| Message ID | 20200213193717.24551-1-jsarha@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v4] drm/tidss: dispc: Rewrite naive plane positioning code | expand |
On 13/02/2020 21:37, Jyri Sarha wrote: > The old implementation of placing planes on the CRTC while configuring > the planes was naive and relied on the order in which the planes were > configured, enabled, and disabled. The situation where a plane's zpos > was changed on the fly was completely broken. The usual symptoms of > this problem was scrambled display and a flood of sync lost errors, > when a plane was active in two layers at the same time, or a missing > plane, in case when a layer was accidentally disabled. > > The rewrite takes a more straight forward approach when HW is > concerned. The plane positioning registers are in the CRTC (or > actually OVR) register space and it is more natural to configure them > in a one go when configuring the CRTC. To do this we need make sure we > have all the planes on the updated CRTCs in the new atomic state. The > untouched planes on CRTCs that need plane position update are added to > the atomic state in tidss_atomic_check(). The subject needs updating. This is a fix for a bug, and subject needs to reflect that. > Signed-off-by: Jyri Sarha <jsarha@ti.com> > --- > drivers/gpu/drm/tidss/tidss_crtc.c | 55 +++++++++++++++++++++++++++++ > drivers/gpu/drm/tidss/tidss_crtc.h | 2 ++ > drivers/gpu/drm/tidss/tidss_dispc.c | 55 +++++++++++------------------ > drivers/gpu/drm/tidss/tidss_dispc.h | 5 +++ > drivers/gpu/drm/tidss/tidss_kms.c | 49 ++++++++++++++++++++++++- > 5 files changed, 130 insertions(+), 36 deletions(-) > > diff --git a/drivers/gpu/drm/tidss/tidss_crtc.c b/drivers/gpu/drm/tidss/tidss_crtc.c > index 032c31ee2820..631ec61b086a 100644 > --- a/drivers/gpu/drm/tidss/tidss_crtc.c > +++ b/drivers/gpu/drm/tidss/tidss_crtc.c > @@ -17,6 +17,7 @@ > #include "tidss_dispc.h" > #include "tidss_drv.h" > #include "tidss_irq.h" > +#include "tidss_plane.h" > > /* Page flip and frame done IRQs */ > > @@ -111,6 +112,54 @@ static int tidss_crtc_atomic_check(struct drm_crtc *crtc, > return dispc_vp_bus_check(dispc, hw_videoport, state); > } > > +/* > + * This needs all affected planes to be present in the atomic > + * state. The untouched planes are added to the state in > + * tidss_atomic_check(). > + */ > +static void tidss_crtc_position_planes(struct tidss_device *tidss, > + struct drm_crtc *crtc, > + struct drm_crtc_state *old_state, > + bool newmodeset) > +{ > + struct drm_atomic_state *ostate = old_state->state; > + struct tidss_crtc *tcrtc = to_tidss_crtc(crtc); > + struct drm_crtc_state *cstate = crtc->state; > + int zpos; > + > + if (!newmodeset && !cstate->zpos_changed && > + !to_tidss_crtc_state(cstate)->plane_pos_changed) > + return; > + > + for (zpos = 0; zpos < tidss->feat->num_planes; zpos++) { > + struct drm_plane_state *pstate; > + struct drm_plane *plane; > + bool zpos_taken = false; > + int i; > + > + for_each_new_plane_in_state(ostate, plane, pstate, i) { > + if (pstate->crtc != crtc || !pstate->visible) > + continue; > + > + if (pstate->normalized_zpos == zpos) { > + zpos_taken = true; > + break; > + } > + } > + > + if (zpos_taken) { > + struct tidss_plane *tplane = to_tidss_plane(plane); > + > + dispc_ovr_set_plane(tidss->dispc, tplane->hw_plane_id, > + tcrtc->hw_videoport, > + pstate->crtc_x, pstate->crtc_y, > + zpos); > + } > + dispc_ovr_enable_layer(tidss->dispc, tcrtc->hw_videoport, zpos, > + zpos_taken); > + } > +} Nitpicking, but... I think the "zpos" above is really "layer". Even the params, to which you pass "zpos", in the ovr functions are named "layer". "zpos_taken" sounds like it's reserved and not available for us, or something like that. Maybe "layer_active" conveys better that we're just collecting which layers are active and which are not. > + > static void tidss_crtc_atomic_flush(struct drm_crtc *crtc, > struct drm_crtc_state *old_crtc_state) > { > @@ -146,6 +195,9 @@ static void tidss_crtc_atomic_flush(struct drm_crtc *crtc, > /* Write vp properties to HW if needed. */ > dispc_vp_setup(tidss->dispc, tcrtc->hw_videoport, crtc->state, false); > > + /* Update plane positions if needed. */ > + tidss_crtc_position_planes(tidss, crtc, old_crtc_state, false); > + > WARN_ON(drm_crtc_vblank_get(crtc) != 0); > > spin_lock_irqsave(&ddev->event_lock, flags); > @@ -183,6 +235,7 @@ static void tidss_crtc_atomic_enable(struct drm_crtc *crtc, > return; > > dispc_vp_setup(tidss->dispc, tcrtc->hw_videoport, crtc->state, true); > + tidss_crtc_position_planes(tidss, crtc, old_state, true); > > /* Turn vertical blanking interrupt reporting on. */ > drm_crtc_vblank_on(crtc); > @@ -318,6 +371,8 @@ static struct drm_crtc_state *tidss_crtc_duplicate_state(struct drm_crtc *crtc) > > __drm_atomic_helper_crtc_duplicate_state(crtc, &state->base); > > + state->plane_pos_changed = false; > + > state->bus_format = current_state->bus_format; > state->bus_flags = current_state->bus_flags; > > diff --git a/drivers/gpu/drm/tidss/tidss_crtc.h b/drivers/gpu/drm/tidss/tidss_crtc.h > index df9d90b1ad2d..09e773666228 100644 > --- a/drivers/gpu/drm/tidss/tidss_crtc.h > +++ b/drivers/gpu/drm/tidss/tidss_crtc.h > @@ -32,6 +32,8 @@ struct tidss_crtc_state { > /* Must be first. */ > struct drm_crtc_state base; > > + bool plane_pos_changed; > + > u32 bus_format; > u32 bus_flags; > }; > diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c > index eeb160dc047b..e79dad246b1e 100644 > --- a/drivers/gpu/drm/tidss/tidss_dispc.c > +++ b/drivers/gpu/drm/tidss/tidss_dispc.c > @@ -281,11 +281,6 @@ struct dss_vp_data { > u32 *gamma_table; > }; > > -struct dss_plane_data { > - u32 zorder; > - u32 hw_videoport; > -}; > - > struct dispc_device { > struct tidss_device *tidss; > struct device *dev; > @@ -307,8 +302,6 @@ struct dispc_device { > > struct dss_vp_data vp_data[TIDSS_MAX_PORTS]; > > - struct dss_plane_data plane_data[TIDSS_MAX_PLANES]; > - > u32 *fourccs; > u32 num_fourccs; > > @@ -1247,7 +1240,7 @@ int dispc_vp_set_clk_rate(struct dispc_device *dispc, u32 hw_videoport, > /* OVR */ > static void dispc_k2g_ovr_set_plane(struct dispc_device *dispc, > u32 hw_plane, u32 hw_videoport, > - u32 x, u32 y, u32 zpos) > + u32 x, u32 y, u32 layer) > { > /* On k2g there is only one plane and no need for ovr */ > dispc_vid_write(dispc, hw_plane, DISPC_VID_K2G_POSITION, > @@ -1256,44 +1249,43 @@ static void dispc_k2g_ovr_set_plane(struct dispc_device *dispc, > > static void dispc_am65x_ovr_set_plane(struct dispc_device *dispc, > u32 hw_plane, u32 hw_videoport, > - u32 x, u32 y, u32 zpos) > + u32 x, u32 y, u32 layer) > { > - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), > + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), > hw_plane, 4, 1); > - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), > + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), > x, 17, 6); > - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), > + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), > y, 30, 19); > } > > static void dispc_j721e_ovr_set_plane(struct dispc_device *dispc, > u32 hw_plane, u32 hw_videoport, > - u32 x, u32 y, u32 zpos) > + u32 x, u32 y, u32 layer) > { > - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), > + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), > hw_plane, 4, 1); > - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(zpos), > + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(layer), > x, 13, 0); > - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(zpos), > + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(layer), > y, 29, 16); > } > > -static void dispc_ovr_set_plane(struct dispc_device *dispc, > - u32 hw_plane, u32 hw_videoport, > - u32 x, u32 y, u32 zpos) > +void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, > + u32 hw_videoport, u32 x, u32 y, u32 layer) > { > switch (dispc->feat->subrev) { > case DISPC_K2G: > dispc_k2g_ovr_set_plane(dispc, hw_plane, hw_videoport, > - x, y, zpos); > + x, y, layer); > break; > case DISPC_AM65X: > dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport, > - x, y, zpos); > + x, y, layer); > break; > case DISPC_J721E: > dispc_j721e_ovr_set_plane(dispc, hw_plane, hw_videoport, > - x, y, zpos); > + x, y, layer); > break; > default: > WARN_ON(1); > @@ -1301,10 +1293,13 @@ static void dispc_ovr_set_plane(struct dispc_device *dispc, > } > } > > -static void dispc_ovr_enable_plane(struct dispc_device *dispc, > - u32 hw_videoport, u32 zpos, bool enable) > +void dispc_ovr_enable_layer(struct dispc_device *dispc, > + u32 hw_videoport, u32 layer, bool enable) > { > - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), > + if (dispc->feat->subrev == DISPC_K2G) > + return; > + > + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), > !!enable, 0, 0); > } > > @@ -2070,21 +2065,11 @@ int dispc_plane_setup(struct dispc_device *dispc, u32 hw_plane, > VID_REG_FLD_MOD(dispc, hw_plane, DISPC_VID_ATTRIBUTES, 0, > 28, 28); > > - dispc_ovr_set_plane(dispc, hw_plane, hw_videoport, > - state->crtc_x, state->crtc_y, > - state->normalized_zpos); > - > - dispc->plane_data[hw_plane].zorder = state->normalized_zpos; > - dispc->plane_data[hw_plane].hw_videoport = hw_videoport; > - > return 0; > } > > int dispc_plane_enable(struct dispc_device *dispc, u32 hw_plane, bool enable) > { > - dispc_ovr_enable_plane(dispc, dispc->plane_data[hw_plane].hw_videoport, > - dispc->plane_data[hw_plane].zorder, enable); > - > VID_REG_FLD_MOD(dispc, hw_plane, DISPC_VID_ATTRIBUTES, !!enable, 0, 0); > > return 0; > diff --git a/drivers/gpu/drm/tidss/tidss_dispc.h b/drivers/gpu/drm/tidss/tidss_dispc.h > index e65e6a2bb821..a4a68249e44b 100644 > --- a/drivers/gpu/drm/tidss/tidss_dispc.h > +++ b/drivers/gpu/drm/tidss/tidss_dispc.h > @@ -94,6 +94,11 @@ extern const struct dispc_features dispc_j721e_feats; > void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask); > dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc); > > +void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, > + u32 hw_videoport, u32 x, u32 y, u32 layer); > +void dispc_ovr_enable_layer(struct dispc_device *dispc, > + u32 hw_videoport, u32 layer, bool enable); > + > void dispc_vp_prepare(struct dispc_device *dispc, u32 hw_videoport, > const struct drm_crtc_state *state); > void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport, > diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c > index 5311e0f1c551..24b3f02b90c6 100644 > --- a/drivers/gpu/drm/tidss/tidss_kms.c > +++ b/drivers/gpu/drm/tidss/tidss_kms.c > @@ -47,9 +47,56 @@ static const struct drm_mode_config_helper_funcs mode_config_helper_funcs = { > .atomic_commit_tail = tidss_atomic_commit_tail, > }; > > +static int tidss_atomic_check(struct drm_device *ddev, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *opstate; > + struct drm_plane_state *npstate; > + struct drm_plane *plane; > + struct drm_crtc_state *cstate; > + struct drm_crtc *crtc; > + int ret, i; > + > + ret = drm_atomic_helper_check(ddev, state); > + if (ret) > + return ret; > + > + /* > + * If a plane on a CRTC changes add all active planes on that Only if the plane's position (x/y/z) changes. > + * CRTC to the atomic state. This is needed for updating the > + * plane positions in tidss_crtc_position_planes() which is > + * called from crtc_atomic_enable() and crtc_atomic_flush(). > + * The update is needed for x,y-position changes too, so > + * zpos_changed condition is not enough and we need add the > + * our own plane_pos_changed flag. Strictly speaking, we don't need to add all active planes if only plane's x/y pos changes. In that case it's enough to just update the OVR layer's x & y. And when a plane is enabled or disabled, we need to update OVR. Does the code handled that? Keeping plane's x/y/z pos the same, but enabling and disabling it. I think both zpos_changed and pos_changed could be false in that case. > + */ > + for_each_oldnew_plane_in_state(state, plane, opstate, npstate, i) { > + if (npstate->crtc && npstate->visible && > + (!opstate->crtc || > + opstate->crtc_x != npstate->crtc_x || > + opstate->crtc_y != npstate->crtc_y)) { The above becomes a bit easier to read if you first: if (!npstate->crtc || !npstate->visible) continue; > + cstate = drm_atomic_get_crtc_state(state, > + npstate->crtc); > + if (IS_ERR(cstate)) > + return PTR_ERR(cstate); > + to_tidss_crtc_state(cstate)->plane_pos_changed = true; > + } > + } Add blank line here. > + for_each_new_crtc_in_state(state, crtc, cstate, i) { > + if (to_tidss_crtc_state(cstate)->plane_pos_changed || > + cstate->zpos_changed) { > + ret = drm_atomic_add_affected_planes(state, crtc); > + if (ret) > + return ret; > + } > + } Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
On 14/02/2020 13:20, Tomi Valkeinen wrote: > On 13/02/2020 21:37, Jyri Sarha wrote: >> The old implementation of placing planes on the CRTC while configuring >> the planes was naive and relied on the order in which the planes were >> configured, enabled, and disabled. The situation where a plane's zpos >> was changed on the fly was completely broken. The usual symptoms of >> this problem was scrambled display and a flood of sync lost errors, >> when a plane was active in two layers at the same time, or a missing >> plane, in case when a layer was accidentally disabled. >> >> The rewrite takes a more straight forward approach when HW is >> concerned. The plane positioning registers are in the CRTC (or >> actually OVR) register space and it is more natural to configure them >> in a one go when configuring the CRTC. To do this we need make sure we >> have all the planes on the updated CRTCs in the new atomic state. The >> untouched planes on CRTCs that need plane position update are added to >> the atomic state in tidss_atomic_check(). > > The subject needs updating. This is a fix for a bug, and subject needs > to reflect that. > Ok >> Signed-off-by: Jyri Sarha <jsarha@ti.com> >> --- >> drivers/gpu/drm/tidss/tidss_crtc.c | 55 +++++++++++++++++++++++++++++ >> drivers/gpu/drm/tidss/tidss_crtc.h | 2 ++ >> drivers/gpu/drm/tidss/tidss_dispc.c | 55 +++++++++++------------------ >> drivers/gpu/drm/tidss/tidss_dispc.h | 5 +++ >> drivers/gpu/drm/tidss/tidss_kms.c | 49 ++++++++++++++++++++++++- >> 5 files changed, 130 insertions(+), 36 deletions(-) >> >> diff --git a/drivers/gpu/drm/tidss/tidss_crtc.c >> b/drivers/gpu/drm/tidss/tidss_crtc.c >> index 032c31ee2820..631ec61b086a 100644 >> --- a/drivers/gpu/drm/tidss/tidss_crtc.c >> +++ b/drivers/gpu/drm/tidss/tidss_crtc.c >> @@ -17,6 +17,7 @@ >> #include "tidss_dispc.h" >> #include "tidss_drv.h" >> #include "tidss_irq.h" >> +#include "tidss_plane.h" >> /* Page flip and frame done IRQs */ >> @@ -111,6 +112,54 @@ static int tidss_crtc_atomic_check(struct >> drm_crtc *crtc, >> return dispc_vp_bus_check(dispc, hw_videoport, state); >> } >> +/* >> + * This needs all affected planes to be present in the atomic >> + * state. The untouched planes are added to the state in >> + * tidss_atomic_check(). >> + */ >> +static void tidss_crtc_position_planes(struct tidss_device *tidss, >> + struct drm_crtc *crtc, >> + struct drm_crtc_state *old_state, >> + bool newmodeset) >> +{ >> + struct drm_atomic_state *ostate = old_state->state; >> + struct tidss_crtc *tcrtc = to_tidss_crtc(crtc); >> + struct drm_crtc_state *cstate = crtc->state; >> + int zpos; >> + >> + if (!newmodeset && !cstate->zpos_changed && >> + !to_tidss_crtc_state(cstate)->plane_pos_changed) >> + return; >> + >> + for (zpos = 0; zpos < tidss->feat->num_planes; zpos++) { >> + struct drm_plane_state *pstate; >> + struct drm_plane *plane; >> + bool zpos_taken = false; >> + int i; >> + >> + for_each_new_plane_in_state(ostate, plane, pstate, i) { >> + if (pstate->crtc != crtc || !pstate->visible) >> + continue; >> + >> + if (pstate->normalized_zpos == zpos) { >> + zpos_taken = true; >> + break; >> + } >> + } >> + >> + if (zpos_taken) { >> + struct tidss_plane *tplane = to_tidss_plane(plane); >> + >> + dispc_ovr_set_plane(tidss->dispc, tplane->hw_plane_id, >> + tcrtc->hw_videoport, >> + pstate->crtc_x, pstate->crtc_y, >> + zpos); >> + } >> + dispc_ovr_enable_layer(tidss->dispc, tcrtc->hw_videoport, zpos, >> + zpos_taken); >> + } >> +} > > Nitpicking, but... I think the "zpos" above is really "layer". Even the > params, to which you pass "zpos", in the ovr functions are named "layer". > Well, it is both. But I'll change that. > "zpos_taken" sounds like it's reserved and not available for us, or > something like that. Maybe "layer_active" conveys better that we're just > collecting which layers are active and which are not. > Ok, that sounds better. >> + >> static void tidss_crtc_atomic_flush(struct drm_crtc *crtc, >> struct drm_crtc_state *old_crtc_state) >> { >> @@ -146,6 +195,9 @@ static void tidss_crtc_atomic_flush(struct >> drm_crtc *crtc, >> /* Write vp properties to HW if needed. */ >> dispc_vp_setup(tidss->dispc, tcrtc->hw_videoport, crtc->state, >> false); >> + /* Update plane positions if needed. */ >> + tidss_crtc_position_planes(tidss, crtc, old_crtc_state, false); >> + >> WARN_ON(drm_crtc_vblank_get(crtc) != 0); >> spin_lock_irqsave(&ddev->event_lock, flags); >> @@ -183,6 +235,7 @@ static void tidss_crtc_atomic_enable(struct >> drm_crtc *crtc, >> return; >> dispc_vp_setup(tidss->dispc, tcrtc->hw_videoport, crtc->state, >> true); >> + tidss_crtc_position_planes(tidss, crtc, old_state, true); >> /* Turn vertical blanking interrupt reporting on. */ >> drm_crtc_vblank_on(crtc); >> @@ -318,6 +371,8 @@ static struct drm_crtc_state >> *tidss_crtc_duplicate_state(struct drm_crtc *crtc) >> __drm_atomic_helper_crtc_duplicate_state(crtc, &state->base); >> + state->plane_pos_changed = false; >> + >> state->bus_format = current_state->bus_format; >> state->bus_flags = current_state->bus_flags; >> diff --git a/drivers/gpu/drm/tidss/tidss_crtc.h >> b/drivers/gpu/drm/tidss/tidss_crtc.h >> index df9d90b1ad2d..09e773666228 100644 >> --- a/drivers/gpu/drm/tidss/tidss_crtc.h >> +++ b/drivers/gpu/drm/tidss/tidss_crtc.h >> @@ -32,6 +32,8 @@ struct tidss_crtc_state { >> /* Must be first. */ >> struct drm_crtc_state base; >> + bool plane_pos_changed; >> + >> u32 bus_format; >> u32 bus_flags; >> }; >> diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c >> b/drivers/gpu/drm/tidss/tidss_dispc.c >> index eeb160dc047b..e79dad246b1e 100644 >> --- a/drivers/gpu/drm/tidss/tidss_dispc.c >> +++ b/drivers/gpu/drm/tidss/tidss_dispc.c >> @@ -281,11 +281,6 @@ struct dss_vp_data { >> u32 *gamma_table; >> }; >> -struct dss_plane_data { >> - u32 zorder; >> - u32 hw_videoport; >> -}; >> - >> struct dispc_device { >> struct tidss_device *tidss; >> struct device *dev; >> @@ -307,8 +302,6 @@ struct dispc_device { >> struct dss_vp_data vp_data[TIDSS_MAX_PORTS]; >> - struct dss_plane_data plane_data[TIDSS_MAX_PLANES]; >> - >> u32 *fourccs; >> u32 num_fourccs; >> @@ -1247,7 +1240,7 @@ int dispc_vp_set_clk_rate(struct dispc_device >> *dispc, u32 hw_videoport, >> /* OVR */ >> static void dispc_k2g_ovr_set_plane(struct dispc_device *dispc, >> u32 hw_plane, u32 hw_videoport, >> - u32 x, u32 y, u32 zpos) >> + u32 x, u32 y, u32 layer) >> { >> /* On k2g there is only one plane and no need for ovr */ >> dispc_vid_write(dispc, hw_plane, DISPC_VID_K2G_POSITION, >> @@ -1256,44 +1249,43 @@ static void dispc_k2g_ovr_set_plane(struct >> dispc_device *dispc, >> static void dispc_am65x_ovr_set_plane(struct dispc_device *dispc, >> u32 hw_plane, u32 hw_videoport, >> - u32 x, u32 y, u32 zpos) >> + u32 x, u32 y, u32 layer) >> { >> - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), >> + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), >> hw_plane, 4, 1); >> - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), >> + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), >> x, 17, 6); >> - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), >> + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), >> y, 30, 19); >> } >> static void dispc_j721e_ovr_set_plane(struct dispc_device *dispc, >> u32 hw_plane, u32 hw_videoport, >> - u32 x, u32 y, u32 zpos) >> + u32 x, u32 y, u32 layer) >> { >> - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), >> + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), >> hw_plane, 4, 1); >> - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(zpos), >> + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(layer), >> x, 13, 0); >> - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(zpos), >> + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(layer), >> y, 29, 16); >> } >> -static void dispc_ovr_set_plane(struct dispc_device *dispc, >> - u32 hw_plane, u32 hw_videoport, >> - u32 x, u32 y, u32 zpos) >> +void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, >> + u32 hw_videoport, u32 x, u32 y, u32 layer) >> { >> switch (dispc->feat->subrev) { >> case DISPC_K2G: >> dispc_k2g_ovr_set_plane(dispc, hw_plane, hw_videoport, >> - x, y, zpos); >> + x, y, layer); >> break; >> case DISPC_AM65X: >> dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport, >> - x, y, zpos); >> + x, y, layer); >> break; >> case DISPC_J721E: >> dispc_j721e_ovr_set_plane(dispc, hw_plane, hw_videoport, >> - x, y, zpos); >> + x, y, layer); >> break; >> default: >> WARN_ON(1); >> @@ -1301,10 +1293,13 @@ static void dispc_ovr_set_plane(struct >> dispc_device *dispc, >> } >> } >> -static void dispc_ovr_enable_plane(struct dispc_device *dispc, >> - u32 hw_videoport, u32 zpos, bool enable) >> +void dispc_ovr_enable_layer(struct dispc_device *dispc, >> + u32 hw_videoport, u32 layer, bool enable) >> { >> - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), >> + if (dispc->feat->subrev == DISPC_K2G) >> + return; >> + >> + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), >> !!enable, 0, 0); >> } >> @@ -2070,21 +2065,11 @@ int dispc_plane_setup(struct dispc_device >> *dispc, u32 hw_plane, >> VID_REG_FLD_MOD(dispc, hw_plane, DISPC_VID_ATTRIBUTES, 0, >> 28, 28); >> - dispc_ovr_set_plane(dispc, hw_plane, hw_videoport, >> - state->crtc_x, state->crtc_y, >> - state->normalized_zpos); >> - >> - dispc->plane_data[hw_plane].zorder = state->normalized_zpos; >> - dispc->plane_data[hw_plane].hw_videoport = hw_videoport; >> - >> return 0; >> } >> int dispc_plane_enable(struct dispc_device *dispc, u32 hw_plane, >> bool enable) >> { >> - dispc_ovr_enable_plane(dispc, >> dispc->plane_data[hw_plane].hw_videoport, >> - dispc->plane_data[hw_plane].zorder, enable); >> - >> VID_REG_FLD_MOD(dispc, hw_plane, DISPC_VID_ATTRIBUTES, !!enable, >> 0, 0); >> return 0; >> diff --git a/drivers/gpu/drm/tidss/tidss_dispc.h >> b/drivers/gpu/drm/tidss/tidss_dispc.h >> index e65e6a2bb821..a4a68249e44b 100644 >> --- a/drivers/gpu/drm/tidss/tidss_dispc.h >> +++ b/drivers/gpu/drm/tidss/tidss_dispc.h >> @@ -94,6 +94,11 @@ extern const struct dispc_features dispc_j721e_feats; >> void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask); >> dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc); >> +void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, >> + u32 hw_videoport, u32 x, u32 y, u32 layer); >> +void dispc_ovr_enable_layer(struct dispc_device *dispc, >> + u32 hw_videoport, u32 layer, bool enable); >> + >> void dispc_vp_prepare(struct dispc_device *dispc, u32 hw_videoport, >> const struct drm_crtc_state *state); >> void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport, >> diff --git a/drivers/gpu/drm/tidss/tidss_kms.c >> b/drivers/gpu/drm/tidss/tidss_kms.c >> index 5311e0f1c551..24b3f02b90c6 100644 >> --- a/drivers/gpu/drm/tidss/tidss_kms.c >> +++ b/drivers/gpu/drm/tidss/tidss_kms.c >> @@ -47,9 +47,56 @@ static const struct drm_mode_config_helper_funcs >> mode_config_helper_funcs = { >> .atomic_commit_tail = tidss_atomic_commit_tail, >> }; >> +static int tidss_atomic_check(struct drm_device *ddev, >> + struct drm_atomic_state *state) >> +{ >> + struct drm_plane_state *opstate; >> + struct drm_plane_state *npstate; >> + struct drm_plane *plane; >> + struct drm_crtc_state *cstate; >> + struct drm_crtc *crtc; >> + int ret, i; >> + >> + ret = drm_atomic_helper_check(ddev, state); >> + if (ret) >> + return ret; >> + >> + /* >> + * If a plane on a CRTC changes add all active planes on that > > Only if the plane's position (x/y/z) changes. > Ok. >> + * CRTC to the atomic state. This is needed for updating the >> + * plane positions in tidss_crtc_position_planes() which is >> + * called from crtc_atomic_enable() and crtc_atomic_flush(). >> + * The update is needed for x,y-position changes too, so >> + * zpos_changed condition is not enough and we need add the >> + * our own plane_pos_changed flag. > > Strictly speaking, we don't need to add all active planes if only > plane's x/y pos changes. In that case it's enough to just update the OVR > layer's x & y. > The we are back to plane-specific updates. The whole idea of this fix is to keep things simple and just update all ovr layers if anything there changes. > And when a plane is enabled or disabled, we need to update OVR. Does the > code handled that? Keeping plane's x/y/z pos the same, but enabling and > disabling it. I think both zpos_changed and pos_changed could be false > in that case. > zpos_changed flag handles that. If any plane on the crtc is disabled/enabled/moved then the flag is set (in drm_atomic_normalize_zpos()). >> + */ >> + for_each_oldnew_plane_in_state(state, plane, opstate, npstate, i) { >> + if (npstate->crtc && npstate->visible && >> + (!opstate->crtc || >> + opstate->crtc_x != npstate->crtc_x || >> + opstate->crtc_y != npstate->crtc_y)) { > > The above becomes a bit easier to read if you first: > > if (!npstate->crtc || !npstate->visible) > continue; > Sure. >> + cstate = drm_atomic_get_crtc_state(state, >> + npstate->crtc); >> + if (IS_ERR(cstate)) >> + return PTR_ERR(cstate); >> + to_tidss_crtc_state(cstate)->plane_pos_changed = true; >> + } >> + } > > Add blank line here. > The two loops are part of the same procedure, but never mind I'll add a newline. >> + for_each_new_crtc_in_state(state, crtc, cstate, i) { >> + if (to_tidss_crtc_state(cstate)->plane_pos_changed || >> + cstate->zpos_changed) { >> + ret = drm_atomic_add_affected_planes(state, crtc); >> + if (ret) >> + return ret; >> + } >> + } > > Tomi >
diff --git a/drivers/gpu/drm/tidss/tidss_crtc.c b/drivers/gpu/drm/tidss/tidss_crtc.c index 032c31ee2820..631ec61b086a 100644 --- a/drivers/gpu/drm/tidss/tidss_crtc.c +++ b/drivers/gpu/drm/tidss/tidss_crtc.c @@ -17,6 +17,7 @@ #include "tidss_dispc.h" #include "tidss_drv.h" #include "tidss_irq.h" +#include "tidss_plane.h" /* Page flip and frame done IRQs */ @@ -111,6 +112,54 @@ static int tidss_crtc_atomic_check(struct drm_crtc *crtc, return dispc_vp_bus_check(dispc, hw_videoport, state); } +/* + * This needs all affected planes to be present in the atomic + * state. The untouched planes are added to the state in + * tidss_atomic_check(). + */ +static void tidss_crtc_position_planes(struct tidss_device *tidss, + struct drm_crtc *crtc, + struct drm_crtc_state *old_state, + bool newmodeset) +{ + struct drm_atomic_state *ostate = old_state->state; + struct tidss_crtc *tcrtc = to_tidss_crtc(crtc); + struct drm_crtc_state *cstate = crtc->state; + int zpos; + + if (!newmodeset && !cstate->zpos_changed && + !to_tidss_crtc_state(cstate)->plane_pos_changed) + return; + + for (zpos = 0; zpos < tidss->feat->num_planes; zpos++) { + struct drm_plane_state *pstate; + struct drm_plane *plane; + bool zpos_taken = false; + int i; + + for_each_new_plane_in_state(ostate, plane, pstate, i) { + if (pstate->crtc != crtc || !pstate->visible) + continue; + + if (pstate->normalized_zpos == zpos) { + zpos_taken = true; + break; + } + } + + if (zpos_taken) { + struct tidss_plane *tplane = to_tidss_plane(plane); + + dispc_ovr_set_plane(tidss->dispc, tplane->hw_plane_id, + tcrtc->hw_videoport, + pstate->crtc_x, pstate->crtc_y, + zpos); + } + dispc_ovr_enable_layer(tidss->dispc, tcrtc->hw_videoport, zpos, + zpos_taken); + } +} + static void tidss_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state) { @@ -146,6 +195,9 @@ static void tidss_crtc_atomic_flush(struct drm_crtc *crtc, /* Write vp properties to HW if needed. */ dispc_vp_setup(tidss->dispc, tcrtc->hw_videoport, crtc->state, false); + /* Update plane positions if needed. */ + tidss_crtc_position_planes(tidss, crtc, old_crtc_state, false); + WARN_ON(drm_crtc_vblank_get(crtc) != 0); spin_lock_irqsave(&ddev->event_lock, flags); @@ -183,6 +235,7 @@ static void tidss_crtc_atomic_enable(struct drm_crtc *crtc, return; dispc_vp_setup(tidss->dispc, tcrtc->hw_videoport, crtc->state, true); + tidss_crtc_position_planes(tidss, crtc, old_state, true); /* Turn vertical blanking interrupt reporting on. */ drm_crtc_vblank_on(crtc); @@ -318,6 +371,8 @@ static struct drm_crtc_state *tidss_crtc_duplicate_state(struct drm_crtc *crtc) __drm_atomic_helper_crtc_duplicate_state(crtc, &state->base); + state->plane_pos_changed = false; + state->bus_format = current_state->bus_format; state->bus_flags = current_state->bus_flags; diff --git a/drivers/gpu/drm/tidss/tidss_crtc.h b/drivers/gpu/drm/tidss/tidss_crtc.h index df9d90b1ad2d..09e773666228 100644 --- a/drivers/gpu/drm/tidss/tidss_crtc.h +++ b/drivers/gpu/drm/tidss/tidss_crtc.h @@ -32,6 +32,8 @@ struct tidss_crtc_state { /* Must be first. */ struct drm_crtc_state base; + bool plane_pos_changed; + u32 bus_format; u32 bus_flags; }; diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c index eeb160dc047b..e79dad246b1e 100644 --- a/drivers/gpu/drm/tidss/tidss_dispc.c +++ b/drivers/gpu/drm/tidss/tidss_dispc.c @@ -281,11 +281,6 @@ struct dss_vp_data { u32 *gamma_table; }; -struct dss_plane_data { - u32 zorder; - u32 hw_videoport; -}; - struct dispc_device { struct tidss_device *tidss; struct device *dev; @@ -307,8 +302,6 @@ struct dispc_device { struct dss_vp_data vp_data[TIDSS_MAX_PORTS]; - struct dss_plane_data plane_data[TIDSS_MAX_PLANES]; - u32 *fourccs; u32 num_fourccs; @@ -1247,7 +1240,7 @@ int dispc_vp_set_clk_rate(struct dispc_device *dispc, u32 hw_videoport, /* OVR */ static void dispc_k2g_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, u32 hw_videoport, - u32 x, u32 y, u32 zpos) + u32 x, u32 y, u32 layer) { /* On k2g there is only one plane and no need for ovr */ dispc_vid_write(dispc, hw_plane, DISPC_VID_K2G_POSITION, @@ -1256,44 +1249,43 @@ static void dispc_k2g_ovr_set_plane(struct dispc_device *dispc, static void dispc_am65x_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, u32 hw_videoport, - u32 x, u32 y, u32 zpos) + u32 x, u32 y, u32 layer) { - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), hw_plane, 4, 1); - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), x, 17, 6); - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), y, 30, 19); } static void dispc_j721e_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, u32 hw_videoport, - u32 x, u32 y, u32 zpos) + u32 x, u32 y, u32 layer) { - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), hw_plane, 4, 1); - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(zpos), + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(layer), x, 13, 0); - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(zpos), + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES2(layer), y, 29, 16); } -static void dispc_ovr_set_plane(struct dispc_device *dispc, - u32 hw_plane, u32 hw_videoport, - u32 x, u32 y, u32 zpos) +void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, + u32 hw_videoport, u32 x, u32 y, u32 layer) { switch (dispc->feat->subrev) { case DISPC_K2G: dispc_k2g_ovr_set_plane(dispc, hw_plane, hw_videoport, - x, y, zpos); + x, y, layer); break; case DISPC_AM65X: dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport, - x, y, zpos); + x, y, layer); break; case DISPC_J721E: dispc_j721e_ovr_set_plane(dispc, hw_plane, hw_videoport, - x, y, zpos); + x, y, layer); break; default: WARN_ON(1); @@ -1301,10 +1293,13 @@ static void dispc_ovr_set_plane(struct dispc_device *dispc, } } -static void dispc_ovr_enable_plane(struct dispc_device *dispc, - u32 hw_videoport, u32 zpos, bool enable) +void dispc_ovr_enable_layer(struct dispc_device *dispc, + u32 hw_videoport, u32 layer, bool enable) { - OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(zpos), + if (dispc->feat->subrev == DISPC_K2G) + return; + + OVR_REG_FLD_MOD(dispc, hw_videoport, DISPC_OVR_ATTRIBUTES(layer), !!enable, 0, 0); } @@ -2070,21 +2065,11 @@ int dispc_plane_setup(struct dispc_device *dispc, u32 hw_plane, VID_REG_FLD_MOD(dispc, hw_plane, DISPC_VID_ATTRIBUTES, 0, 28, 28); - dispc_ovr_set_plane(dispc, hw_plane, hw_videoport, - state->crtc_x, state->crtc_y, - state->normalized_zpos); - - dispc->plane_data[hw_plane].zorder = state->normalized_zpos; - dispc->plane_data[hw_plane].hw_videoport = hw_videoport; - return 0; } int dispc_plane_enable(struct dispc_device *dispc, u32 hw_plane, bool enable) { - dispc_ovr_enable_plane(dispc, dispc->plane_data[hw_plane].hw_videoport, - dispc->plane_data[hw_plane].zorder, enable); - VID_REG_FLD_MOD(dispc, hw_plane, DISPC_VID_ATTRIBUTES, !!enable, 0, 0); return 0; diff --git a/drivers/gpu/drm/tidss/tidss_dispc.h b/drivers/gpu/drm/tidss/tidss_dispc.h index e65e6a2bb821..a4a68249e44b 100644 --- a/drivers/gpu/drm/tidss/tidss_dispc.h +++ b/drivers/gpu/drm/tidss/tidss_dispc.h @@ -94,6 +94,11 @@ extern const struct dispc_features dispc_j721e_feats; void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask); dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc); +void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, + u32 hw_videoport, u32 x, u32 y, u32 layer); +void dispc_ovr_enable_layer(struct dispc_device *dispc, + u32 hw_videoport, u32 layer, bool enable); + void dispc_vp_prepare(struct dispc_device *dispc, u32 hw_videoport, const struct drm_crtc_state *state); void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport, diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c index 5311e0f1c551..24b3f02b90c6 100644 --- a/drivers/gpu/drm/tidss/tidss_kms.c +++ b/drivers/gpu/drm/tidss/tidss_kms.c @@ -47,9 +47,56 @@ static const struct drm_mode_config_helper_funcs mode_config_helper_funcs = { .atomic_commit_tail = tidss_atomic_commit_tail, }; +static int tidss_atomic_check(struct drm_device *ddev, + struct drm_atomic_state *state) +{ + struct drm_plane_state *opstate; + struct drm_plane_state *npstate; + struct drm_plane *plane; + struct drm_crtc_state *cstate; + struct drm_crtc *crtc; + int ret, i; + + ret = drm_atomic_helper_check(ddev, state); + if (ret) + return ret; + + /* + * If a plane on a CRTC changes add all active planes on that + * CRTC to the atomic state. This is needed for updating the + * plane positions in tidss_crtc_position_planes() which is + * called from crtc_atomic_enable() and crtc_atomic_flush(). + * The update is needed for x,y-position changes too, so + * zpos_changed condition is not enough and we need add the + * our own plane_pos_changed flag. + */ + for_each_oldnew_plane_in_state(state, plane, opstate, npstate, i) { + if (npstate->crtc && npstate->visible && + (!opstate->crtc || + opstate->crtc_x != npstate->crtc_x || + opstate->crtc_y != npstate->crtc_y)) { + cstate = drm_atomic_get_crtc_state(state, + npstate->crtc); + if (IS_ERR(cstate)) + return PTR_ERR(cstate); + to_tidss_crtc_state(cstate)->plane_pos_changed = true; + } + } + for_each_new_crtc_in_state(state, crtc, cstate, i) { + if (to_tidss_crtc_state(cstate)->plane_pos_changed || + cstate->zpos_changed) { + ret = drm_atomic_add_affected_planes(state, crtc); + if (ret) + return ret; + } + } + + return 0; +} + static const struct drm_mode_config_funcs mode_config_funcs = { .fb_create = drm_gem_fb_create, - .atomic_check = drm_atomic_helper_check, + .atomic_check = tidss_atomic_check, .atomic_commit = drm_atomic_helper_commit, };
The old implementation of placing planes on the CRTC while configuring the planes was naive and relied on the order in which the planes were configured, enabled, and disabled. The situation where a plane's zpos was changed on the fly was completely broken. The usual symptoms of this problem was scrambled display and a flood of sync lost errors, when a plane was active in two layers at the same time, or a missing plane, in case when a layer was accidentally disabled. The rewrite takes a more straight forward approach when HW is concerned. The plane positioning registers are in the CRTC (or actually OVR) register space and it is more natural to configure them in a one go when configuring the CRTC. To do this we need make sure we have all the planes on the updated CRTCs in the new atomic state. The untouched planes on CRTCs that need plane position update are added to the atomic state in tidss_atomic_check(). Signed-off-by: Jyri Sarha <jsarha@ti.com> --- drivers/gpu/drm/tidss/tidss_crtc.c | 55 +++++++++++++++++++++++++++++ drivers/gpu/drm/tidss/tidss_crtc.h | 2 ++ drivers/gpu/drm/tidss/tidss_dispc.c | 55 +++++++++++------------------ drivers/gpu/drm/tidss/tidss_dispc.h | 5 +++ drivers/gpu/drm/tidss/tidss_kms.c | 49 ++++++++++++++++++++++++- 5 files changed, 130 insertions(+), 36 deletions(-) -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel