diff mbox

ARM: OMAP2+ i2c NACK without STP

Message ID 1308048853-21911-1-git-send-email-j.weitzel@phytec.de
State Accepted
Commit bc1ff2bdfe6681dd2aed4ebef63e1e55c41b8742
Headers show

Commit Message

Jan Weitzel June 14, 2011, 10:54 a.m. UTC 
On OMAP4 OMAP_I2C_STAT_NACK is causing a timeout on the next access.
The isr cleans all flags in OMAP_I2C_CON_REG by setting OMAP_I2C_CON_STP
OMAP_I2C_CON_STP is also set in omap_i2c_xfer_msg on the last message.

According to the TI TSR the sequence for OMAP_I2C_STAT_NACK and
OMAP_I2C_STAT_AL are nearly the same.
Removing the OMAP_I2C_CON_STP part in the isr fix the problem.
Tested on OMAP4430 and OMAP3530 (here NACK was not a problem)
Fixes also booting on 2430sdp.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/i2c/busses/i2c-omap.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 58a58c7..670f2a2 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -836,11 +836,9 @@  complete:
 				~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
 				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
 
-		if (stat & OMAP_I2C_STAT_NACK) {
+		if (stat & OMAP_I2C_STAT_NACK)
 			err |= OMAP_I2C_STAT_NACK;
-			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
-					   OMAP_I2C_CON_STP);
-		}
+
 		if (stat & OMAP_I2C_STAT_AL) {
 			dev_err(dev->dev, "Arbitration lost\n");
 			err |= OMAP_I2C_STAT_AL;