diff mbox series

[v13,2/7] clk: Ingenic: Adjust cgu code to make it compatible with X1830.

Message ID 20200528031549.13846-3-zhouyanjie@wanyeetech.com
State Superseded
Headers show
Series None | expand

Commit Message

Zhou Yanjie May 28, 2020, 3:15 a.m. UTC
The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, a new
"bypass_reg" was introduced. In addition, when calculating
rate, the PLL of X1830 introduced an extra 2x multiplier,
so a new "rate_multiplier" was introduced. And adjust the
code in jz47xx-cgu.c and x1000-cgu.c, make it to be
compatible with the new cgu code.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2->v3:
    Adjust order from [1/5] in v2 to [2/5] in v3.
    
    v3->v4:
    Merge [3/5] in v3 into this patch.
    
    v4->v5:
    Rebase on top of kernel 5.6-rc1.
    
    v5->v6:
    Revert "pll_reg" to "reg" to minimize patch as Paul Cercueil's suggest.
    
    v6->v7:
    Update commit message.
    
    v7->v8:
    No change.
    
    v8->v9:
    No change.
    
    v9->v10:
    No change.
    
    v10->v11:
    No change.
    
    v11->v12:
    No change.
    
    v12->v13:
    No change.

 drivers/clk/ingenic/cgu.c         | 16 +++++++++++++---
 drivers/clk/ingenic/cgu.h         |  4 ++++
 drivers/clk/ingenic/jz4725b-cgu.c |  4 ++++
 drivers/clk/ingenic/jz4740-cgu.c  |  4 ++++
 drivers/clk/ingenic/jz4770-cgu.c  |  8 +++++++-
 drivers/clk/ingenic/jz4780-cgu.c  |  3 +++
 drivers/clk/ingenic/x1000-cgu.c   |  6 ++++++
 7 files changed, 41 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab1302ad1450..d7981b670221 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -90,6 +90,9 @@  ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+	ctl = readl(cgu->base + pll_info->bypass_reg);
+
 	bypass = !pll_info->no_bypass_bit &&
 		 !!(ctl & BIT(pll_info->bypass_bit));
 
@@ -103,7 +106,8 @@  ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(od == pll_info->od_max);
 	od++;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static unsigned long
@@ -136,7 +140,8 @@  ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	if (pod)
 		*pod = od;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static inline const struct ingenic_cgu_clk_info *to_clk_info(
@@ -209,9 +214,14 @@  static int ingenic_pll_enable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->bypass_reg);
 
 	ctl &= ~BIT(pll_info->bypass_bit);
+
+	writel(ctl, cgu->base + pll_info->bypass_reg);
+
+	ctl = readl(cgu->base + pll_info->reg);
+
 	ctl |= BIT(pll_info->enable_bit);
 
 	writel(ctl, cgu->base + pll_info->reg);
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 0dc8004079ee..2c75ef4a36f5 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -17,6 +17,7 @@ 
 /**
  * struct ingenic_cgu_pll_info - information about a PLL
  * @reg: the offset of the PLL's control register within the CGU
+ * @rate_multiplier: the multiplier needed by pll rate calculation
  * @m_shift: the number of bits to shift the multiplier value by (ie. the
  *           index of the lowest bit of the multiplier value in the PLL's
  *           control register)
@@ -37,6 +38,7 @@ 
  * @od_encoding: a pointer to an array mapping post-VCO divider values to
  *               their encoded values in the PLL control register, or -1 for
  *               unsupported values
+ * @bypass_reg: the offset of the bypass control register within the CGU
  * @bypass_bit: the index of the bypass bit in the PLL control register
  * @enable_bit: the index of the enable bit in the PLL control register
  * @stable_bit: the index of the stable bit in the PLL control register
@@ -44,10 +46,12 @@ 
  */
 struct ingenic_cgu_pll_info {
 	unsigned reg;
+	unsigned rate_multiplier;
 	const s8 *od_encoding;
 	u8 m_shift, m_bits, m_offset;
 	u8 n_shift, n_bits, n_offset;
 	u8 od_shift, od_bits, od_max;
+	unsigned bypass_reg;
 	u8 bypass_bit;
 	u8 enable_bit;
 	u8 stable_bit;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index a3b4635f6278..8c38e72d14a7 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -9,7 +9,9 @@ 
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4725b-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -54,6 +56,7 @@  static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 		.parents = { JZ4725B_CLK_EXT, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
@@ -65,6 +68,7 @@  static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 			.od_max = 4,
 			.od_encoding = pll_od_encoding,
 			.stable_bit = 10,
+			.bypass_reg = CGU_REG_CPPCR,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 		},
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4f0e92c877d6..c0ac9196a581 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -10,7 +10,9 @@ 
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4740-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -69,6 +71,7 @@  static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
@@ -80,6 +83,7 @@  static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 			.od_max = 4,
 			.od_encoding = pll_od_encoding,
 			.stable_bit = 10,
+			.bypass_reg = CGU_REG_CPPCR,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 		},
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index c051ecba5cf8..9ea4490ecb7f 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -9,7 +9,9 @@ 
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4770-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -102,6 +104,7 @@  static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
 			.reg = CGU_REG_CPPCR0,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -112,6 +115,7 @@  static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR0,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 			.stable_bit = 10,
@@ -124,6 +128,7 @@  static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
 			.reg = CGU_REG_CPPCR1,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -134,9 +139,10 @@  static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR1,
+			.no_bypass_bit = true,
 			.enable_bit = 7,
 			.stable_bit = 6,
-			.no_bypass_bit = true,
 		},
 	},
 
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index c758f1643067..6c5b8029cc8a 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -13,6 +13,7 @@ 
 #include <linux/of.h>
 
 #include <dt-bindings/clock/jz4780-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -266,6 +267,7 @@  static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 
 #define DEF_PLL(name) { \
 	.reg = CGU_REG_ ## name, \
+	.rate_multiplier = 1, \
 	.m_shift = 19, \
 	.m_bits = 13, \
 	.m_offset = 1, \
@@ -277,6 +279,7 @@  static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	.od_max = 16, \
 	.od_encoding = pll_od_encoding, \
 	.stable_bit = 6, \
+	.bypass_reg = CGU_REG_ ## name, \
 	.bypass_bit = 1, \
 	.enable_bit = 0, \
 }
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b22d87b3f555..c33934d8ac14 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -7,7 +7,9 @@ 
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/x1000-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -58,6 +60,7 @@  static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_APLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -68,6 +71,7 @@  static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_APLL,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 			.stable_bit = 10,
@@ -79,6 +83,7 @@  static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_MPLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -89,6 +94,7 @@  static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_MPLL,
 			.bypass_bit = 6,
 			.enable_bit = 7,
 			.stable_bit = 0,