@@ -1812,6 +1812,301 @@ static int udma_alloc_chan_resources(struct dma_chan *chan)
return ret;
}
+static int udma_slave_config(struct dma_chan *chan,
+ struct dma_slave_config *cfg)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+
+ memcpy(&uc->cfg, cfg, sizeof(uc->cfg));
+
+ return 0;
+}
+
+static void udma_issue_pending(struct dma_chan *chan)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&uc->vc.lock, flags);
+
+ /* If we have something pending and no active descriptor, then */
+ if (vchan_issue_pending(&uc->vc) && !uc->desc) {
+ /*
+ * start a descriptor if the channel is NOT [marked as
+ * terminating _and_ it is still running (teardown has not
+ * completed yet)].
+ */
+ if (!(uc->state == UDMA_CHAN_IS_TERMINATING &&
+ udma_is_chan_running(uc)))
+ udma_start(uc);
+ }
+
+ spin_unlock_irqrestore(&uc->vc.lock, flags);
+}
+
+/* Not much yet */
+static enum dma_status udma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+ enum dma_status ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&uc->vc.lock, flags);
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+
+ if (!udma_is_chan_running(uc))
+ ret = DMA_COMPLETE;
+
+ if (ret == DMA_COMPLETE || !txstate)
+ goto out;
+
+ if (uc->desc && uc->desc->vd.tx.cookie == cookie) {
+ u32 peer_bcnt = 0;
+ u32 bcnt = 0;
+ u32 residue = uc->desc->residue;
+ u32 delay = 0;
+
+ if (uc->desc->dir == DMA_MEM_TO_DEV) {
+ bcnt = udma_tchanrt_read(uc->tchan,
+ UDMA_TCHAN_RT_SBCNT_REG);
+
+ if (uc->ep_type != PSIL_EP_NATIVE) {
+ peer_bcnt = udma_tchanrt_read(uc->tchan,
+ UDMA_TCHAN_RT_PEER_BCNT_REG);
+
+ if (bcnt > peer_bcnt)
+ delay = bcnt - peer_bcnt;
+ }
+ } else if (uc->desc->dir == DMA_DEV_TO_MEM) {
+ bcnt = udma_rchanrt_read(uc->rchan,
+ UDMA_RCHAN_RT_BCNT_REG);
+
+ if (uc->ep_type != PSIL_EP_NATIVE) {
+ peer_bcnt = udma_rchanrt_read(uc->rchan,
+ UDMA_RCHAN_RT_PEER_BCNT_REG);
+
+ if (peer_bcnt > bcnt)
+ delay = peer_bcnt - bcnt;
+ }
+ } else {
+ bcnt = udma_tchanrt_read(uc->tchan,
+ UDMA_TCHAN_RT_BCNT_REG);
+ }
+
+ bcnt -= uc->bcnt;
+ if (bcnt && !(bcnt % uc->desc->residue))
+ residue = 0;
+ else
+ residue -= bcnt % uc->desc->residue;
+
+ if (!residue && (uc->dir == DMA_DEV_TO_MEM || !delay)) {
+ ret = DMA_COMPLETE;
+ delay = 0;
+ }
+
+ dma_set_residue(txstate, residue);
+ dma_set_in_flight_bytes(txstate, delay);
+
+ } else {
+ ret = DMA_COMPLETE;
+ }
+
+out:
+ spin_unlock_irqrestore(&uc->vc.lock, flags);
+ return ret;
+}
+
+
+static int udma_pause(struct dma_chan *chan)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+
+ if (!uc->desc)
+ return -EINVAL;
+
+ /* pause the channel */
+ switch (uc->desc->dir) {
+ case DMA_DEV_TO_MEM:
+ udma_rchanrt_update_bits(uc->rchan,
+ UDMA_RCHAN_RT_PEER_RT_EN_REG,
+ UDMA_PEER_RT_EN_PAUSE,
+ UDMA_PEER_RT_EN_PAUSE);
+ break;
+ case DMA_MEM_TO_DEV:
+ udma_tchanrt_update_bits(uc->tchan,
+ UDMA_TCHAN_RT_PEER_RT_EN_REG,
+ UDMA_PEER_RT_EN_PAUSE,
+ UDMA_PEER_RT_EN_PAUSE);
+ break;
+ case DMA_MEM_TO_MEM:
+ udma_tchanrt_update_bits(uc->tchan, UDMA_TCHAN_RT_CTL_REG,
+ UDMA_CHAN_RT_CTL_PAUSE,
+ UDMA_CHAN_RT_CTL_PAUSE);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int udma_resume(struct dma_chan *chan)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+
+ if (!uc->desc)
+ return -EINVAL;
+
+ /* resume the channel */
+ switch (uc->desc->dir) {
+ case DMA_DEV_TO_MEM:
+ udma_rchanrt_update_bits(uc->rchan,
+ UDMA_RCHAN_RT_PEER_RT_EN_REG,
+ UDMA_PEER_RT_EN_PAUSE, 0);
+
+ break;
+ case DMA_MEM_TO_DEV:
+ udma_tchanrt_update_bits(uc->tchan,
+ UDMA_TCHAN_RT_PEER_RT_EN_REG,
+ UDMA_PEER_RT_EN_PAUSE, 0);
+ break;
+ case DMA_MEM_TO_MEM:
+ udma_tchanrt_update_bits(uc->tchan, UDMA_TCHAN_RT_CTL_REG,
+ UDMA_CHAN_RT_CTL_PAUSE, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int udma_terminate_all(struct dma_chan *chan)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&uc->vc.lock, flags);
+
+ if (udma_is_chan_running(uc))
+ udma_stop(uc);
+
+ if (uc->desc) {
+ uc->terminated_desc = uc->desc;
+ uc->desc = NULL;
+ uc->terminated_desc->terminated = true;
+ }
+
+ uc->paused = false;
+
+ vchan_get_all_descriptors(&uc->vc, &head);
+ spin_unlock_irqrestore(&uc->vc.lock, flags);
+ vchan_dma_desc_free_list(&uc->vc, &head);
+
+ return 0;
+}
+
+static void udma_synchronize(struct dma_chan *chan)
+{
+ struct udma_chan *uc = to_udma_chan(chan);
+ unsigned long timeout = msecs_to_jiffies(1000);
+
+ vchan_synchronize(&uc->vc);
+
+ if (uc->state == UDMA_CHAN_IS_TERMINATING) {
+ timeout = wait_for_completion_timeout(&uc->teardown_completed,
+ timeout);
+ if (!timeout) {
+ dev_warn(uc->ud->dev, "chan%d teardown timeout!\n",
+ uc->id);
+ udma_dump_chan_stdata(uc);
+ udma_reset_chan(uc, true);
+ }
+ }
+
+ udma_reset_chan(uc, false);
+ if (udma_is_chan_running(uc))
+ dev_warn(uc->ud->dev, "chan%d refused to stop!\n", uc->id);
+
+ udma_reset_rings(uc);
+}
+
+static void udma_desc_pre_callback(struct virt_dma_chan *vc,
+ struct virt_dma_desc *vd,
+ struct dmaengine_result *result)
+{
+ struct udma_chan *uc = to_udma_chan(&vc->chan);
+ struct udma_desc *d;
+
+ if (!vd)
+ return;
+
+ d = to_udma_desc(&vd->tx);
+
+ if (d->metadata_size)
+ udma_fetch_epib(uc, d);
+
+ /* Provide residue information for the client */
+ if (result) {
+ void *desc_vaddr = udma_curr_cppi5_desc_vaddr(d, d->desc_idx);
+
+ if (cppi5_desc_get_type(desc_vaddr) ==
+ CPPI5_INFO0_DESC_TYPE_VAL_HOST) {
+ result->residue = cppi5_hdesc_get_pktlen(desc_vaddr);
+ if (result->residue == d->residue)
+ result->result = DMA_TRANS_NOERROR;
+ else
+ result->result = DMA_TRANS_ABORTED;
+ } else {
+ result->residue = d->residue;
+ result->result = DMA_TRANS_NOERROR;
+ }
+ }
+}
+
+/*
+ * This tasklet handles the completion of a DMA descriptor by
+ * calling its callback and freeing it.
+ */
+static void udma_vchan_complete(unsigned long arg)
+{
+ struct virt_dma_chan *vc = (struct virt_dma_chan *)arg;
+ struct virt_dma_desc *vd, *_vd;
+ struct dmaengine_desc_callback cb;
+ LIST_HEAD(head);
+
+ spin_lock_irq(&vc->lock);
+ list_splice_tail_init(&vc->desc_completed, &head);
+ vd = vc->cyclic;
+ if (vd) {
+ vc->cyclic = NULL;
+ dmaengine_desc_get_callback(&vd->tx, &cb);
+ } else {
+ memset(&cb, 0, sizeof(cb));
+ }
+ spin_unlock_irq(&vc->lock);
+
+ udma_desc_pre_callback(vc, vd, NULL);
+ dmaengine_desc_callback_invoke(&cb, NULL);
+
+ list_for_each_entry_safe(vd, _vd, &head, node) {
+ struct dmaengine_result result;
+
+ dmaengine_desc_get_callback(&vd->tx, &cb);
+
+ list_del(&vd->node);
+
+ udma_desc_pre_callback(vc, vd, &result);
+ dmaengine_desc_callback_invoke(&cb, &result);
+
+ vchan_vdesc_fini(vd);
+ }
+}
+
static void udma_free_chan_resources(struct dma_chan *chan)
{
struct udma_chan *uc = to_udma_chan(chan);
Split patch for review containing: device_config, device_issue_pending, device_tx_status, device_pause, device_resume, device_terminate_all and device_synchronize callback implementation and the custom udma_vchan_complete. DMA driver for Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P) The UDMA-P is intended to perform similar (but significantly upgraded) functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P module supports the transmission and reception of various packet types. The UDMA-P is architected to facilitate the segmentation and reassembly of SoC DMA data structure compliant packets to/from smaller data blocks that are natively compatible with the specific requirements of each connected peripheral. Multiple Tx and Rx channels are provided within the DMA which allow multiple segmentation or reassembly operations to be ongoing. The DMA controller maintains state information for each of the channels which allows packet segmentation and reassembly operations to be time division multiplexed between channels in order to share the underlying DMA hardware. An external DMA scheduler is used to control the ordering and rate at which this multiplexing occurs for Transmit operations. The ordering and rate of Receive operations is indirectly controlled by the order in which blocks are pushed into the DMA on the Rx PSI-L interface. The UDMA-P also supports acting as both a UTC and UDMA-C for its internal channels. Channels in the UDMA-P can be configured to be either Packet-Based or Third-Party channels on a channel by channel basis. The initial driver supports: - MEM_TO_MEM (TR mode) - DEV_TO_MEM (Packet / TR mode) - MEM_TO_DEV (Packet / TR mode) - Cyclic (Packet / TR mode) - Metadata for descriptors Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- drivers/dma/ti/k3-udma.c | 295 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 295 insertions(+) -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki