@@ -1109,6 +1109,12 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
}
if (dpu_enc->cur_master->hw_mdptop &&
+ (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_TMDS) &&
+ dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select)
+ dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select(
+ dpu_enc->cur_master->hw_mdptop);
+
+ if (dpu_enc->cur_master->hw_mdptop &&
dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc)
dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc(
dpu_enc->cur_master->hw_mdptop,
@@ -109,8 +109,9 @@
{
.name = "top_0", .id = MDP_TOP,
.base = 0x0, .len = 0x494,
- .features = 0,
+ .features = BIT(DPU_MDP_DP_PHY_SEL),
.highest_bank_bit = 0x3,
+ .dp_phy_intf_sel = 0x41,
.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
.reg_off = 0x2AC, .bit_off = 0},
.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
@@ -77,6 +77,7 @@ enum {
* @DPU_MDP_UBWC_1_0, This chipsets supports Universal Bandwidth
* compression initial revision
* @DPU_MDP_UBWC_1_5, Universal Bandwidth compression version 1.5
+ * @DPU_MDP_DP_PHY_SEL DP PHY interface select for controller
* @DPU_MDP_MAX Maximum value
*/
@@ -86,6 +87,7 @@ enum {
DPU_MDP_BWC,
DPU_MDP_UBWC_1_0,
DPU_MDP_UBWC_1_5,
+ DPU_MDP_DP_PHY_SEL,
DPU_MDP_MAX
};
@@ -421,6 +423,7 @@ struct dpu_clk_ctrl_reg {
* @highest_bank_bit: UBWC parameter
* @ubwc_static: ubwc static configuration
* @ubwc_swizzle: ubwc default swizzle setting
+ * @dp_phy_intf_sel: dp phy interface select for controller
* @clk_ctrls clock control register definition
*/
struct dpu_mdp_cfg {
@@ -428,6 +431,7 @@ struct dpu_mdp_cfg {
u32 highest_bank_bit;
u32 ubwc_static;
u32 ubwc_swizzle;
+ u32 dp_phy_intf_sel;
struct dpu_clk_ctrl_reg clk_ctrls[DPU_CLK_CTRL_MAX];
};
@@ -144,10 +144,22 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
display_hctl = (hsync_end_x << 16) | hsync_start_x;
+ if (ctx->cap->type == INTF_DP) {
+ active_h_start = hsync_start_x;
+ active_h_end = active_h_start + p->xres - 1;
+ active_v_start = display_v_start;
+ active_v_end = active_v_start + (p->yres * hsync_period) - 1;
+ active_hctl = (active_h_end << 16) | active_h_start;
+ display_hctl = active_hctl;
+ }
+
den_polarity = 0;
if (ctx->cap->type == INTF_HDMI) {
hsync_polarity = p->yres >= 720 ? 0 : 1;
vsync_polarity = p->yres >= 720 ? 0 : 1;
+ } else if (ctx->cap->type == INTF_DP) {
+ hsync_polarity = p->hsync_polarity;
+ vsync_polarity = p->vsync_polarity;
} else {
hsync_polarity = 0;
vsync_polarity = 0;
@@ -41,6 +41,7 @@
#define MDP_WD_TIMER_4_CTL 0x440
#define MDP_WD_TIMER_4_CTL2 0x444
#define MDP_WD_TIMER_4_LOAD_VALUE 0x448
+#define DP_PHY_INTF_SEL 0x460
#define MDP_TICK_COUNT 16
#define XO_CLK_RATE 19200
@@ -275,6 +276,9 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
c = &mdp->hw;
DPU_REG_WRITE(c, HDMI_DP_CORE_SELECT, 0x1);
+
+ if (mdp->caps->features & BIT(DPU_MDP_DP_PHY_SEL))
+ DPU_REG_WRITE(c, DP_PHY_INTF_SEL, mdp->caps->dp_phy_intf_sel);
}
static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
Add the required changes to support Display Port for sc7180 target. Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Changes in v2: - Change in commit message This patch has dependency on the below series https://patchwork.kernel.org/patch/11269169/ --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 6 ++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 ++- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 ++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 12 ++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 4 ++++ 5 files changed, 28 insertions(+), 1 deletion(-)