diff mbox series

[net-next,v5,3/3] ARM: dts: qcom: ipq4019: add MDIO node

Message ID 20200430090707.24810-4-robert.marko@sartura.hr
State New
Headers show
Series [net-next,v5,1/3] net: phy: mdio: add IPQ4019 MDIO driver | expand

Commit Message

Robert Marko April 30, 2020, 9:07 a.m. UTC 
This patch adds the necessary MDIO interface node
to the Qualcomm IPQ4019 DTSI.

Built-in QCA8337N switch is managed using it,
and since we have a driver for it lets add it.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
Changes from v4 to v5:
* Rebase to apply on net-next

Changes from v3 to v4:
* Change compatible to IPQ4019

Changes from v2 to v3:
* Correct commit title

 arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index bfa9ce4c6e69..b9839f86e703 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -576,5 +576,33 @@  wifi1: wifi@a800000 {
 					  "legacy";
 			status = "disabled";
 		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq4019-mdio";
+			reg = <0x90000 0x64>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethphy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };