@@ -1145,6 +1145,16 @@ config MFD_WM8994
core support for the WM8994, in order to use the actual
functionaltiy of the device other drivers must be enabled.
+config MFD_STW481X
+ bool "Support for ST Microelectronics STw481x"
+ depends on I2C && ARCH_NOMADIK
+ select REGMAP_I2C
+ select MFD_CORE
+ help
+ Select this option to enable the STw481x chip driver used
+ in various ST Microelectronics and ST-Ericsson embedded
+ Nomadik series.
+
endmenu
endif
@@ -159,3 +159,4 @@ obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
+obj-$(CONFIG_MFD_STW481X) += stw481x.o
new file mode 100644
@@ -0,0 +1,250 @@
+/*
+ * Core driver for STw4810/STw4811
+ *
+ * Copyright (C) 2013 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stw481x.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+/*
+ * This driver can only access the non-USB portions of STw4811, the register
+ * range 0x00-0x10 dealing with USB is bound to the two special I2C pins used
+ * for USB control.
+ */
+
+static int stw481x_get_pctl_reg(struct stw481x *stw481x, u8 reg)
+{
+ u8 msb = (reg >> 3) & 0x03;
+ u8 lsb = (reg << 5) & 0xe0;
+ unsigned int val;
+ u8 vrfy;
+ int ret;
+
+ ret = regmap_write(stw481x->map, 0x1f, msb);
+ if (ret)
+ return ret;
+ ret = regmap_write(stw481x->map, 0x1e, lsb);
+ if (ret)
+ return ret;
+ ret = regmap_read(stw481x->map, 0x1f, &val);
+ if (ret)
+ return ret;
+ vrfy = (val & 0x03) << 3;
+ ret = regmap_read(stw481x->map, 0x1e, &val);
+ if (ret)
+ return ret;
+ vrfy |= ((val >> 5) & 0x07);
+ if (vrfy != reg)
+ return -EIO;
+ return (val >> 1) & 0x0f;
+}
+
+static int stw481x_startup(struct stw481x *stw481x)
+{
+ u8 vcore_val[] = { 100, 105, 110, 115, 120, 122, 124, 126, 128,
+ 130, 132, 134, 136, 138, 140, 145 };
+ u8 vpll_val[] = { 105, 120, 130, 180 };
+ u8 vaux_val[] = { 15, 18, 25, 28 };
+ u8 vcore;
+ u8 vcore_slp;
+ u8 vpll;
+ u8 vaux;
+ bool vaux_en;
+ bool it_warn;
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(stw481x->map, STW_CONF1, &val);
+ if (ret)
+ return ret;
+ vaux_en = !!(val & STW_CONF1_PDN_VAUX);
+ it_warn = !!(val & STW_CONF1_IT_WARN);
+
+ dev_info(&stw481x->client->dev, "voltages %s\n",
+ (val & STW_CONF1_V_MONITORING) ? "OK" : "LOW");
+ dev_info(&stw481x->client->dev, "MMC level shifter %s\n",
+ (val & STW_CONF1_MMC_LS_STATUS) ? "high impedance" : "ON");
+ dev_info(&stw481x->client->dev, "VMMC: %s\n",
+ (val & STW_CONF1_PDN_VMMC) ? "ON" : "disabled");
+
+ dev_info(&stw481x->client->dev, "STw481x power control registers:\n");
+
+ ret = stw481x_get_pctl_reg(stw481x, STW_PC_VCORE_SEL);
+ if (ret < 0)
+ return ret;
+ vcore = ret & 0x0f;
+
+ ret = stw481x_get_pctl_reg(stw481x, STW_PC_VAUX_SEL);
+ if (ret < 0)
+ return ret;
+ vaux = (ret >> 2) & 3;
+ vpll = (ret >> 4) & 1; /* Save bit 4 */
+
+ ret = stw481x_get_pctl_reg(stw481x, STW_PC_VPLL_SEL);
+ if (ret < 0)
+ return ret;
+ vpll |= (ret >> 1) & 2;
+
+ dev_info(&stw481x->client->dev, "VCORE: %u.%uV %s\n",
+ vcore_val[vcore] / 100, vcore_val[vcore] % 100,
+ (ret & 4) ? "ON" : "OFF");
+
+ dev_info(&stw481x->client->dev, "VPLL: %u.%uV %s\n",
+ vpll_val[vpll] / 100, vpll_val[vpll] % 100,
+ (ret & 0x10) ? "ON" : "OFF");
+
+ dev_info(&stw481x->client->dev, "VAUX: %u.%uV %s\n",
+ vaux_val[vaux] / 10, vaux_val[vaux] % 10,
+ vaux_en ? "ON" : "OFF");
+
+ ret = regmap_read(stw481x->map, STW_CONF2, &val);
+ if (ret)
+ return ret;
+
+ dev_info(&stw481x->client->dev, "TWARN: %s threshold, %s\n",
+ it_warn ? "below" : "above",
+ (val & STW_CONF2_MASK_TWARN) ? "enabled" : "mask through VDDOK");
+ dev_info(&stw481x->client->dev, "VMMC: %s\n",
+ (val & STW_CONF2_VMMC_EXT) ? "internal" : "external");
+ dev_info(&stw481x->client->dev, "IT WAKE UP: %s\n",
+ (val & STW_CONF2_MASK_IT_WAKE_UP) ? "enabled" : "masked");
+ dev_info(&stw481x->client->dev, "GPO1: %s\n",
+ (val & STW_CONF2_GPO1) ? "low" : "high impedance");
+ dev_info(&stw481x->client->dev, "GPO2: %s\n",
+ (val & STW_CONF2_GPO2) ? "low" : "high impedance");
+
+ ret = regmap_read(stw481x->map, STW_VCORE_SLEEP, &val);
+ if (ret)
+ return ret;
+ vcore_slp = val & 0x0f;
+ dev_info(&stw481x->client->dev, "VCORE SLEEP: %u.%uV\n",
+ vcore_val[vcore_slp] / 100, vcore_val[vcore_slp] % 100);
+
+ return 0;
+}
+
+/*
+ * MFD cells - we have one cell which is selected operation
+ * mode, and we always have a GPIO cell.
+ */
+static struct mfd_cell stw481x_cells[] = {
+ {
+ .of_compatible = "st,stw481x-vmmc",
+ .name = "stw481x-vmmc-regulator",
+ .id = -1,
+ },
+};
+
+const struct regmap_config stw481x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int stw481x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct stw481x *stw481x;
+ struct stw481x_platform_data *pdata = client->dev.platform_data;
+ int ret;
+ int i;
+
+ stw481x = devm_kzalloc(&client->dev, sizeof(*stw481x), GFP_KERNEL);
+ if (!stw481x)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, stw481x);
+ stw481x->client = client;
+ stw481x->pdata = pdata;
+ stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
+
+ ret = stw481x_startup(stw481x);
+ if (ret) {
+ dev_err(&client->dev, "chip initialization failed\n");
+ goto fail;
+ }
+
+ /* Set up and register the platform devices. */
+ for (i = 0; i < ARRAY_SIZE(stw481x_cells); i++) {
+ /* One state holder for all drivers, this is simple */
+ stw481x_cells[i].platform_data = stw481x;
+ stw481x_cells[i].pdata_size = sizeof(*stw481x);
+ }
+
+ ret = mfd_add_devices(&client->dev, 0, stw481x_cells,
+ ARRAY_SIZE(stw481x_cells), NULL, 0, NULL);
+ if (ret)
+ goto fail;
+
+ dev_info(&client->dev, "initialized STw481x device\n");
+
+ return 0;
+
+fail:
+ devm_kfree(&client->dev, stw481x);
+ return ret;
+}
+
+static int stw481x_remove(struct i2c_client *client)
+{
+ struct stw481x *stw481x = i2c_get_clientdata(client);
+
+ mfd_remove_devices(&client->dev);
+ devm_kfree(&client->dev, stw481x);
+ return 0;
+}
+
+/*
+ * This ID table is completely unused, as this is a pure
+ * device-tree probed driver, but it has to be here due to
+ * the structure of the I2C core.
+ */
+static const struct i2c_device_id dummy_id[] = {
+ { "dummy", 0 },
+ { }
+};
+
+static const struct of_device_id stw481x_match[] = {
+ { .compatible = "st,stw4810", },
+ { .compatible = "st,stw4811", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stw481x_match);
+
+static struct i2c_driver stw481x_driver = {
+ .driver = {
+ .name = "stw481x",
+ .of_match_table = stw481x_match,
+ },
+ .probe = stw481x_probe,
+ .remove = stw481x_remove,
+ .id_table = dummy_id,
+};
+
+static int __init stw481x_init(void)
+{
+ return i2c_add_driver(&stw481x_driver);
+}
+module_init(stw481x_init);
+
+static void __exit stw481x_exit(void)
+{
+ i2c_del_driver(&stw481x_driver);
+}
+module_exit(stw481x_exit);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("STw481x PMIC driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef MFD_STW481X_H
+#define MFD_STW481X_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+
+/* These registers are accessed from more than one driver */
+#define STW_CONF1 0x11U
+#define STW_CONF1_PDN_VMMC 0x01U
+#define STW_CONF1_VMMC_MASK 0x0eU
+#define STW_CONF1_VMMC_1_8V 0x02U
+#define STW_CONF1_VMMC_2_85V 0x04U
+#define STW_CONF1_VMMC_3V 0x06U
+#define STW_CONF1_VMMC_1_85V 0x08U
+#define STW_CONF1_VMMC_2_6V 0x0aU
+#define STW_CONF1_VMMC_2_7V 0x0cU
+#define STW_CONF1_VMMC_3_3V 0x0eU
+#define STW_CONF1_MMC_LS_STATUS 0x10U
+#define STW_CONF1_V_MONITORING 0x20U
+#define STW_CONF1_IT_WARN 0x40U
+#define STW_CONF1_PDN_VAUX 0x80U
+#define STW_PC_VCORE_SEL 0x05U
+#define STW_PC_VAUX_SEL 0x06U
+#define STW_PC_VPLL_SEL 0x07U
+#define STW_CONF2 0x20U
+#define STW_CONF2_MASK_TWARN 0x01U
+#define STW_CONF2_VMMC_EXT 0x02U
+#define STW_CONF2_MASK_IT_WAKE_UP 0x04U
+#define STW_CONF2_GPO1 0x08U
+#define STW_CONF2_GPO2 0x10U
+#define STW_VCORE_SLEEP 0x21U
+
+/**
+ * struct stw481x_platform_data - TPS61905x platform data
+ * @regulator_data: initialization data for the voltage
+ * regulator if used as a voltage source
+ */
+struct stw481x_platform_data {
+ struct regulator_init_data *regulator_data;
+};
+
+/**
+ * struct stw481x - state holder for the Stw481x drivers
+ * @mutex: mutex to serialize I2C accesses
+ * @i2c_client: corresponding I2C client
+ * @regulator: regulator device for regulator children
+ * @map: regmap handle to access device registers
+ */
+struct stw481x {
+ struct stw481x_platform_data *pdata;
+ struct mutex lock;
+ struct i2c_client *client;
+ struct regulator_dev *vmmc_regulator;
+ struct regmap *map;
+};
+
+#endif
This adds a driver for the STw481x PMICs found in the Nomadik family of platforms. This one uses pure device tree probing. Print some of the OTP registers on boot and register a regulator MFD child. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Hi Sam, I'm seeking an ACK for this driver to take it through the ARM SoC tree with the enablement patches. --- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 1 + drivers/mfd/stw481x.c | 250 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/stw481x.h | 67 ++++++++++++ 4 files changed, 328 insertions(+) create mode 100644 drivers/mfd/stw481x.c create mode 100644 include/linux/mfd/stw481x.h