diff mbox series

[5/6] arm64: dts: qcom: sm8250: Add remoteprocs

Message ID 20200622222747.717306-6-bjorn.andersson@linaro.org
State Accepted
Commit 23a8903785b9dc64abf97540fd6ea1b76944dcb6
Headers show
Series arm64: dts: qcom: Enable SM8250 remoteprocs | expand

Commit Message

Bjorn Andersson June 22, 2020, 10:27 p.m. UTC
Add remoteproc nodes for the audio, compute and sensor cores, define
glink for each one and enable them on the MTP with appropriate firmware
defined.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts |  15 +++
 arch/arm64/boot/dts/qcom/sm8250.dtsi    | 116 ++++++++++++++++++++++++
 2 files changed, 131 insertions(+)

-- 
2.26.2

Comments

Manivannan Sadhasivam June 23, 2020, 2:54 a.m. UTC | #1
On Mon, Jun 22, 2020 at 03:27:46PM -0700, Bjorn Andersson wrote:
> Add remoteproc nodes for the audio, compute and sensor cores, define

> glink for each one and enable them on the MTP with appropriate firmware

> defined.

> 

> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>


Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>


Thanks,
Mani

> ---

>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts |  15 +++

>  arch/arm64/boot/dts/qcom/sm8250.dtsi    | 116 ++++++++++++++++++++++++

>  2 files changed, 131 insertions(+)

> 

> diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts

> index 63d259931c4d..6894f8490dae 100644

> --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts

> +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts

> @@ -55,6 +55,11 @@ vreg_s6c_0p88: smpc6-regulator {

>  	};

>  };

>  

> +&adsp {

> +	status = "okay";

> +	firmware-name = "qcom/sm8250/adsp.mbn";

> +};

> +

>  &apps_rsc {

>  	pm8150-rpmh-regulators {

>  		compatible = "qcom,pm8150-rpmh-regulators";

> @@ -348,10 +353,20 @@ vreg_l7f_1p8: ldo7 {

>  	};

>  };

>  

> +&cdsp {

> +	status = "okay";

> +	firmware-name = "qcom/sm8250/cdsp.mbn";

> +};

> +

>  &qupv3_id_1 {

>  	status = "okay";

>  };

>  

> +&slpi {

> +	status = "okay";

> +	firmware-name = "qcom/sm8250/slpi.mbn";

> +};

> +

>  &tlmm {

>  	gpio-reserved-ranges = <28 4>, <40 4>;

>  };

> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi

> index 364d9a798673..a21299b9c62f 100644

> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi

> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi

> @@ -1052,6 +1052,83 @@ tcsr_mutex_regs: syscon@1f40000 {

>  			reg = <0x0 0x01f40000 0x0 0x40000>;

>  		};

>  

> +		slpi: remoteproc@5c00000 {

> +			compatible = "qcom,sm8250-slpi-pas";

> +			reg = <0 0x05c00000 0 0x4000>;

> +

> +			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,

> +					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;

> +			interrupt-names = "wdog", "fatal", "ready",

> +					  "handover", "stop-ack";

> +

> +			clocks = <&rpmhcc RPMH_CXO_CLK>;

> +			clock-names = "xo";

> +

> +			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,

> +					<&rpmhpd SM8250_LCX>,

> +					<&rpmhpd SM8250_LMX>;

> +			power-domain-names = "load_state", "lcx", "lmx";

> +

> +			memory-region = <&slpi_mem>;

> +

> +			qcom,smem-states = <&smp2p_slpi_out 0>;

> +			qcom,smem-state-names = "stop";

> +

> +			status = "disabled";

> +

> +			glink-edge {

> +				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI

> +							     IPCC_MPROC_SIGNAL_GLINK_QMP

> +							     IRQ_TYPE_EDGE_RISING>;

> +				mboxes = <&ipcc IPCC_CLIENT_SLPI

> +						IPCC_MPROC_SIGNAL_GLINK_QMP>;

> +

> +				label = "lpass";

> +				qcom,remote-pid = <3>;

> +			};

> +		};

> +

> +		cdsp: remoteproc@8300000 {

> +			compatible = "qcom,sm8250-cdsp-pas";

> +			reg = <0 0x08300000 0 0x10000>;

> +

> +			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,

> +					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;

> +			interrupt-names = "wdog", "fatal", "ready",

> +					  "handover", "stop-ack";

> +

> +			clocks = <&rpmhcc RPMH_CXO_CLK>;

> +			clock-names = "xo";

> +

> +			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,

> +					<&rpmhpd SM8250_CX>;

> +			power-domain-names = "load_state", "cx";

> +

> +			memory-region = <&cdsp_mem>;

> +

> +			qcom,smem-states = <&smp2p_cdsp_out 0>;

> +			qcom,smem-state-names = "stop";

> +

> +			status = "disabled";

> +

> +			glink-edge {

> +				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP

> +							     IPCC_MPROC_SIGNAL_GLINK_QMP

> +							     IRQ_TYPE_EDGE_RISING>;

> +				mboxes = <&ipcc IPCC_CLIENT_CDSP

> +						IPCC_MPROC_SIGNAL_GLINK_QMP>;

> +

> +				label = "lpass";

> +				qcom,remote-pid = <5>;

> +			};

> +		};

> +

>  		pdc: interrupt-controller@b220000 {

>  			compatible = "qcom,sm8250-pdc", "qcom,pdc";

>  			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;

> @@ -1668,6 +1745,45 @@ config {

>  			};

>  		};

>  

> +		adsp: remoteproc@17300000 {

> +			compatible = "qcom,sm8250-adsp-pas";

> +			reg = <0 0x17300000 0 0x100>;

> +

> +			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,

> +					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,

> +					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;

> +			interrupt-names = "wdog", "fatal", "ready",

> +					  "handover", "stop-ack";

> +

> +			clocks = <&rpmhcc RPMH_CXO_CLK>;

> +			clock-names = "xo";

> +

> +			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,

> +					<&rpmhpd SM8250_LCX>,

> +					<&rpmhpd SM8250_LMX>;

> +			power-domain-names = "load_state", "lcx", "lmx";

> +

> +			memory-region = <&adsp_mem>;

> +

> +			qcom,smem-states = <&smp2p_adsp_out 0>;

> +			qcom,smem-state-names = "stop";

> +

> +			status = "disabled";

> +

> +			glink-edge {

> +				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS

> +							     IPCC_MPROC_SIGNAL_GLINK_QMP

> +							     IRQ_TYPE_EDGE_RISING>;

> +				mboxes = <&ipcc IPCC_CLIENT_LPASS

> +						IPCC_MPROC_SIGNAL_GLINK_QMP>;

> +

> +				label = "lpass";

> +				qcom,remote-pid = <2>;

> +			};

> +		};

> +

>  		intc: interrupt-controller@17a00000 {

>  			compatible = "arm,gic-v3";

>  			#interrupt-cells = <3>;

> -- 

> 2.26.2

>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 63d259931c4d..6894f8490dae 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -55,6 +55,11 @@  vreg_s6c_0p88: smpc6-regulator {
 	};
 };
 
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
 &apps_rsc {
 	pm8150-rpmh-regulators {
 		compatible = "qcom,pm8150-rpmh-regulators";
@@ -348,10 +353,20 @@  vreg_l7f_1p8: ldo7 {
 	};
 };
 
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
 
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8250/slpi.mbn";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <40 4>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 364d9a798673..a21299b9c62f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1052,6 +1052,83 @@  tcsr_mutex_regs: syscon@1f40000 {
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 		};
 
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8250-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+					<&rpmhpd SM8250_LCX>,
+					<&rpmhpd SM8250_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <3>;
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8250-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+					<&rpmhpd SM8250_CX>;
+			power-domain-names = "load_state", "cx";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <5>;
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8250-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -1668,6 +1745,45 @@  config {
 			};
 		};
 
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8250-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+					<&rpmhpd SM8250_LCX>,
+					<&rpmhpd SM8250_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;