@@ -229,6 +229,28 @@ static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
return ret;
}
+static int ab8500_ext_set_voltage(struct regulator_dev *rdev, int min_uV,
+ int max_uV, unsigned *selector)
+{
+ struct regulation_constraints *regu_constraints = rdev->constraints;
+
+ if (!regu_constraints) {
+ dev_err(rdev_get_dev(rdev), "No regulator constraints\n");
+ return -EINVAL;
+ }
+
+ if (regu_constraints->min_uV == min_uV &&
+ regu_constraints->max_uV == max_uV)
+ return 0;
+
+ dev_err(rdev_get_dev(rdev),
+ "Requested min %duV max %duV != constrained min %duV max %duV\n",
+ min_uV, max_uV,
+ regu_constraints->min_uV, regu_constraints->max_uV);
+
+ return -EINVAL;
+}
+
static int ab8500_ext_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
@@ -252,6 +274,7 @@ static struct regulator_ops ab8500_ext_regulator_ops = {
.is_enabled = ab8500_ext_regulator_is_enabled,
.set_mode = ab8500_ext_regulator_set_mode,
.get_mode = ab8500_ext_regulator_get_mode,
+ .set_voltage = ab8500_ext_set_voltage,
.list_voltage = ab8500_ext_list_voltage,
};
When registering regulators which have a single voltage through Device Tree, the framework insists that the specified voltage is actually set. Well in order to do that we need to provide this call-back, where we check that the value is sane and return without error. Not that the selector isn't populated, but in our case list_voltage doesn't actually use it, so we're good. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/regulator/ab8500-ext.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)