diff mbox series

[3/4] ARM: dts: Add RDA8810PL GPIO controllers

Message ID 20191013114037.9845-4-manivannan.sadhasivam@linaro.org
State New
Headers show
Series Add GPIO support for RDA8810PL SoC | expand

Commit Message

Manivannan Sadhasivam Oct. 13, 2019, 11:40 a.m. UTC 
Add GPIO controllers for RDA8810PL SoC. There are 4 GPIO controllers
in this SoC with maximum of 32 gpios. Except GPIOC, all controllers
are capable of generating edge/level interrupts from first 8 lines.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 arch/arm/boot/dts/rda8810pl.dtsi | 48 ++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi
index 19cde895bf65..f30d6ece49fb 100644
--- a/arch/arm/boot/dts/rda8810pl.dtsi
+++ b/arch/arm/boot/dts/rda8810pl.dtsi
@@ -33,6 +33,21 @@ 
 		ranges;
 	};
 
+	modem@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10000000 0xfffffff>;
+
+		gpioc@1a08000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x1a08000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+		};
+	};
+
 	apb@20800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -60,6 +75,39 @@ 
 				     <17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hwtimer", "ostimer";
 		};
+
+		gpioa@30000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x30000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpiob@31000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x31000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpiod@32000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x32000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	apb@20a00000 {