| Message ID | 20200224211035.16897-2-ansuelsmth@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
On Mon, Feb 24, 2020 at 10:10:31PM +0100, Ansuel Smith wrote: > Add documentations for ipq806x mdio driver. > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> > --- > Changes in v7: > - Fix dt_binding_check problem > > .../bindings/net/qcom,ipq8064-mdio.yaml | 55 +++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > > diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > new file mode 100644 > index 000000000000..3178cbfdc661 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm ipq806x MDIO bus controller > + > +maintainers: > + - Ansuel Smith <ansuelsmth@gmail.com> > + > +description: |+ > + The ipq806x soc have a MDIO dedicated controller that is > + used to comunicate with the gmac phy conntected. used to communicate with the connected gmac phy. Andrew
On Mon, Feb 24, 2020 at 3:10 PM Ansuel Smith <ansuelsmth@gmail.com> wrote: > typo in the subject. Use 'dt-bindings: net: ...' for the subject prefix. > Add documentations for ipq806x mdio driver. > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> > --- > Changes in v7: > - Fix dt_binding_check problem Um, no you didn't... > > .../bindings/net/qcom,ipq8064-mdio.yaml | 55 +++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > > diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > new file mode 100644 > index 000000000000..3178cbfdc661 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later Dual license new bindings please: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm ipq806x MDIO bus controller > + > +maintainers: > + - Ansuel Smith <ansuelsmth@gmail.com> > + > +description: |+ Don't need '|+' unless you need specific formatting. > + The ipq806x soc have a MDIO dedicated controller that is > + used to comunicate with the gmac phy conntected. > + Child nodes of this MDIO bus controller node are standard > + Ethernet PHY device nodes as described in > + Documentation/devicetree/bindings/net/phy.txt > + > +allOf: > + - $ref: "mdio.yaml#" > + > +properties: > + compatible: > + const: qcom,ipq8064-mdio blank line between properties please. > + reg: > + maxItems: 1 > + description: address and length of the register set for the device That's every 'reg', you can drop this. > + clocks: > + maxItems: 1 > + description: A reference to the clock supplying the MDIO bus controller That's every 'clocks', you can drop this. > + > +required: > + - compatible > + - reg > + - clocks > + - "#address-cells" > + - "#size-cells" > + > +examples: > + - | > + mdio0: mdio@37000000 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + compatible = "qcom,ipq8064-mdio", "syscon"; 'syscon' doesn't match the schema and is wrong. > + reg = <0x37000000 0x200000>; > + resets = <&gcc GMAC_CORE1_RESET>; > + reset-names = "stmmaceth"; Not documented. > + clocks = <&gcc GMAC_CORE1_CLK>; You need to include the header for these defines. > + > + switch@10 { > + compatible = "qca,qca8337"; > + /* ... */ > + }; > + }; > -- > 2.25.0 >
> On Mon, Feb 24, 2020 at 3:10 PM Ansuel Smith <ansuelsmth@gmail.com> > wrote: > > > > typo in the subject. Use 'dt-bindings: net: ...' for the subject prefix. > > > Add documentations for ipq806x mdio driver. > > > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> > > --- > > Changes in v7: > > - Fix dt_binding_check problem > > Um, no you didn't... > Does make dt_check_binding still gives errors? If yes can you give me some advice on how to test only this since it gives me errors on checking other upstream Documentation ? I will fix the other problem in v8. Sorry for the mess and thanks. > > > > .../bindings/net/qcom,ipq8064-mdio.yaml | 55 > +++++++++++++++++++ > > 1 file changed, 55 insertions(+) > > create mode 100644 > Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > > > > diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064- > mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064- > mdio.yaml > > new file mode 100644 > > index 000000000000..3178cbfdc661 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064- > mdio.yaml > > @@ -0,0 +1,55 @@ > > +# SPDX-License-Identifier: GPL-2.0-or-later > > Dual license new bindings please: > > (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm ipq806x MDIO bus controller > > + > > +maintainers: > > + - Ansuel Smith <ansuelsmth@gmail.com> > > + > > +description: |+ > > Don't need '|+' unless you need specific formatting. > > > + The ipq806x soc have a MDIO dedicated controller that is > > + used to comunicate with the gmac phy conntected. > > + Child nodes of this MDIO bus controller node are standard > > + Ethernet PHY device nodes as described in > > + Documentation/devicetree/bindings/net/phy.txt > > + > > +allOf: > > + - $ref: "mdio.yaml#" > > + > > +properties: > > + compatible: > > + const: qcom,ipq8064-mdio > > blank line between properties please. > > > + reg: > > + maxItems: 1 > > + description: address and length of the register set for the device > > That's every 'reg', you can drop this. > > > + clocks: > > + maxItems: 1 > > + description: A reference to the clock supplying the MDIO bus > controller > > That's every 'clocks', you can drop this. > > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - "#address-cells" > > + - "#size-cells" > > + > > +examples: > > + - | > > + mdio0: mdio@37000000 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + compatible = "qcom,ipq8064-mdio", "syscon"; > > 'syscon' doesn't match the schema and is wrong. > > > + reg = <0x37000000 0x200000>; > > > + resets = <&gcc GMAC_CORE1_RESET>; > > + reset-names = "stmmaceth"; > > Not documented. > > > + clocks = <&gcc GMAC_CORE1_CLK>; > > You need to include the header for these defines. > > > + > > + switch@10 { > > + compatible = "qca,qca8337"; > > + /* ... */ > > + }; > > + }; > > -- > > 2.25.0 > >
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml new file mode 100644 index 000000000000..3178cbfdc661 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ipq806x MDIO bus controller + +maintainers: + - Ansuel Smith <ansuelsmth@gmail.com> + +description: |+ + The ipq806x soc have a MDIO dedicated controller that is + used to comunicate with the gmac phy conntected. + Child nodes of this MDIO bus controller node are standard + Ethernet PHY device nodes as described in + Documentation/devicetree/bindings/net/phy.txt + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + const: qcom,ipq8064-mdio + reg: + maxItems: 1 + description: address and length of the register set for the device + clocks: + maxItems: 1 + description: A reference to the clock supplying the MDIO bus controller + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + +examples: + - | + mdio0: mdio@37000000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qcom,ipq8064-mdio", "syscon"; + reg = <0x37000000 0x200000>; + resets = <&gcc GMAC_CORE1_RESET>; + reset-names = "stmmaceth"; + clocks = <&gcc GMAC_CORE1_CLK>; + + switch@10 { + compatible = "qca,qca8337"; + /* ... */ + }; + };
Add documentations for ipq806x mdio driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- Changes in v7: - Fix dt_binding_check problem .../bindings/net/qcom,ipq8064-mdio.yaml | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml