@@ -3235,9 +3235,9 @@
##
# @SshHostKeyCheckMode:
#
-# @none Don't check the host key at all
-# @hash Compare the host key with a given hash
-# @known_hosts Check the host key against the known_hosts file
+# @none: Don't check the host key at all
+# @hash: Compare the host key with a given hash
+# @known_hosts: Check the host key against the known_hosts file
#
# Since: 2.12
##
@@ -3247,8 +3247,8 @@
##
# @SshHostKeyCheckHashType:
#
-# @md5 The given hash is an md5 hash
-# @sha1 The given hash is an sha1 hash
+# @md5: The given hash is an md5 hash
+# @sha1: The given hash is an sha1 hash
#
# Since: 2.12
##
@@ -3258,8 +3258,8 @@
##
# @SshHostKeyHash:
#
-# @type The hash algorithm used for the hash
-# @hash The expected hash value
+# @type: The hash algorithm used for the hash
+# @hash: The expected hash value
#
# Since: 2.12
##
@@ -4265,13 +4265,13 @@
#
# Driver specific image creation options for file.
#
-# @filename Filename for the new image file
-# @size Size of the virtual disk in bytes
-# @preallocation Preallocation mode for the new image (default: off;
-# allowed values: off,
-# falloc (if defined CONFIG_POSIX_FALLOCATE),
-# full (if defined CONFIG_POSIX))
-# @nocow Turn off copy-on-write (valid only on btrfs; default: off)
+# @filename: Filename for the new image file
+# @size: Size of the virtual disk in bytes
+# @preallocation: Preallocation mode for the new image (default: off;
+# allowed values: off,
+# falloc (if defined CONFIG_POSIX_FALLOCATE),
+# full (if defined CONFIG_POSIX))
+# @nocow: Turn off copy-on-write (valid only on btrfs; default: off)
#
# Since: 2.12
##
@@ -4286,12 +4286,12 @@
#
# Driver specific image creation options for gluster.
#
-# @location Where to store the new image file
-# @size Size of the virtual disk in bytes
-# @preallocation Preallocation mode for the new image (default: off;
-# allowed values: off,
-# falloc (if defined CONFIG_GLUSTERFS_FALLOCATE),
-# full (if defined CONFIG_GLUSTERFS_ZEROFILL))
+# @location: Where to store the new image file
+# @size: Size of the virtual disk in bytes
+# @preallocation: Preallocation mode for the new image (default: off;
+# allowed values: off,
+# falloc (if defined CONFIG_GLUSTERFS_FALLOCATE),
+# full (if defined CONFIG_GLUSTERFS_ZEROFILL))
#
# Since: 2.12
##
@@ -4305,11 +4305,11 @@
#
# Driver specific image creation options for LUKS.
#
-# @file Node to create the image format on
-# @size Size of the virtual disk in bytes
-# @preallocation Preallocation mode for the new image
-# (since: 4.2)
-# (default: off; allowed values: off, metadata, falloc, full)
+# @file: Node to create the image format on
+# @size: Size of the virtual disk in bytes
+# @preallocation: Preallocation mode for the new image
+# (since: 4.2)
+# (default: off; allowed values: off, metadata, falloc, full)
#
# Since: 2.12
##
@@ -4324,8 +4324,8 @@
#
# Driver specific image creation options for NFS.
#
-# @location Where to store the new image file
-# @size Size of the virtual disk in bytes
+# @location: Where to store the new image file
+# @size: Size of the virtual disk in bytes
#
# Since: 2.12
##
@@ -4338,9 +4338,9 @@
#
# Driver specific image creation options for parallels.
#
-# @file Node to create the image format on
-# @size Size of the virtual disk in bytes
-# @cluster-size Cluster size in bytes (default: 1 MB)
+# @file: Node to create the image format on
+# @size: Size of the virtual disk in bytes
+# @cluster-size: Cluster size in bytes (default: 1 MB)
#
# Since: 2.12
##
@@ -4354,11 +4354,11 @@
#
# Driver specific image creation options for qcow.
#
-# @file Node to create the image format on
-# @size Size of the virtual disk in bytes
-# @backing-file File name of the backing file if a backing file
-# should be used
-# @encrypt Encryption options if the image should be encrypted
+# @file: Node to create the image format on
+# @size: Size of the virtual disk in bytes
+# @backing-file: File name of the backing file if a backing file
+# should be used
+# @encrypt: Encryption options if the image should be encrypted
#
# Since: 2.12
##
@@ -4385,24 +4385,24 @@
#
# Driver specific image creation options for qcow2.
#
-# @file Node to create the image format on
-# @data-file Node to use as an external data file in which all guest
-# data is stored so that only metadata remains in the qcow2
-# file (since: 4.0)
-# @data-file-raw True if the external data file must stay valid as a
-# standalone (read-only) raw image without looking at qcow2
-# metadata (default: false; since: 4.0)
-# @size Size of the virtual disk in bytes
-# @version Compatibility level (default: v3)
-# @backing-file File name of the backing file if a backing file
-# should be used
-# @backing-fmt Name of the block driver to use for the backing file
-# @encrypt Encryption options if the image should be encrypted
-# @cluster-size qcow2 cluster size in bytes (default: 65536)
-# @preallocation Preallocation mode for the new image (default: off;
-# allowed values: off, falloc, full, metadata)
-# @lazy-refcounts True if refcounts may be updated lazily (default: off)
-# @refcount-bits Width of reference counts in bits (default: 16)
+# @file: Node to create the image format on
+# @data-file: Node to use as an external data file in which all guest
+# data is stored so that only metadata remains in the qcow2
+# file (since: 4.0)
+# @data-file-raw: True if the external data file must stay valid as a
+# standalone (read-only) raw image without looking at qcow2
+# metadata (default: false; since: 4.0)
+# @size: Size of the virtual disk in bytes
+# @version: Compatibility level (default: v3)
+# @backing-file: File name of the backing file if a backing file
+# should be used
+# @backing-fmt: Name of the block driver to use for the backing file
+# @encrypt: Encryption options if the image should be encrypted
+# @cluster-size: qcow2 cluster size in bytes (default: 65536)
+# @preallocation: Preallocation mode for the new image (default: off;
+# allowed values: off, falloc, full, metadata)
+# @lazy-refcounts: True if refcounts may be updated lazily (default: off)
+# @refcount-bits: Width of reference counts in bits (default: 16)
#
# Since: 2.12
##
@@ -4425,13 +4425,13 @@
#
# Driver specific image creation options for qed.
#
-# @file Node to create the image format on
-# @size Size of the virtual disk in bytes
-# @backing-file File name of the backing file if a backing file
-# should be used
-# @backing-fmt Name of the block driver to use for the backing file
-# @cluster-size Cluster size in bytes (default: 65536)
-# @table-size L1/L2 table size (in clusters)
+# @file: Node to create the image format on
+# @size: Size of the virtual disk in bytes
+# @backing-file: File name of the backing file if a backing file
+# should be used
+# @backing-fmt: Name of the block driver to use for the backing file
+# @cluster-size: Cluster size in bytes (default: 65536)
+# @table-size: L1/L2 table size (in clusters)
#
# Since: 2.12
##
@@ -4448,10 +4448,10 @@
#
# Driver specific image creation options for rbd/Ceph.
#
-# @location Where to store the new image file. This location cannot
-# point to a snapshot.
-# @size Size of the virtual disk in bytes
-# @cluster-size RBD object size
+# @location: Where to store the new image file. This location cannot
+# point to a snapshot.
+# @size: Size of the virtual disk in bytes
+# @cluster-size: RBD object size
#
# Since: 2.12
##
@@ -4499,23 +4499,23 @@
#
# Driver specific image creation options for VMDK.
#
-# @file Where to store the new image file. This refers to the image
-# file for monolithcSparse and streamOptimized format, or the
-# descriptor file for other formats.
-# @size Size of the virtual disk in bytes
-# @extents Where to store the data extents. Required for monolithcFlat,
-# twoGbMaxExtentSparse and twoGbMaxExtentFlat formats. For
-# monolithicFlat, only one entry is required; for
-# twoGbMaxExtent* formats, the number of entries required is
-# calculated as extent_number = virtual_size / 2GB. Providing
-# more extents than will be used is an error.
-# @subformat The subformat of the VMDK image. Default: "monolithicSparse".
-# @backing-file The path of backing file. Default: no backing file is used.
-# @adapter-type The adapter type used to fill in the descriptor. Default: ide.
-# @hwversion Hardware version. The meaningful options are "4" or "6".
-# Default: "4".
-# @zeroed-grain Whether to enable zeroed-grain feature for sparse subformats.
-# Default: false.
+# @file: Where to store the new image file. This refers to the image
+# file for monolithcSparse and streamOptimized format, or the
+# descriptor file for other formats.
+# @size: Size of the virtual disk in bytes
+# @extents: Where to store the data extents. Required for monolithcFlat,
+# twoGbMaxExtentSparse and twoGbMaxExtentFlat formats. For
+# monolithicFlat, only one entry is required; for
+# twoGbMaxExtent* formats, the number of entries required is
+# calculated as extent_number = virtual_size / 2GB. Providing
+# more extents than will be used is an error.
+# @subformat: The subformat of the VMDK image. Default: "monolithicSparse".
+# @backing-file: The path of backing file. Default: no backing file is used.
+# @adapter-type: The adapter type used to fill in the descriptor. Default: ide.
+# @hwversion: Hardware version. The meaningful options are "4" or "6".
+# Default: "4".
+# @zeroed-grain: Whether to enable zeroed-grain feature for sparse subformats.
+# Default: false.
#
# Since: 4.0
##
@@ -4533,9 +4533,9 @@
##
# @SheepdogRedundancyType:
#
-# @full Create a fully replicated vdi with x copies
-# @erasure-coded Create an erasure coded vdi with x data strips and
-# y parity strips
+# @full: Create a fully replicated vdi with x copies
+# @erasure-coded: Create an erasure coded vdi with x data strips and
+# y parity strips
#
# Since: 2.12
##
@@ -4545,7 +4545,7 @@
##
# @SheepdogRedundancyFull:
#
-# @copies Number of copies to use (between 1 and 31)
+# @copies: Number of copies to use (between 1 and 31)
#
# Since: 2.12
##
@@ -4555,8 +4555,8 @@
##
# @SheepdogRedundancyErasureCoded:
#
-# @data-strips Number of data strips to use (one of {2,4,8,16})
-# @parity-strips Number of parity strips to use (between 1 and 15)
+# @data-strips: Number of data strips to use (one of {2,4,8,16})
+# @parity-strips: Number of parity strips to use (between 1 and 15)
#
# Since: 2.12
##
@@ -4580,13 +4580,13 @@
#
# Driver specific image creation options for Sheepdog.
#
-# @location Where to store the new image file
-# @size Size of the virtual disk in bytes
-# @backing-file File name of a base image
-# @preallocation Preallocation mode for the new image (default: off;
-# allowed values: off, full)
-# @redundancy Redundancy of the image
-# @object-size Object size of the image
+# @location: Where to store the new image file
+# @size: Size of the virtual disk in bytes
+# @backing-file: File name of a base image
+# @preallocation: Preallocation mode for the new image (default: off;
+# allowed values: off, full)
+# @redundancy: Redundancy of the image
+# @object-size: Object size of the image
#
# Since: 2.12
##
@@ -4603,8 +4603,8 @@
#
# Driver specific image creation options for SSH.
#
-# @location Where to store the new image file
-# @size Size of the virtual disk in bytes
+# @location: Where to store the new image file
+# @size: Size of the virtual disk in bytes
#
# Since: 2.12
##
@@ -4617,10 +4617,10 @@
#
# Driver specific image creation options for VDI.
#
-# @file Node to create the image format on
-# @size Size of the virtual disk in bytes
-# @preallocation Preallocation mode for the new image (default: off;
-# allowed values: off, metadata)
+# @file: Node to create the image format on
+# @size: Size of the virtual disk in bytes
+# @preallocation: Preallocation mode for the new image (default: off;
+# allowed values: off, metadata)
#
# Since: 2.12
##
@@ -4645,17 +4645,17 @@
#
# Driver specific image creation options for vhdx.
#
-# @file Node to create the image format on
-# @size Size of the virtual disk in bytes
-# @log-size Log size in bytes, must be a multiple of 1 MB
-# (default: 1 MB)
-# @block-size Block size in bytes, must be a multiple of 1 MB and not
-# larger than 256 MB (default: automatically choose a block
-# size depending on the image size)
-# @subformat vhdx subformat (default: dynamic)
-# @block-state-zero Force use of payload blocks of type 'ZERO'. Non-standard,
-# but default. Do not set to 'off' when using 'qemu-img
-# convert' with subformat=dynamic.
+# @file: Node to create the image format on
+# @size: Size of the virtual disk in bytes
+# @log-size: Log size in bytes, must be a multiple of 1 MB
+# (default: 1 MB)
+# @block-size: Block size in bytes, must be a multiple of 1 MB and not
+# larger than 256 MB (default: automatically choose a block
+# size depending on the image size)
+# @subformat: vhdx subformat (default: dynamic)
+# @block-state-zero: Force use of payload blocks of type 'ZERO'. Non-standard,
+# but default. Do not set to 'off' when using 'qemu-img
+# convert' with subformat=dynamic.
#
# Since: 2.12
##
@@ -4683,12 +4683,12 @@
#
# Driver specific image creation options for vpc (VHD).
#
-# @file Node to create the image format on
-# @size Size of the virtual disk in bytes
-# @subformat vhdx subformat (default: dynamic)
-# @force-size Force use of the exact byte size instead of rounding to the
-# next size that can be represented in CHS geometry
-# (default: false)
+# @file: Node to create the image format on
+# @size: Size of the virtual disk in bytes
+# @subformat: vhdx subformat (default: dynamic)
+# @force-size: Force use of the exact byte size instead of rounding to the
+# next size that can be represented in CHS geometry
+# (default: false)
#
# Since: 2.12
##
@@ -4703,7 +4703,7 @@
#
# Options for creating an image format on a given node.
#
-# @driver block driver to create the image format
+# @driver: block driver to create the image format
#
# Since: 2.12
##