Message ID | 1590399072-32407-1-git-send-email-zijuhu@codeaurora.org |
---|---|
State | New |
Headers | show |
Series | [v1] bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot | expand |
Hi Zijun, > Warm reboot can not restore qca6390 controller baudrate > to default due to lack of controllable BT_EN pin or power > supply, so fails to download firmware after warm reboot. > > Fixed by sending EDL_SOC_RESET VSC to reset controller > within added device shutdown implementation. > > Signed-off-by: Zijun Hu <zijuhu@codeaurora.org> > --- > drivers/bluetooth/btqca.c | 8 ++++---- > drivers/bluetooth/hci_qca.c | 27 +++++++++++++++++++++++++++ > 2 files changed, 31 insertions(+), 4 deletions(-) > > diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c > index 3ea866d..7bbdf4d 100644 > --- a/drivers/bluetooth/btqca.c > +++ b/drivers/bluetooth/btqca.c > @@ -74,10 +74,10 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version, > > ver = (struct qca_btsoc_version *)(edl->data); > > - BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id)); > - BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver)); > - BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rom_ver)); > - BT_DBG("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id)); > + BT_INFO("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id)); > + BT_INFO("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver)); > + BT_INFO("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rom_ver)); > + BT_INFO("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id)); if you do this then switch to bt_dew_info() please. However it should be a separate patch since it has nothing to do with what you are fixing. > > /* QCA chipset version can be decided by patch and SoC > * version, combination with upper 2 bytes from SoC > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c > index e4a6823..a4f86e4 100644 > --- a/drivers/bluetooth/hci_qca.c > +++ b/drivers/bluetooth/hci_qca.c > @@ -1975,6 +1975,32 @@ static void qca_serdev_remove(struct serdev_device *serdev) > hci_uart_unregister_device(&qcadev->serdev_hu); > } > > +static void qca_serdev_shutdown(struct device *dev) > +{ > + int res; > + int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS); > + struct serdev_device *serdev = to_serdev_device(dev); > + struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev); > + u8 ibs_wake_cmd[] = {0xfd}; > + u8 edl_reset_soc_cmd[] = {0x01, 0x00, 0xfc, 0x01, 0x05}; { 0xAB, 0x12 } please. And these can be const. > + > + if (qcadev->btsoc_type == QCA_QCA6390) { > + serdev_device_write_flush(serdev); > + res = serdev_device_write_buf(serdev, > + ibs_wake_cmd, sizeof(ibs_wake_cmd)); > + BT_INFO("%s: send ibs_wake_cmd res = %d", __func__, res); We are not printing __func__ with BT_INFO. Use BT_DBG here. > + serdev_device_wait_until_sent(serdev, timeout); > + usleep_range(8000, 10000); > + > + serdev_device_write_flush(serdev); > + res = serdev_device_write_buf(serdev, > + edl_reset_soc_cmd, sizeof(edl_reset_soc_cmd)); > + BT_INFO("%s: send edl_reset_soc_cmd res = %d", __func__, res); > + serdev_device_wait_until_sent(serdev, timeout); > + usleep_range(8000, 10000); > + } > +} > + > static int __maybe_unused qca_suspend(struct device *dev) > { > struct hci_dev *hdev = container_of(dev, struct hci_dev, dev); > @@ -2100,6 +2126,7 @@ static struct serdev_device_driver qca_serdev_driver = { > .name = "hci_uart_qca", > .of_match_table = of_match_ptr(qca_bluetooth_of_match), > .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match), > + .shutdown = qca_serdev_shutdown, > .pm = &qca_pm_ops, > }, > }; Regards Marcel
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 3ea866d..7bbdf4d 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -74,10 +74,10 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version, ver = (struct qca_btsoc_version *)(edl->data); - BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id)); - BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver)); - BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rom_ver)); - BT_DBG("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id)); + BT_INFO("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id)); + BT_INFO("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver)); + BT_INFO("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rom_ver)); + BT_INFO("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id)); /* QCA chipset version can be decided by patch and SoC * version, combination with upper 2 bytes from SoC diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index e4a6823..a4f86e4 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1975,6 +1975,32 @@ static void qca_serdev_remove(struct serdev_device *serdev) hci_uart_unregister_device(&qcadev->serdev_hu); } +static void qca_serdev_shutdown(struct device *dev) +{ + int res; + int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS); + struct serdev_device *serdev = to_serdev_device(dev); + struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev); + u8 ibs_wake_cmd[] = {0xfd}; + u8 edl_reset_soc_cmd[] = {0x01, 0x00, 0xfc, 0x01, 0x05}; + + if (qcadev->btsoc_type == QCA_QCA6390) { + serdev_device_write_flush(serdev); + res = serdev_device_write_buf(serdev, + ibs_wake_cmd, sizeof(ibs_wake_cmd)); + BT_INFO("%s: send ibs_wake_cmd res = %d", __func__, res); + serdev_device_wait_until_sent(serdev, timeout); + usleep_range(8000, 10000); + + serdev_device_write_flush(serdev); + res = serdev_device_write_buf(serdev, + edl_reset_soc_cmd, sizeof(edl_reset_soc_cmd)); + BT_INFO("%s: send edl_reset_soc_cmd res = %d", __func__, res); + serdev_device_wait_until_sent(serdev, timeout); + usleep_range(8000, 10000); + } +} + static int __maybe_unused qca_suspend(struct device *dev) { struct hci_dev *hdev = container_of(dev, struct hci_dev, dev); @@ -2100,6 +2126,7 @@ static struct serdev_device_driver qca_serdev_driver = { .name = "hci_uart_qca", .of_match_table = of_match_ptr(qca_bluetooth_of_match), .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match), + .shutdown = qca_serdev_shutdown, .pm = &qca_pm_ops, }, };
Warm reboot can not restore qca6390 controller baudrate to default due to lack of controllable BT_EN pin or power supply, so fails to download firmware after warm reboot. Fixed by sending EDL_SOC_RESET VSC to reset controller within added device shutdown implementation. Signed-off-by: Zijun Hu <zijuhu@codeaurora.org> --- drivers/bluetooth/btqca.c | 8 ++++---- drivers/bluetooth/hci_qca.c | 27 +++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 4 deletions(-)