| Message ID | 20200226114017.1.I15e0f7eff0c67a2b49d4992f9d80fc1d2fdadf63@changeid |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: sc7180: Move venus node to the correct position | expand |
Hi, On Wed, Feb 26, 2020 at 11:40 AM Matthias Kaehlcke <mka@chromium.org> wrote: > > Per convention device nodes for SC7180 should be ordered by address. > This is currently not the case for the venus node, move it to the > correct position. > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org> > --- > > arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++-------------- > 1 file changed, 26 insertions(+), 26 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index 253274d5f04c..5f97945e16a4 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -1332,6 +1332,32 @@ system-cache-controller@9200000 { > interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; > }; > > + venus: video-codec@aa00000 { > + compatible = "qcom,sc7180-venus"; > + reg = <0 0x0aa00000 0 0xff000>; > + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&videocc VENUS_GDSC>, > + <&videocc VCODEC0_GDSC>; > + power-domain-names = "venus", "vcodec0"; > + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, > + <&videocc VIDEO_CC_VENUS_AHB_CLK>, > + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, > + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, > + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; > + clock-names = "core", "iface", "bus", > + "vcodec0_core", "vcodec0_bus"; > + iommus = <&apps_smmu 0x0c00 0x60>; > + memory-region = <&venus_mem>; > + > + video-decoder { > + compatible = "venus-decoder"; > + }; > + > + video-encoder { > + compatible = "venus-encoder"; > + }; > + }; > + > usb_1: usb@a6f8800 { > compatible = "qcom,sc7180-dwc3", "qcom,dwc3"; > reg = <0 0x0a6f8800 0 0x400>; Maybe try one more time? >>> print [hex(x) for x in sorted([0x0aa00000, 0x0a6f8800])] ['0xa6f8800', '0xaa00000'] ...makes me convinced that the codec should come _after_ the USB node, no? -Doug
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 253274d5f04c..5f97945e16a4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1332,6 +1332,32 @@ system-cache-controller@9200000 { interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + venus: video-codec@aa00000 { + compatible = "qcom,sc7180-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>; + power-domain-names = "venus", "vcodec0"; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus"; + iommus = <&apps_smmu 0x0c00 0x60>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sc7180-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -1538,32 +1564,6 @@ dispcc: clock-controller@af00000 { #power-domain-cells = <1>; }; - venus: video-codec@aa00000 { - compatible = "qcom,sc7180-venus"; - reg = <0 0x0aa00000 0 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>; - power-domain-names = "venus", "vcodec0"; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; - clock-names = "core", "iface", "bus", - "vcodec0_core", "vcodec0_bus"; - iommus = <&apps_smmu 0x0c00 0x60>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; - }; - pdc: interrupt-controller@b220000 { compatible = "qcom,sc7180-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>;
Per convention device nodes for SC7180 should be ordered by address. This is currently not the case for the venus node, move it to the correct position. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++-------------- 1 file changed, 26 insertions(+), 26 deletions(-)