diff mbox series

[v2,1/8] dt-bindings: remoteproc: Add Qualcomm PIL info binding

Message ID 20191227053215.423811-2-bjorn.andersson@linaro.org
State New
Headers show
Series [v2,1/8] dt-bindings: remoteproc: Add Qualcomm PIL info binding | expand

Commit Message

Bjorn Andersson Dec. 27, 2019, 5:32 a.m. UTC 
Add a devicetree binding for the Qualcomm periperal image loader
relocation info region found in the IMEM.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---

Changes since v1:
- New patch

 .../bindings/remoteproc/qcom,pil-info.yaml    | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml

-- 
2.24.0

Comments

Rob Herring Jan. 4, 2020, 9:38 p.m. UTC | #1 
On Thu, Dec 26, 2019 at 09:32:08PM -0800, Bjorn Andersson wrote:
> Add a devicetree binding for the Qualcomm periperal image loader
> relocation info region found in the IMEM.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v1:
> - New patch
> 
>  .../bindings/remoteproc/qcom,pil-info.yaml    | 35 +++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> new file mode 100644
> index 000000000000..715945c683ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> @@ -0,0 +1,35 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm peripheral image loader relocation info binding
> +
> +description:
> +  This document defines the binding for describing the Qualcomm peripheral
> +  image loader relocation memory region, in IMEM, which is used for post mortem
> +  debugging of remoteprocs.
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +properties:
> +  compatible:
> +    const: qcom,pil-reloc-info
> +
> +  offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Offset in the register map for the memory region

Why not use 'reg' instead?

> +
> +examples:
> +  - |
> +    imem@146bf000 {
> +      compatible = "syscon", "simple-mfd";
> +      reg = <0 0x146bf000 0 0x1000>;
> +
> +      pil-reloc {
> +        compatible ="qcom,pil-reloc-info";
> +        offset = <0x94c>;
> +      };
> +    };
> -- 
> 2.24.0
>
Bjorn Andersson Jan. 4, 2020, 10:17 p.m. UTC | #2 
On Sat 04 Jan 13:38 PST 2020, Rob Herring wrote:

> On Thu, Dec 26, 2019 at 09:32:08PM -0800, Bjorn Andersson wrote:
> > Add a devicetree binding for the Qualcomm periperal image loader
> > relocation info region found in the IMEM.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > 
> > Changes since v1:
> > - New patch
> > 
> >  .../bindings/remoteproc/qcom,pil-info.yaml    | 35 +++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > new file mode 100644
> > index 000000000000..715945c683ed
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > @@ -0,0 +1,35 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm peripheral image loader relocation info binding
> > +
> > +description:
> > +  This document defines the binding for describing the Qualcomm peripheral
> > +  image loader relocation memory region, in IMEM, which is used for post mortem
> > +  debugging of remoteprocs.
> > +
> > +maintainers:
> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,pil-reloc-info
> > +
> > +  offset:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: Offset in the register map for the memory region
> 
> Why not use 'reg' instead?
> 

Because we have one prior example of subdevice of "imem", which is
compatible "syscon-reboot-mode" and that binding uses "offset".

That said, if you insist, reg (and ranges) would allow us to express the
size of the region...

Regards,
Bjorn

> > +
> > +examples:
> > +  - |
> > +    imem@146bf000 {
> > +      compatible = "syscon", "simple-mfd";
> > +      reg = <0 0x146bf000 0 0x1000>;
> > +
> > +      pil-reloc {
> > +        compatible ="qcom,pil-reloc-info";
> > +        offset = <0x94c>;
> > +      };
> > +    };
> > -- 
> > 2.24.0
> >
Rob Herring Jan. 23, 2020, 10:07 p.m. UTC | #3 
On Sat, Jan 4, 2020 at 3:17 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Sat 04 Jan 13:38 PST 2020, Rob Herring wrote:
>
> > On Thu, Dec 26, 2019 at 09:32:08PM -0800, Bjorn Andersson wrote:
> > > Add a devicetree binding for the Qualcomm periperal image loader
> > > relocation info region found in the IMEM.
> > >
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > ---
> > >
> > > Changes since v1:
> > > - New patch
> > >
> > >  .../bindings/remoteproc/qcom,pil-info.yaml    | 35 +++++++++++++++++++
> > >  1 file changed, 35 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > > new file mode 100644
> > > index 000000000000..715945c683ed
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > > @@ -0,0 +1,35 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: "http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#"
> > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > > +
> > > +title: Qualcomm peripheral image loader relocation info binding
> > > +
> > > +description:
> > > +  This document defines the binding for describing the Qualcomm peripheral
> > > +  image loader relocation memory region, in IMEM, which is used for post mortem
> > > +  debugging of remoteprocs.
> > > +
> > > +maintainers:
> > > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: qcom,pil-reloc-info
> > > +
> > > +  offset:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    description: Offset in the register map for the memory region
> >
> > Why not use 'reg' instead?
> >
>
> Because we have one prior example of subdevice of "imem", which is
> compatible "syscon-reboot-mode" and that binding uses "offset".

Not that I'm proposing this, but nothing should prevent both from coexisting.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
new file mode 100644
index 000000000000..715945c683ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
@@ -0,0 +1,35 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm peripheral image loader relocation info binding
+
+description:
+  This document defines the binding for describing the Qualcomm peripheral
+  image loader relocation memory region, in IMEM, which is used for post mortem
+  debugging of remoteprocs.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,pil-reloc-info
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the memory region
+
+examples:
+  - |
+    imem@146bf000 {
+      compatible = "syscon", "simple-mfd";
+      reg = <0 0x146bf000 0 0x1000>;
+
+      pil-reloc {
+        compatible ="qcom,pil-reloc-info";
+        offset = <0x94c>;
+      };
+    };