new file mode 100644
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |-
+ The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+ sensor with square pixel array and 1.58 M effective pixels. This chip
+ features a global shutter with variable charge-integration time. It is
+ programmable through I2C and 4-wire interfaces. The sensor output is
+ available via CSI-2 serial data output (1 Lane).
+
+properties:
+ compatible:
+ const: sony,imx296
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: mclk
+
+ clock-frequency:
+ description:
+ Frequency of the mclk clock in Hertz.
+ default: 37125000
+
+ vddo-supply:
+ description:
+ Definition of the regulator used as interface power supply.
+ maxItems: 1
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+ maxItems: 1
+
+ vddd-supply:
+ description:
+ Definition of the regulator used as digital power supply.
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ maxItems: 1
+
+ # See ./video-interfaces.txt for details
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - vddo-supply
+ - vdda-supply
+ - vddd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ imx296: camera-sensor@1a {
+ compatible = "sony,imx296";
+ reg = <0x1a>;
+ reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_rear_default>;
+ clocks = <&gcc 90>;
+ clock-names = "mclk";
+ clock-frequency = <37125000>;
+ vddo-supply = <&camera_vddo_1v8>;
+ vdda-supply = <&camera_vdda_3v3>;
+ vddd-supply = <&camera_vddd_1v2>;
+
+ port {
+ imx296_ep: endpoint {
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
+
+...
Add devicetree binding for IMX296 CMOS image sensor. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- .../devicetree/bindings/media/i2c/imx296.yaml | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml -- 2.17.1