diff mbox series

watchdog: qcom-wdt: disable pretimeout on timer platform

Message ID 20200204184322.22744-1-ansuelsmth@gmail.com
State New
Headers show
Series watchdog: qcom-wdt: disable pretimeout on timer platform | expand

Commit Message

Christian Marangi Feb. 4, 2020, 6:43 p.m. UTC
Some platform like ipq806x doesn't support pretimeout and define
some interrupts used by qcom,msm-timer. Change the driver to check
and use pretimeout only on qcom,kpss-wdt as it's the only platform
that actually supports it.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/watchdog/qcom-wdt.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

Comments

Guenter Roeck Feb. 4, 2020, 7:32 p.m. UTC | #1
On Tue, Feb 04, 2020 at 07:43:22PM +0100, Ansuel Smith wrote:
> Some platform like ipq806x doesn't support pretimeout and define
> some interrupts used by qcom,msm-timer. Change the driver to check
> and use pretimeout only on qcom,kpss-wdt as it's the only platform
> that actually supports it.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/watchdog/qcom-wdt.c | 31 +++++++++++++++++++++++--------
>  1 file changed, 23 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index a494543d3ae1..195fe49ca32e 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[] = {
>  	[WDT_BITE_TIME] = 0x14,
>  };
>  
> +struct qcom_wdt_match_data {
> +	const u32 *offset;
> +	bool pretimeout;
> +};
> +
>  struct qcom_wdt {
>  	struct watchdog_device	wdd;
>  	unsigned long		rate;
> @@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(void *data)
>  	clk_disable_unprepare(data);
>  }
>  
> +static const struct qcom_wdt_match_data match_data_apcs_tmr = {
> +	.offset = reg_offset_data_apcs_tmr,
> +	.pretimeout = false,
> +};
> +
> +static const struct qcom_wdt_match_data match_data_kpss = {
> +	.offset = reg_offset_data_kpss,
> +	.pretimeout = true,
> +};
> +
>  static int qcom_wdt_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct qcom_wdt *wdt;
>  	struct resource *res;
>  	struct device_node *np = dev->of_node;
> -	const u32 *regs;
> +	const struct qcom_wdt_match_data *data;
>  	u32 percpu_offset;
>  	int irq, ret;
>  	struct clk *clk;
>  
> -	regs = of_device_get_match_data(dev);
> -	if (!regs) {
> +	data = of_device_get_match_data(dev);
> +	if (!data && !data->offset) {

This should be ||. However, the second check is really unnecessary
(it would be a coding error).

Guenter

>  		dev_err(dev, "Unsupported QCOM WDT module\n");
>  		return -ENODEV;
>  	}
> @@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>  
>  	/* check if there is pretimeout support */
>  	irq = platform_get_irq(pdev, 0);
> -	if (irq > 0) {
> +	if (data->pretimeout && irq > 0) {
>  		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
>  				       IRQF_TRIGGER_RISING,
>  				       "wdt_bark", &wdt->wdd);
> @@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>  	wdt->wdd.min_timeout = 1;
>  	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
>  	wdt->wdd.parent = dev;
> -	wdt->layout = regs;
> +	wdt->layout = data->offset;
>  
>  	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
>  		wdt->wdd.bootstatus = WDIOF_CARDRESET;
> @@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resume(struct device *dev)
>  static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
>  
>  static const struct of_device_id qcom_wdt_of_table[] = {
> -	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
> -	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
> -	{ .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
> +	{ .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
> +	{ .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
> +	{ .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
> -- 
> 2.24.0
>
diff mbox series

Patch

diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index a494543d3ae1..195fe49ca32e 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -40,6 +40,11 @@  static const u32 reg_offset_data_kpss[] = {
 	[WDT_BITE_TIME] = 0x14,
 };
 
+struct qcom_wdt_match_data {
+	const u32 *offset;
+	bool pretimeout;
+};
+
 struct qcom_wdt {
 	struct watchdog_device	wdd;
 	unsigned long		rate;
@@ -179,19 +184,29 @@  static void qcom_clk_disable_unprepare(void *data)
 	clk_disable_unprepare(data);
 }
 
+static const struct qcom_wdt_match_data match_data_apcs_tmr = {
+	.offset = reg_offset_data_apcs_tmr,
+	.pretimeout = false,
+};
+
+static const struct qcom_wdt_match_data match_data_kpss = {
+	.offset = reg_offset_data_kpss,
+	.pretimeout = true,
+};
+
 static int qcom_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qcom_wdt *wdt;
 	struct resource *res;
 	struct device_node *np = dev->of_node;
-	const u32 *regs;
+	const struct qcom_wdt_match_data *data;
 	u32 percpu_offset;
 	int irq, ret;
 	struct clk *clk;
 
-	regs = of_device_get_match_data(dev);
-	if (!regs) {
+	data = of_device_get_match_data(dev);
+	if (!data && !data->offset) {
 		dev_err(dev, "Unsupported QCOM WDT module\n");
 		return -ENODEV;
 	}
@@ -247,7 +262,7 @@  static int qcom_wdt_probe(struct platform_device *pdev)
 
 	/* check if there is pretimeout support */
 	irq = platform_get_irq(pdev, 0);
-	if (irq > 0) {
+	if (data->pretimeout && irq > 0) {
 		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
 				       IRQF_TRIGGER_RISING,
 				       "wdt_bark", &wdt->wdd);
@@ -267,7 +282,7 @@  static int qcom_wdt_probe(struct platform_device *pdev)
 	wdt->wdd.min_timeout = 1;
 	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
 	wdt->wdd.parent = dev;
-	wdt->layout = regs;
+	wdt->layout = data->offset;
 
 	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
 		wdt->wdd.bootstatus = WDIOF_CARDRESET;
@@ -311,9 +326,9 @@  static int __maybe_unused qcom_wdt_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
 
 static const struct of_device_id qcom_wdt_of_table[] = {
-	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
-	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
-	{ .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
+	{ .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
+	{ .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
+	{ .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);