@@ -64,16 +64,39 @@
#define ST_PRESS_LPS331AP_OUT_XL_ADDR 0x28
#define ST_TEMP_LPS331AP_OUT_L_ADDR 0x2b
-static const struct iio_chan_spec st_press_channels[] = {
- ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE,
+static const struct iio_chan_spec st_press_lps331ap_channels[] = {
+ {
+ .type = IIO_PRESSURE,
+ .channel2 = IIO_NO_MOD,
+ .address = ST_PRESS_LPS331AP_OUT_XL_ADDR,
+ .scan_index = ST_SENSORS_SCAN_X,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 24,
+ .storagebits = 24,
+ .endianness = IIO_LE,
+ },
+ .info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
- ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24,
- ST_PRESS_LPS331AP_OUT_XL_ADDR),
- ST_SENSORS_LSM_CHANNELS(IIO_TEMP,
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
- BIT(IIO_CHAN_INFO_OFFSET),
- -1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16,
- ST_TEMP_LPS331AP_OUT_L_ADDR),
+ .modified = 0,
+ },
+ {
+ .type = IIO_TEMP,
+ .channel2 = IIO_NO_MOD,
+ .address = ST_TEMP_LPS331AP_OUT_L_ADDR,
+ .scan_index = -1,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_LE,
+ },
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .modified = 0,
+ },
IIO_CHAN_SOFT_TIMESTAMP(1)
};
@@ -83,7 +106,7 @@ static const struct st_sensors st_press_sensors[] = {
.sensors_supported = {
[0] = LPS331AP_PRESS_DEV_NAME,
},
- .ch = (struct iio_chan_spec *)st_press_channels,
+ .ch = (struct iio_chan_spec *)st_press_lps331ap_channels,
.odr = {
.addr = ST_PRESS_LPS331AP_ODR_ADDR,
.mask = ST_PRESS_LPS331AP_ODR_MASK,
@@ -222,7 +245,7 @@ int st_press_common_probe(struct iio_dev *indio_dev,
pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
pdata->multiread_bit = pdata->sensor->multi_read_bit;
indio_dev->channels = pdata->sensor->ch;
- indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
+ indio_dev->num_channels = ARRAY_SIZE(st_press_lps331ap_channels);
if (pdata->sensor->fs.addr != 0)
pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
Due to the MACRO used, the task of reading, understanding and maintaining the LPS331AP's channel descriptor is substantially difficult. This patch is based on the view that it's better to have easy to read, maintainable code than to save a few lines here and there. For that reason we're expanding the array so initialisation is completed in full. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/iio/pressure/st_pressure_core.c | 45 +++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 11 deletions(-)