diff mbox

[32/38] iio: accel-core: st: Move LSM303DLH into correct group

Message ID 1378817379-8238-33-git-send-email-lee.jones@linaro.org
State New
Headers show

Commit Message

Lee Jones Sept. 10, 2013, 12:49 p.m. UTC 
The LSM303DLH's WAI (WhoAmI) is 0x33, meaning it should be enabled by
Accel Sensor group one. For the device to probe without error, we'll
need to ensure it's registered with the correct WAI.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/iio/accel/st_accel_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index ea62291..03a2b6b 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -170,6 +170,7 @@  static const struct st_sensors st_accel_sensors[] = {
 			[2] = LSM330D_ACCEL_DEV_NAME,
 			[3] = LSM330DL_ACCEL_DEV_NAME,
 			[4] = LSM330DLC_ACCEL_DEV_NAME,
+			[5] = LSM303DLH_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
@@ -238,8 +239,7 @@  static const struct st_sensors st_accel_sensors[] = {
 		.sensors_supported = {
 			[0] = LIS331DLH_ACCEL_DEV_NAME,
 			[1] = LSM303DL_ACCEL_DEV_NAME,
-			[2] = LSM303DLH_ACCEL_DEV_NAME,
-			[3] = LSM303DLM_ACCEL_DEV_NAME,
+			[2] = LSM303DLM_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {