@@ -242,6 +242,7 @@ static char *maptype(struct mmc_command *cmd)
static int mmc_spi_response_get(struct mmc_spi_host *host,
struct mmc_command *cmd, int cs_on)
{
+ unsigned long timeout_ms;
u8 *cp = host->data->status;
u8 *end = cp + host->t.len;
int value = 0;
@@ -340,9 +341,11 @@ static int mmc_spi_response_get(struct mmc_spi_host *host,
/* maybe we read all the busy tokens already */
while (cp < end && *cp == 0)
cp++;
- if (cp == end)
- mmc_spi_wait_unbusy(host,
- msecs_to_jiffies(MMC_SPI_R1B_TIMEOUT_MS));
+ if (cp == end) {
+ timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+ MMC_SPI_R1B_TIMEOUT_MS;
+ mmc_spi_wait_unbusy(host, msecs_to_jiffies(timeout_ms));
+ }
break;
/* SPI R2 == R1 + second status byte; SEND_STATUS
Using a fixed 3s polling timeout for all commands with R1B responses is a bit problematic. For some commands it means waiting longer than needed for the polling to be aborted, which may not a big issue, but still. For other commands, like for an erase (CMD38), may require longer timeouts than 3s. In these cases, we may end up treating the command as it failed, while it just needed some more time to complete successfully. Fix the problem by respecting the cmd->busy_timeout, which is provided by the mmc core. Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/mmc/host/mmc_spi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) -- 2.20.1