@@ -262,23 +262,6 @@ static u32 mdrefr_dri(unsigned int freq)
return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
}
-/* find a valid frequency point */
-static int pxa_verify_policy(struct cpufreq_policy *policy)
-{
- struct cpufreq_frequency_table *pxa_freqs_table;
- pxa_freqs_t *pxa_freqs;
- int ret;
-
- find_freq_tables(&pxa_freqs_table, &pxa_freqs);
- ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
-
- if (freq_debug)
- pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
- policy->min, policy->max);
-
- return ret;
-}
-
static unsigned int pxa_cpufreq_get(unsigned int cpu)
{
return get_clk_frequency_khz(0);
@@ -465,16 +448,11 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
return 0;
}
-static int pxa_cpufreq_exit(struct cpufreq_policy *policy)
-{
- cpufreq_frequency_table_put_attr(policy->cpu);
-}
-
static struct cpufreq_driver pxa_cpufreq_driver = {
- .verify = pxa_verify_policy,
+ .verify = cpufreq_generic_frequency_table_verify,
.target = pxa_set_target,
.init = pxa_cpufreq_init,
- .exit = pxa_cpufreq_exit,
+ .exit = cpufreq_generic_exit,
.get = pxa_cpufreq_get,
.name = "PXA2xx",
};
@@ -150,11 +150,6 @@ static void __update_bus_freq(struct pxa3xx_freq_info *info)
cpu_relax();
}
-static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
-{
- return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
-}
-
static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
{
return pxa3xx_get_clk_frequency_khz(0);
@@ -227,16 +222,11 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
return 0;
}
-static int pxa3xx_cpufreq_exit(struct cpufreq_policy *policy)
-{
- cpufreq_frequency_table_put_attr(policy->cpu);
-}
-
static struct cpufreq_driver pxa3xx_cpufreq_driver = {
- .verify = pxa3xx_cpufreq_verify,
+ .verify = cpufreq_generic_frequency_table_verify,
.target = pxa3xx_cpufreq_set,
.init = pxa3xx_cpufreq_init,
- .exit = pxa3xx_cpufreq_exit,
+ .exit = cpufreq_generic_exit,
.get = pxa3xx_cpufreq_get,
.name = "pxa3xx-cpufreq",
};
Most of the CPUFreq drivers do similar things in .exit() and .verify() routines and .attr. So its better if we have generic routines for them which can be used by cpufreq drivers then. This patch uses these generic routines for this driver. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/cpufreq/pxa2xx-cpufreq.c | 26 ++------------------------ drivers/cpufreq/pxa3xx-cpufreq.c | 14 ++------------ 2 files changed, 4 insertions(+), 36 deletions(-)