diff mbox series

[4.9,141/222] arm64: dts: lg: Fix SPI controller node names

Message ID 20191122100913.030520124@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Nov. 22, 2019, 10:28 a.m. UTC 
From: Rob Herring <robh@kernel.org>


[ Upstream commit 09bae3b64cb580c95329bd8d16f08f0a5cb81ec9 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 arch/arm64/boot/dts/lg/lg1312.dtsi | 4 ++--
 arch/arm64/boot/dts/lg/lg1313.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index fbafa24cd5335..5e0c5dc973e33 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -167,14 +167,14 @@ 
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index e703e1149c757..f3b1ba6f74220 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -167,14 +167,14 @@ 
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;