diff mbox series

[RFC,2/3] spi: HiSilicon v3xx: Properly set CMD_CONFIG for Dual/Quad modes

Message ID 1582903131-160033-3-git-send-email-john.garry@huawei.com
State New
Headers show
Series spi/HiSilicon v3xx: Support dual and quad mode through DMI quirks | expand

Commit Message

John Garry Feb. 28, 2020, 3:18 p.m. UTC
The CMD_CONFIG register memory interface type field is not set configured
for Dual and Quad modes, so set appropriately.

This was not detected previously as we only ever operated in standard SPI
mode.

Signed-off-by: John Garry <john.garry@huawei.com>

---
 drivers/spi/spi-hisi-sfc-v3xx.c | 43 +++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c
index 4cf8fc80a7b7..45d906110ed1 100644
--- a/drivers/spi/spi-hisi-sfc-v3xx.c
+++ b/drivers/spi/spi-hisi-sfc-v3xx.c
@@ -17,6 +17,12 @@ 
 #define HISI_SFC_V3XX_VERSION (0x1f8)
 
 #define HISI_SFC_V3XX_CMD_CFG (0x300)
+#define HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT (1 << 17)
+#define HISI_SFC_V3XX_CMD_CFG_DUAL_IO (2 << 17)
+#define HISI_SFC_V3XX_CMD_CFG_FULL_DIO (3 << 17)
+#define HISI_SFC_V3XX_CMD_CFG_QUAD_IN_QUAD_OUT (5 << 17)
+#define HISI_SFC_V3XX_CMD_CFG_QUAD_IO (6 << 17)
+#define HISI_SFC_V3XX_CMD_CFG_FULL_QIO (7 << 17)
 #define HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF 9
 #define HISI_SFC_V3XX_CMD_CFG_RW_MSK BIT(8)
 #define HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK BIT(7)
@@ -161,6 +167,43 @@  static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 	if (op->addr.nbytes)
 		config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK;
 
+	switch (op->data.buswidth) {
+	case 0 ... 1:
+		break;
+	case 2:
+		if (op->addr.buswidth <= 1) {
+			config |= HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT;
+		} else if (op->addr.buswidth == 2) {
+			if (op->cmd.buswidth <= 1) {
+				config |= HISI_SFC_V3XX_CMD_CFG_DUAL_IO;
+			} else if (op->cmd.buswidth == 2) {
+				config |= HISI_SFC_V3XX_CMD_CFG_FULL_DIO;
+			} else {
+				return -EIO;
+			}
+		} else {
+			return -EIO;
+		}
+		break;
+	case 4:
+		if (op->addr.buswidth <= 1) {
+			config |= HISI_SFC_V3XX_CMD_CFG_QUAD_IN_QUAD_OUT;
+		} else if (op->addr.buswidth == 4) {
+			if (op->cmd.buswidth <= 1) {
+				config |= HISI_SFC_V3XX_CMD_CFG_QUAD_IO;
+			} else if (op->cmd.buswidth == 4) {
+				config |= HISI_SFC_V3XX_CMD_CFG_FULL_QIO;
+			} else {
+				return -EIO;
+			}
+		} else {
+			return -EIO;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
 	if (op->data.dir != SPI_MEM_NO_DATA) {
 		config |= (len - 1) << HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF;
 		config |= HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK;