diff mbox

[24/40] ARM: ux500: Deactivate enablement of DMA40 during ATAG booting

Message ID 1377260620-18829-25-git-send-email-lee.jones@linaro.org
State Accepted
Commit 4f01a04cdeefdc52e3c5379726c293e51bdd3f2b
Headers show

Commit Message

Lee Jones Aug. 23, 2013, 12:23 p.m. UTC
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500.h   |  1 -
 arch/arm/mach-ux500/cpu-db8500.c     |  2 --
 arch/arm/mach-ux500/devices-db8500.c | 36 ------------------------------------
 arch/arm/mach-ux500/devices.h        |  2 --
 4 files changed, 41 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 06eb894..3b35a73 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -92,7 +92,6 @@  extern struct amba_pl011_data uart0_plat;
 extern struct amba_pl011_data uart1_plat;
 extern struct amba_pl011_data uart2_plat;
 extern struct pl022_ssp_controller ssp0_plat;
-extern struct stedma40_platform_data dma40_plat_data;
 
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 69cee39..1289a67 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -33,7 +33,6 @@ 
 #include "irqs.h"
 
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
 #include "board-mop500.h"
 #include "id.h"
@@ -135,7 +134,6 @@  static struct platform_device db8500_pmu_device = {
 };
 
 static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
 	&db8500_pmu_device,
 };
 
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index d30205b..1b2faba 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -11,7 +11,6 @@ 
 #include <linux/io.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/platform_data/dma-ste-dma40.h>
 #include <linux/mfd/dbx500-prcmu.h>
 
 #include "setup.h"
@@ -19,41 +18,6 @@ 
 
 #include "db8500-regs.h"
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U8500_DMA_BASE,
-		.end   = U8500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U8500_DMA_LCPA_BASE,
-		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB8500_DMA,
-		.end   = IRQ_DB8500_DMA,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct stedma40_platform_data dma40_plat_data = {
-	.disabled_channels = {-1},
-};
-
-struct platform_device u8500_dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name = "dma40",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dma40_resources),
-	.resource = dma40_resources
-};
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h
index da23c05..5bca7c6 100644
--- a/arch/arm/mach-ux500/devices.h
+++ b/arch/arm/mach-ux500/devices.h
@@ -12,6 +12,4 @@  struct amba_device;
 
 extern struct amba_device ux500_pl031_device;
 
-extern struct platform_device u8500_dma40_device;
-
 #endif