diff mbox

[v4,3/7] clk: gate: add CLK_GATE_HIWORD_MASK

Message ID 1370702843-27172-4-git-send-email-haojian.zhuang@linaro.org
State Accepted
Commit 045779942c04646a222289989e6a5b617dfdedf7
Headers show

Commit Message

Haojian Zhuang June 8, 2013, 2:47 p.m. UTC
In Rockchip Cortex-A9 based chips, they don't use paradigm of
reading-changing-writing the register contents.  Instead they
use a hiword mask to indicate the changed bits.

When b1 should be set as gate, it also needs to indicate the change
by setting hiword mask (b1 << 16).

The patch adds gate flag for this usage.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 drivers/clk/clk-gate.c       | 25 +++++++++++++++++++------
 include/linux/clk-provider.h |  5 +++++
 2 files changed, 24 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 15114fe..790306e 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -53,12 +53,18 @@  static void clk_gate_endisable(struct clk_hw *hw, int enable)
 	if (gate->lock)
 		spin_lock_irqsave(gate->lock, flags);
 
-	reg = readl(gate->reg);
-
-	if (set)
-		reg |= BIT(gate->bit_idx);
-	else
-		reg &= ~BIT(gate->bit_idx);
+	if (gate->flags & CLK_GATE_HIWORD_MASK) {
+		reg = BIT(gate->bit_idx + 16);
+		if (set)
+			reg |= BIT(gate->bit_idx);
+	} else {
+		reg = readl(gate->reg);
+
+		if (set)
+			reg |= BIT(gate->bit_idx);
+		else
+			reg &= ~BIT(gate->bit_idx);
+	}
 
 	writel(reg, gate->reg);
 
@@ -121,6 +127,13 @@  struct clk *clk_register_gate(struct device *dev, const char *name,
 	struct clk *clk;
 	struct clk_init_data init;
 
+	if (clk_gate_flags & CLK_GATE_HIWORD_MASK) {
+		if (bit_idx > 16) {
+			pr_err("gate bit exceeds LOWORD field\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
 	/* allocate the gate */
 	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
 	if (!gate) {
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 8e45fd9..8418b6f 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -210,6 +210,10 @@  void of_fixed_clk_setup(struct device_node *np);
  * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
  * 	enable the clock.  Setting this flag does the opposite: setting the bit
  * 	disable the clock and clearing it enables the clock
+ * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
+ *   of this register, and mask of gate bits are in higher 16-bit of this
+ *   register.  While setting the gate bits, higher 16-bit should also be
+ *   updated to indicate changing gate bits.
  */
 struct clk_gate {
 	struct clk_hw hw;
@@ -220,6 +224,7 @@  struct clk_gate {
 };
 
 #define CLK_GATE_SET_TO_DISABLE		BIT(0)
+#define CLK_GATE_HIWORD_MASK		BIT(1)
 
 extern const struct clk_ops clk_gate_ops;
 struct clk *clk_register_gate(struct device *dev, const char *name,