| Message ID | 20191219182222.18961-4-manivannan.sadhasivam@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,1/6] media: i2c: imx290: Add support for 2 data lanes | expand |
Hi Manivannan, On Thu, Dec 19, 2019 at 11:52:19PM +0530, Manivannan Sadhasivam wrote: > IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and > 12 bit formats. Since the driver already supports RAW10 mode, let's add > the missing RAW12 mode as well. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > drivers/media/i2c/imx290.c | 32 ++++++++++++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > index 96eea0aafd3e..b6eeca56d3c9 100644 > --- a/drivers/media/i2c/imx290.c > +++ b/drivers/media/i2c/imx290.c > @@ -75,6 +75,7 @@ struct imx290 { > struct clk *xclk; > struct regmap *regmap; > u8 nlanes; > + u8 bpp; > > struct v4l2_subdev sd; > struct v4l2_fwnode_endpoint ep; > @@ -98,6 +99,7 @@ struct imx290_pixfmt { > > static const struct imx290_pixfmt imx290_formats[] = { > { MEDIA_BUS_FMT_SRGGB10_1X10 }, > + { MEDIA_BUS_FMT_SRGGB12_1X12 }, > }; > > static const struct regmap_config imx290_regmap_config = { > @@ -265,6 +267,18 @@ static const struct imx290_regval imx290_10bit_settings[] = { > { 0x300b, 0x00}, > }; > > +static const struct imx290_regval imx290_12bit_settings[] = { > + { 0x3005, 0x01 }, > + { 0x3046, 0x01 }, > + { 0x3129, 0x00 }, > + { 0x317c, 0x00 }, > + { 0x31ec, 0x0e }, > + { 0x3441, 0x0c }, > + { 0x3442, 0x0c }, > + { 0x300a, 0xf0 }, > + { 0x300b, 0x00 }, > +}; > + > /* supported link frequencies */ > static const s64 imx290_link_freq[] = { > IMX290_DEFAULT_LINK_FREQ, > @@ -550,6 +564,21 @@ static int imx290_write_current_format(struct imx290 *imx290, > dev_err(imx290->dev, "Could not set format registers\n"); > return ret; > } > + > + imx290->bpp = 10; > + > + break; > + case MEDIA_BUS_FMT_SRGGB12_1X12: > + ret = imx290_set_register_array(imx290, imx290_12bit_settings, > + ARRAY_SIZE( > + imx290_12bit_settings)); > + if (ret < 0) { > + dev_err(imx290->dev, "Could not set format registers\n"); > + return ret; > + } > + > + imx290->bpp = 12; > + > break; > default: > dev_err(imx290->dev, "Unknown pixel format\n"); > @@ -913,6 +942,9 @@ static int imx290_probe(struct i2c_client *client) > goto free_err; > } > > + /* Default bits per pixel value */ > + imx290->bpp = 10; This has an effect on the pixel rate; please calculate the value based on bpp. > + > mutex_init(&imx290->lock); > > v4l2_ctrl_handler_init(&imx290->ctrls, 4); -- Regards, Sakari Ailus
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c index 96eea0aafd3e..b6eeca56d3c9 100644 --- a/drivers/media/i2c/imx290.c +++ b/drivers/media/i2c/imx290.c @@ -75,6 +75,7 @@ struct imx290 { struct clk *xclk; struct regmap *regmap; u8 nlanes; + u8 bpp; struct v4l2_subdev sd; struct v4l2_fwnode_endpoint ep; @@ -98,6 +99,7 @@ struct imx290_pixfmt { static const struct imx290_pixfmt imx290_formats[] = { { MEDIA_BUS_FMT_SRGGB10_1X10 }, + { MEDIA_BUS_FMT_SRGGB12_1X12 }, }; static const struct regmap_config imx290_regmap_config = { @@ -265,6 +267,18 @@ static const struct imx290_regval imx290_10bit_settings[] = { { 0x300b, 0x00}, }; +static const struct imx290_regval imx290_12bit_settings[] = { + { 0x3005, 0x01 }, + { 0x3046, 0x01 }, + { 0x3129, 0x00 }, + { 0x317c, 0x00 }, + { 0x31ec, 0x0e }, + { 0x3441, 0x0c }, + { 0x3442, 0x0c }, + { 0x300a, 0xf0 }, + { 0x300b, 0x00 }, +}; + /* supported link frequencies */ static const s64 imx290_link_freq[] = { IMX290_DEFAULT_LINK_FREQ, @@ -550,6 +564,21 @@ static int imx290_write_current_format(struct imx290 *imx290, dev_err(imx290->dev, "Could not set format registers\n"); return ret; } + + imx290->bpp = 10; + + break; + case MEDIA_BUS_FMT_SRGGB12_1X12: + ret = imx290_set_register_array(imx290, imx290_12bit_settings, + ARRAY_SIZE( + imx290_12bit_settings)); + if (ret < 0) { + dev_err(imx290->dev, "Could not set format registers\n"); + return ret; + } + + imx290->bpp = 12; + break; default: dev_err(imx290->dev, "Unknown pixel format\n"); @@ -913,6 +942,9 @@ static int imx290_probe(struct i2c_client *client) goto free_err; } + /* Default bits per pixel value */ + imx290->bpp = 10; + mutex_init(&imx290->lock); v4l2_ctrl_handler_init(&imx290->ctrls, 4);
IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and 12 bit formats. Since the driver already supports RAW10 mode, let's add the missing RAW12 mode as well. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/media/i2c/imx290.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) -- 2.17.1