@@ -1562,9 +1562,11 @@ static int qca_power_on(struct hci_dev *hdev)
ret = qca_wcn3990_init(hu);
} else {
qcadev = serdev_device_get_drvdata(hu->serdev);
- gpiod_set_value_cansleep(qcadev->bt_en, 1);
- /* Controller needs time to bootup. */
- msleep(150);
+ if (!IS_ERR(qcadev->bt_en)) {
+ gpiod_set_value_cansleep(qcadev->bt_en, 1);
+ /* Controller needs time to bootup. */
+ msleep(150);
+ }
}
return ret;
@@ -1750,7 +1752,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
qca_regulator_disable(qcadev);
- } else {
+ } else if (!IS_ERR(qcadev->bt_en)) {
gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
}
@@ -1852,6 +1854,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
struct hci_dev *hdev;
const struct qca_vreg_data *data;
int err;
+ bool power_ctrl_enabled = true;
qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
if (!qcadev)
@@ -1901,35 +1904,37 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(qcadev->bt_en)) {
- dev_err(&serdev->dev, "failed to acquire enable gpio\n");
- return PTR_ERR(qcadev->bt_en);
+ dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
+ power_ctrl_enabled = false;
}
qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
- dev_err(&serdev->dev, "failed to acquire clk\n");
- return PTR_ERR(qcadev->susclk);
- }
-
- err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
- if (err)
- return err;
+ dev_warn(&serdev->dev, "failed to acquire clk\n");
+ } else {
+ err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
+ if (err)
+ return err;
- err = clk_prepare_enable(qcadev->susclk);
- if (err)
- return err;
+ err = clk_prepare_enable(qcadev->susclk);
+ if (err)
+ return err;
+ }
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err) {
BT_ERR("Rome serdev registration failed");
- clk_disable_unprepare(qcadev->susclk);
+ if (!IS_ERR(qcadev->susclk))
+ clk_disable_unprepare(qcadev->susclk);
return err;
}
}
- hdev = qcadev->serdev_hu.hdev;
- set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
- hdev->shutdown = qca_power_off;
+ if (power_ctrl_enabled) {
+ hdev = qcadev->serdev_hu.hdev;
+ set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ hdev->shutdown = qca_power_off;
+ }
return 0;
}
@@ -1940,7 +1945,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
if (qca_is_wcn399x(qcadev->btsoc_type))
qca_power_shutdown(&qcadev->serdev_hu);
- else
+ else if (!IS_ERR(qcadev->susclk))
clk_disable_unprepare(qcadev->susclk);
hci_uart_unregister_device(&qcadev->serdev_hu);
On some platforms the bt_en pin and susclk are default on and there is no exposed resource to control them. This patch makes the bt_en and susclk not mandatory to have BT work. It also will not set the HCI_QUIRK_NON_PERSISTENT_SETUP and shutdown() callback if bt_en is not available. Signed-off-by: Rocky Liao <rjliao@codeaurora.org> --- drivers/bluetooth/hci_qca.c | 47 ++++++++++++++++++++----------------- 1 file changed, 26 insertions(+), 21 deletions(-)