Message ID | 20191007101027.8383-2-manivannan.sadhasivam@linaro.org |
---|---|
State | New |
Headers | show |
Series | Add support for ADUX1020 sensor | expand |
Hi Ardelean, On 7 October 2019 3:51:16 PM IST, "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote: >On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote: >> [External] >> >> Add devicetree binding for Analog Devices ADUX1020 Photometric >> sensor. >> > >Hey, > >Thanks for the patches. > >This dt-binding docs is in text format. >dt-binding docs now need to be in YAML format. > Sure. I can convert to YAML binding. >Also, patches for dt-bindings docs usually come after the driver is >added. >So, this patch should be the second in the series, not the first. > I don't think so. The convention is to put dt-bindings patch upfront for all subsystems. Not sure if IIO differs here. Thanks, Mani >Alex > >> Signed-off-by: Manivannan Sadhasivam ><manivannan.sadhasivam@linaro.org> >> --- >> .../bindings/iio/light/adux1020.txt | 22 >+++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/iio/light/adux1020.txt >> >> diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt >> b/Documentation/devicetree/bindings/iio/light/adux1020.txt >> new file mode 100644 >> index 000000000000..e896dda30e36 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt >> @@ -0,0 +1,22 @@ >> +Analog Devices ADUX1020 Photometric sensor >> + >> +Link to datasheet: >> >https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf >> + >> +Required properties: >> + >> + - compatible: should be "adi,adux1020" >> + - reg: the I2C address of the sensor >> + >> +Optional properties: >> + >> + - interrupts: interrupt mapping for IRQ as documented in >> + >Documentation/devicetree/bindings/interrupt-controller/interrupts.txt >> + >> +Example: >> + >> +adux1020@64 { >> + compatible = "adi,adux1020"; >> + reg = <0x64>; >> + interrupt-parent = <&msmgpio>; >> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; >> +}; -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
On Mon, 2019-10-07 at 18:10 +0530, Manivannan Sadhasivam wrote: > [External] > > Hi Ardelean, > > On 7 October 2019 3:51:16 PM IST, "Ardelean, Alexandru" < > alexandru.Ardelean@analog.com> wrote: > > On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote: > > > [External] > > > > > > Add devicetree binding for Analog Devices ADUX1020 Photometric > > > sensor. > > > > > > > Hey, > > > > Thanks for the patches. > > > > This dt-binding docs is in text format. > > dt-binding docs now need to be in YAML format. > > > > Sure. I can convert to YAML binding. > > > Also, patches for dt-bindings docs usually come after the driver is > > added. > > So, this patch should be the second in the series, not the first. > > > > I don't think so. The convention is to put dt-bindings patch upfront for > all subsystems. Not sure if IIO differs here. Now that you mention, I'm not sure either. We typically sent the dt-bindings one last, so I assumed it was the default. > > Thanks, > Mani > > Alex > > > > > Signed-off-by: Manivannan Sadhasivam > > <manivannan.sadhasivam@linaro.org> > > > --- > > > .../bindings/iio/light/adux1020.txt | 22 > > +++++++++++++++++++ > > > 1 file changed, 22 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/iio/light/adux1020.txt > > > > > > diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > b/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > new file mode 100644 > > > index 000000000000..e896dda30e36 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > @@ -0,0 +1,22 @@ > > > +Analog Devices ADUX1020 Photometric sensor > > > + > > > +Link to datasheet: > > > > > https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf > > > + > > > +Required properties: > > > + > > > + - compatible: should be "adi,adux1020" > > > + - reg: the I2C address of the sensor > > > + > > > +Optional properties: > > > + > > > + - interrupts: interrupt mapping for IRQ as documented in > > > + > > Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > > > + > > > +Example: > > > + > > > +adux1020@64 { > > > + compatible = "adi,adux1020"; > > > + reg = <0x64>; > > > + interrupt-parent = <&msmgpio>; > > > + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; > > > +};
On Mon, 7 Oct 2019 13:21:50 +0000 "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote: > On Mon, 2019-10-07 at 18:10 +0530, Manivannan Sadhasivam wrote: > > [External] > > > > Hi Ardelean, > > > > On 7 October 2019 3:51:16 PM IST, "Ardelean, Alexandru" < > > alexandru.Ardelean@analog.com> wrote: > > > On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote: > > > > [External] > > > > > > > > Add devicetree binding for Analog Devices ADUX1020 Photometric > > > > sensor. > > > > > > > > > > Hey, > > > > > > Thanks for the patches. > > > > > > This dt-binding docs is in text format. > > > dt-binding docs now need to be in YAML format. > > > > > > > Sure. I can convert to YAML binding. > > > > > Also, patches for dt-bindings docs usually come after the driver is > > > added. > > > So, this patch should be the second in the series, not the first. > > > > > > > I don't think so. The convention is to put dt-bindings patch upfront for > > all subsystems. Not sure if IIO differs here. > > Now that you mention, I'm not sure either. > We typically sent the dt-bindings one last, so I assumed it was the > default. I don't care either way so never comment on it :) Jonathan > > > > > Thanks, > > Mani > > > Alex > > > > > > > Signed-off-by: Manivannan Sadhasivam > > > <manivannan.sadhasivam@linaro.org> > > > > --- > > > > .../bindings/iio/light/adux1020.txt | 22 > > > +++++++++++++++++++ > > > > 1 file changed, 22 insertions(+) > > > > create mode 100644 > > > > Documentation/devicetree/bindings/iio/light/adux1020.txt > > > > > > > > diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > > b/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > > new file mode 100644 > > > > index 000000000000..e896dda30e36 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > > @@ -0,0 +1,22 @@ > > > > +Analog Devices ADUX1020 Photometric sensor > > > > + > > > > +Link to datasheet: > > > > > > > https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf > > > > + > > > > +Required properties: > > > > + > > > > + - compatible: should be "adi,adux1020" > > > > + - reg: the I2C address of the sensor > > > > + > > > > +Optional properties: > > > > + > > > > + - interrupts: interrupt mapping for IRQ as documented in > > > > + > > > Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > > > > + > > > > +Example: > > > > + > > > > +adux1020@64 { > > > > + compatible = "adi,adux1020"; > > > > + reg = <0x64>; > > > > + interrupt-parent = <&msmgpio>; > > > > + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; > > > > +};
diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt b/Documentation/devicetree/bindings/iio/light/adux1020.txt new file mode 100644 index 000000000000..e896dda30e36 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt @@ -0,0 +1,22 @@ +Analog Devices ADUX1020 Photometric sensor + +Link to datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf + +Required properties: + + - compatible: should be "adi,adux1020" + - reg: the I2C address of the sensor + +Optional properties: + + - interrupts: interrupt mapping for IRQ as documented in + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Example: + +adux1020@64 { + compatible = "adi,adux1020"; + reg = <0x64>; + interrupt-parent = <&msmgpio>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; +};
Add devicetree binding for Analog Devices ADUX1020 Photometric sensor. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- .../bindings/iio/light/adux1020.txt | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/adux1020.txt -- 2.17.1