 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -43,6 +43,15 @@  extern void mx35_init_irq(void);
 extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
+extern void imx1_soc_init(void);
+extern void imx21_soc_init(void);
+extern void imx25_soc_init(void);
+extern void imx27_soc_init(void);
+extern void imx31_soc_init(void);
+extern void imx35_soc_init(void);
+extern void imx50_soc_init(void);
+extern void imx51_soc_init(void);
+extern void imx53_soc_init(void);
 extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -55,7 +64,8 @@  extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mxc_register_gpios(void);
+extern struct platform_device *mxc_register_gpio(int id,
+	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index fa84773..03f6266 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -10,6 +10,8 @@ 
 #include <linux/platform_device.h>
 #include <linux/init.h>
 
+extern struct device mxc_aips_bus;
+
 struct platform_device *imx_add_platform_device_dmamask(
 		const char *name, int id,
 		const struct resource *res, unsigned int num_resources,
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index a2747f1..31c820c 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -36,31 +36,4 @@ 
 #define gpio_to_irq(gpio)	(MXC_GPIO_IRQ_START + (gpio))
 #define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
 
-struct mxc_gpio_port {
-	void __iomem *base;
-	int irq;
-	int irq_high;
-	int virtual_irq_start;
-	struct gpio_chip chip;
-	u32 both_edges;
-	spinlock_t lock;
-};
-
-#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high)	\
-	{								\
-		.chip.label = "gpio-" #_id,				\
-		.irq = _irq,						\
-		.irq_high = _irq_high,					\
-		.base = soc ## _IO_ADDRESS(				\
-				soc ## _GPIO ## _hwid ## _BASE_ADDR),	\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32,	\
-	}
-
-#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq)			\
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
-#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid)				\
-	DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
 #endif
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 6cd6d7f..844079a 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -24,11 +24,28 @@ 
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <mach/hardware.h>
 #include <asm-generic/bug.h>
 
-static struct mxc_gpio_port *mxc_gpio_ports;
-static int gpio_table_size;
+struct mxc_gpio_port {
+	struct list_head node;
+	void __iomem *base;
+	int irq;
+	int irq_high;
+	int virtual_irq_start;
+	struct gpio_chip chip;
+	u32 both_edges;
+	spinlock_t lock;
+};
+
+/*
+ * MX2 has one interrupt *for all* gpio ports. The list is used
+ * to save the references to all ports, so that mx2_gpio_irq_handler
+ * can walk through all interrupt status registers.
+ */
+static LIST_HEAD(mxc_gpio_ports);
 
 #define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())
 
@@ -50,7 +67,7 @@  static int gpio_table_size;
 
 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
 {
-	__raw_writel(1 << index, port->base + GPIO_ISR);
+	writel(1 << index, port->base + GPIO_ISR);
 }
 
 static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
@@ -58,27 +75,30 @@  static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
 {
 	u32 l;
 
-	l = __raw_readl(port->base + GPIO_IMR);
+	l = readl(port->base + GPIO_IMR);
 	l = (l & (~(1 << index))) | (!!enable << index);
-	__raw_writel(l, port->base + GPIO_IMR);
+	writel(l, port->base + GPIO_IMR);
 }
 
 static void gpio_ack_irq(struct irq_data *d)
 {
+	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
 	u32 gpio = irq_to_gpio(d->irq);
-	_clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
+	_clear_gpio_irqstatus(port, gpio & 0x1f);
 }
 
 static void gpio_mask_irq(struct irq_data *d)
 {
+	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
 	u32 gpio = irq_to_gpio(d->irq);
-	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+	_set_gpio_irqenable(port, gpio & 0x1f, 0);
 }
 
 static void gpio_unmask_irq(struct irq_data *d)
 {
+	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
 	u32 gpio = irq_to_gpio(d->irq);
-	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+	_set_gpio_irqenable(port, gpio & 0x1f, 1);
 }
 
 static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
@@ -86,7 +106,7 @@  static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
 static int gpio_set_irq_type(struct irq_data *d, u32 type)
 {
 	u32 gpio = irq_to_gpio(d->irq);
-	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
 	u32 bit, val;
 	int edge;
 	void __iomem *reg = port->base;
@@ -122,8 +142,8 @@  static int gpio_set_irq_type(struct irq_data *d, u32 type)
 
 	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 	bit = gpio & 0xf;
-	val = __raw_readl(reg) & ~(0x3 << (bit << 1));
-	__raw_writel(val | (edge << (bit << 1)), reg);
+	val = readl(reg) & ~(0x3 << (bit << 1));
+	writel(val | (edge << (bit << 1)), reg);
 	_clear_gpio_irqstatus(port, gpio & 0x1f);
 
 	return 0;
@@ -137,7 +157,7 @@  static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 
 	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 	bit = gpio & 0xf;
-	val = __raw_readl(reg);
+	val = readl(reg);
 	edge = (val >> (bit << 1)) & 3;
 	val &= ~(0x3 << (bit << 1));
 	if (edge == GPIO_INT_HIGH_LEV) {
@@ -151,7 +171,7 @@  static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 		       gpio, edge);
 		return;
 	}
-	__raw_writel(val | (edge << (bit << 1)), reg);
+	writel(val | (edge << (bit << 1)), reg);
 }
 
 /* handle 32 interrupts in one status register */
@@ -177,8 +197,7 @@  static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 	u32 irq_stat;
 	struct mxc_gpio_port *port = irq_get_handler_data(irq);
 
-	irq_stat = __raw_readl(port->base + GPIO_ISR) &
-			__raw_readl(port->base + GPIO_IMR);
+	irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
 
 	mxc_gpio_irq_handler(port, irq_stat);
 }
@@ -186,19 +205,18 @@  static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 /* MX2 has one interrupt *for all* gpio ports */
 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
-	int i;
 	u32 irq_msk, irq_stat;
-	struct mxc_gpio_port *port = irq_get_handler_data(irq);
+	struct mxc_gpio_port *port;
 
 	/* walk through all interrupt status registers */
-	for (i = 0; i < gpio_table_size; i++) {
-		irq_msk = __raw_readl(port[i].base + GPIO_IMR);
+	list_for_each_entry(port, &mxc_gpio_ports, node) {
+		irq_msk = readl(port->base + GPIO_IMR);
 		if (!irq_msk)
 			continue;
 
-		irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
+		irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
 		if (irq_stat)
-			mxc_gpio_irq_handler(&port[i], irq_stat);
+			mxc_gpio_irq_handler(port, irq_stat);
 	}
 }
 
@@ -215,7 +233,7 @@  static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 {
 	u32 gpio = irq_to_gpio(d->irq);
 	u32 gpio_idx = gpio & 0x1F;
-	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+	struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
 
 	if (enable) {
 		if (port->irq_high && (gpio_idx >= 16))
@@ -250,12 +268,12 @@  static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
-	l = __raw_readl(port->base + GPIO_GDIR);
+	l = readl(port->base + GPIO_GDIR);
 	if (dir)
 		l |= 1 << offset;
 	else
 		l &= ~(1 << offset);
-	__raw_writel(l, port->base + GPIO_GDIR);
+	writel(l, port->base + GPIO_GDIR);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -268,8 +286,8 @@  static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
-	l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
-	__raw_writel(l, reg);
+	l = (readl(reg) & (~(1 << offset))) | (!!value << offset);
+	writel(l, reg);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -278,7 +296,7 @@  static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
 	struct mxc_gpio_port *port =
 		container_of(chip, struct mxc_gpio_port, chip);
 
-	return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
+	return (readl(port->base + GPIO_PSR) >> offset) & 1;
 }
 
 static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -301,61 +319,116 @@  static int mxc_gpio_direction_output(struct gpio_chip *chip,
  */
 static struct lock_class_key gpio_lock_class;
 
-int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
+static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 {
-	int i, j;
-
-	/* save for local usage */
-	mxc_gpio_ports = port;
-	gpio_table_size = cnt;
-
-	printk(KERN_INFO "MXC GPIO hardware\n");
-
-	for (i = 0; i < cnt; i++) {
-		/* disable the interrupt and clear the status */
-		__raw_writel(0, port[i].base + GPIO_IMR);
-		__raw_writel(~0, port[i].base + GPIO_ISR);
-		for (j = port[i].virtual_irq_start;
-			j < port[i].virtual_irq_start + 32; j++) {
-			irq_set_lockdep_class(j, &gpio_lock_class);
-			irq_set_chip_and_handler(j, &gpio_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(j, IRQF_VALID);
-		}
+	struct mxc_gpio_port *port;
+	struct resource *iores;
+	int err, i;
+
+	port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
 
-		/* register gpio chip */
-		port[i].chip.direction_input = mxc_gpio_direction_input;
-		port[i].chip.direction_output = mxc_gpio_direction_output;
-		port[i].chip.get = mxc_gpio_get;
-		port[i].chip.set = mxc_gpio_set;
-		port[i].chip.base = i * 32;
-		port[i].chip.ngpio = 32;
+	port->virtual_irq_start = MXC_GPIO_IRQ_START + pdev->id * 32;
 
-		spin_lock_init(&port[i].lock);
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iores) {
+		err = -ENODEV;
+		goto out_kfree;
+	}
 
-		/* its a serious configuration bug when it fails */
-		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
+	if (!request_mem_region(iores->start, resource_size(iores),
+				pdev->name)) {
+		err = -EBUSY;
+		goto out_kfree;
+	}
 
-		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
-			/* setup one handler for each entry */
-			irq_set_chained_handler(port[i].irq,
-						mx3_gpio_irq_handler);
-			irq_set_handler_data(port[i].irq, &port[i]);
-			if (port[i].irq_high) {
-				/* setup handler for GPIO 16 to 31 */
-				irq_set_chained_handler(port[i].irq_high,
-							mx3_gpio_irq_handler);
-				irq_set_handler_data(port[i].irq_high,
-						     &port[i]);
-			}
-		}
+	port->base = ioremap(iores->start, resource_size(iores));
+	if (!port->base) {
+		err = -ENOMEM;
+		goto out_release_mem;
+	}
+
+	port->irq_high = platform_get_irq(pdev, 1);
+	port->irq = platform_get_irq(pdev, 0);
+	if (port->irq < 0) {
+		err = -EINVAL;
+		goto out_iounmap;
+	}
+
+	/* disable the interrupt and clear the status */
+	writel(0, port->base + GPIO_IMR);
+	writel(~0, port->base + GPIO_ISR);
+
+	for (i = port->virtual_irq_start;
+		i < port->virtual_irq_start + 32; i++) {
+		irq_set_lockdep_class(i, &gpio_lock_class);
+		irq_set_chip_and_handler(i, &gpio_irq_chip, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+		irq_set_chip_data(i, port);
 	}
 
 	if (cpu_is_mx2()) {
 		/* setup one handler for all GPIO interrupts */
-		irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-		irq_set_handler_data(port[0].irq, port);
+		if (pdev->id == 0)
+			irq_set_chained_handler(port->irq,
+						mx2_gpio_irq_handler);
+	} else {
+		/* setup one handler for each entry */
+		irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
+		irq_set_handler_data(port->irq, port);
+		if (port->irq_high > 0) {
+			/* setup handler for GPIO 16 to 31 */
+			irq_set_chained_handler(port->irq_high,
+						mx3_gpio_irq_handler);
+			irq_set_handler_data(port->irq_high, port);
+		}
 	}
 
+	/* register gpio chip */
+	port->chip.direction_input = mxc_gpio_direction_input;
+	port->chip.direction_output = mxc_gpio_direction_output;
+	port->chip.get = mxc_gpio_get;
+	port->chip.set = mxc_gpio_set;
+	port->chip.base = pdev->id * 32;
+	port->chip.ngpio = 32;
+
+	spin_lock_init(&port->lock);
+
+	err = gpiochip_add(&port->chip);
+	if (err)
+		goto out_iounmap;
+
+	list_add_tail(&port->node, &mxc_gpio_ports);
+
 	return 0;
+
+out_iounmap:
+	iounmap(port->base);
+out_release_mem:
+	release_mem_region(iores->start, resource_size(iores));
+out_kfree:
+	kfree(port);
+	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
+	return err;
 }
+
+static struct platform_driver mxc_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-mxc",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mxc_gpio_probe,
+};
+
+static int __init gpio_mxc_init(void)
+{
+	return platform_driver_register(&mxc_gpio_driver);
+}
+postcore_initcall(gpio_mxc_init);
+
+MODULE_AUTHOR("Freescale Semiconductor, "
+	      "Daniel Mack <danielncaiaq.de>, "
+	      "Juergen Beisert <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale MXC GPIO");
+MODULE_LICENSE("GPL");