@@ -569,4 +569,13 @@ config PWM_ZX
To compile this driver as a module, choose M here: the module
will be called pwm-zx.
+config PWM_KEEMBAY
+ tristate "Intel Keem Bay PWM driver"
+ depends on ARM64
+ help
+ The platform driver for Intel Keem Bay PWM controller.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-keembay.
+
endif
@@ -55,3 +55,4 @@ obj-$(CONFIG_PWM_TWL) += pwm-twl.o
obj-$(CONFIG_PWM_TWL_LED) += pwm-twl-led.o
obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
obj-$(CONFIG_PWM_ZX) += pwm-zx.o
+obj-$(CONFIG_PWM_KEEMBAY) += pwm-keembay.o
new file mode 100644
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Keem Bay PWM driver
+ *
+ * Copyright (C) 2020 Intel Corporation
+ * Authors: Lai Poey Seng <poey.seng.lai@intel.com>
+ * Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define TOTAL_PWM_CHANNELS 6
+#define LEAD_IN_DEFAULT 0
+#define PWM_COUNT_MAX 65535
+
+#define KEEMBAY_PWM_EN_BIT 31
+
+/* Mask */
+#define KEEMBAY_PWM_RPT_CNT_MASK GENMASK(15, 0)
+#define KEEMBAY_PWM_LEAD_IN_MASK GENMASK(30, 16)
+#define KEEMBAY_PWM_HIGH_MASK GENMASK(31, 16)
+#define KEEMBAY_PWM_LOW_MASK GENMASK(15, 0)
+
+/* PWM Register offset */
+#define PWM_LEADIN0_OFFSET 0x00
+#define PWM_LEADIN1_OFFSET 0x04
+#define PWM_LEADIN2_OFFSET 0x08
+#define PWM_LEADIN3_OFFSET 0x0c
+#define PWM_LEADIN4_OFFSET 0x10
+#define PWM_LEADIN5_OFFSET 0x14
+
+#define PWM_HIGHLOW0_OFFSET 0x20
+#define PWM_HIGHLOW1_OFFSET 0x24
+#define PWM_HIGHLOW2_OFFSET 0x28
+#define PWM_HIGHLOW3_OFFSET 0x2c
+#define PWM_HIGHLOW4_OFFSET 0x30
+#define PWM_HIGHLOW5_OFFSET 0x34
+
+struct keembay_pwm {
+ struct pwm_chip chip;
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *regmap;
+};
+
+static inline struct keembay_pwm *to_keembay_pwm_dev(struct pwm_chip *chip)
+{
+ return container_of(chip, struct keembay_pwm, chip);
+}
+
+static inline void keembay_pwm_enable_channel(struct keembay_pwm *priv, int ch)
+{
+ u32 buff, offset;
+ void __iomem *address;
+
+ offset = PWM_LEADIN0_OFFSET + ch * 4;
+ address = priv->regmap + offset;
+ buff = readl(address);
+ buff |= BIT(KEEMBAY_PWM_EN_BIT);
+ writel(buff, address);
+}
+
+static inline void keembay_pwm_disable_channel(struct keembay_pwm *priv, int ch)
+{
+ u32 buff, offset;
+ void __iomem *address;
+
+ offset = PWM_LEADIN0_OFFSET + ch * 4;
+ address = priv->regmap + offset;
+ buff = readl(address);
+ buff &= ~BIT(KEEMBAY_PWM_EN_BIT);
+ writel(buff, address);
+}
+
+static inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
+ u32 val, u32 reg, int ch)
+{
+ u32 buff, offset, tmp;
+ void __iomem *address;
+
+ offset = reg + ch * 4;
+ address = priv->regmap + offset;
+ buff = readl(address);
+ tmp = buff & ~mask;
+ tmp |= FIELD_PREP(mask, val);
+ writel(tmp, address);
+}
+
+static inline u32 keembay_pwm_config_min(struct keembay_pwm *priv)
+{
+ unsigned long long divd, divs;
+
+ divd = NSEC_PER_SEC;
+ divs = clk_get_rate(priv->clk);
+ do_div(divd, divs);
+
+ return (u32)divd;
+}
+
+static inline u16 keembay_pwm_config_duty_cycle(struct keembay_pwm *priv,
+ int duty_ns, u32 ns_min)
+{
+ unsigned long long divd;
+
+ divd = duty_ns;
+ do_div(divd, ns_min);
+ if ((u16)divd == 0)
+ return 0;
+
+ return (u16)divd - 1;
+}
+
+static inline u16 keembay_pwm_config_period(struct keembay_pwm *priv,
+ int period_ns,
+ int duty_ns,
+ u32 ns_min)
+{
+ unsigned long long divd;
+
+ divd = period_ns - duty_ns;
+ do_div(divd, ns_min);
+ if ((u16)divd == 0)
+ return 0;
+
+ return (u16)divd - 1;
+}
+
+/*
+ * For calculating "high time" register value:
+ * High time (quotient only) = duty_cycle / ns_min
+ *
+ * For calculating "low time" register value:
+ * Low time (quotient only) = (period - duty_cycle) / ns_min
+ *
+ * All values used are in nanoseconds for calculation.
+ */
+static int keembay_pwm_config(struct keembay_pwm *priv, int ch,
+ int duty_ns, int period_ns, int count)
+{
+ u32 ns_min;
+ u16 pwm_h_count, pwm_l_count;
+
+ /* Write to lead in */
+ keembay_pwm_update_bits(priv, KEEMBAY_PWM_LEAD_IN_MASK,
+ LEAD_IN_DEFAULT,
+ PWM_LEADIN0_OFFSET, ch);
+
+ /* Write the number of PWM pulse repetition */
+ keembay_pwm_update_bits(priv, KEEMBAY_PWM_RPT_CNT_MASK, count,
+ PWM_LEADIN0_OFFSET, ch);
+
+ /* Calculate min */
+ ns_min = keembay_pwm_config_min(priv);
+
+ /* For duty cycle */
+ pwm_h_count = keembay_pwm_config_duty_cycle(priv, duty_ns, ns_min);
+
+ /* Write to high registers */
+ keembay_pwm_update_bits(priv, KEEMBAY_PWM_HIGH_MASK, pwm_h_count,
+ PWM_HIGHLOW0_OFFSET, ch);
+
+ /* For period */
+ pwm_l_count = keembay_pwm_config_period(priv, period_ns, duty_ns,
+ ns_min);
+
+ /* Write to low registers */
+ keembay_pwm_update_bits(priv, KEEMBAY_PWM_LOW_MASK, pwm_l_count,
+ PWM_HIGHLOW0_OFFSET, ch);
+
+ return 0;
+}
+
+static int keembay_pwm_enable(struct keembay_pwm *priv, int ch)
+{
+ int ret;
+
+ ret = clk_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ /* Enable channel */
+ keembay_pwm_enable_channel(priv, ch);
+
+ return 0;
+}
+
+static void keembay_pwm_disable(struct keembay_pwm *priv, int ch)
+{
+ /* Disable channel */
+ keembay_pwm_disable_channel(priv, ch);
+
+ clk_disable(priv->clk);
+}
+
+static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+
+ if (!state->enabled && pwm_is_enabled(pwm)) {
+ keembay_pwm_disable(priv, pwm->hwpwm);
+ return 0;
+ }
+
+ if (state->count > PWM_COUNT_MAX)
+ return -EINVAL;
+
+ if (state->polarity != pwm_get_polarity(pwm))
+ return -ENOSYS;
+
+ keembay_pwm_config(priv, pwm->hwpwm, state->duty_cycle,
+ state->period, state->count);
+
+ if (state->enabled && !pwm_is_enabled(pwm))
+ return keembay_pwm_enable(priv, pwm->hwpwm);
+
+ return 0;
+}
+
+static const struct pwm_ops keembay_pwm_ops = {
+ .owner = THIS_MODULE,
+ .apply = keembay_pwm_apply,
+};
+
+static int keembay_pwm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct keembay_pwm *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ /*
+ * Prepare clock here, and carry out clock enabling/disabling
+ * during channel enablement/disablement.
+ * The clock will not be unprepared due to shared usage with GPIO.
+ */
+ ret = clk_prepare(priv->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to prepare PWM clock\n");
+ return ret;
+ }
+
+ priv->regmap = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->chip.base = -1;
+ priv->chip.dev = dev;
+ priv->chip.ops = &keembay_pwm_ops;
+ priv->chip.npwm = TOTAL_PWM_CHANNELS;
+
+ ret = pwmchip_add(&priv->chip);
+ if (ret < 0) {
+ dev_err(dev, "Failed to add PWM chip: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int keembay_pwm_remove(struct platform_device *pdev)
+{
+ struct keembay_pwm *priv = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < priv->chip.npwm; i++)
+ pwm_disable(&priv->chip.pwms[i]);
+
+ pwmchip_remove(&priv->chip);
+
+ return 0;
+}
+
+static const struct of_device_id keembay_pwm_of_match[] = {
+ { .compatible = "intel,keembay-pwm" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, keembay_pwm_of_match);
+
+static struct platform_driver keembay_pwm_driver = {
+ .probe = keembay_pwm_probe,
+ .remove = keembay_pwm_remove,
+ .driver = {
+ .name = "pwm-keembay",
+ .of_match_table = keembay_pwm_of_match,
+ },
+};
+module_platform_driver(keembay_pwm_driver);
+
+MODULE_ALIAS("platform:keembay");
+MODULE_DESCRIPTION("Intel Keem Bay PWM driver");
+MODULE_LICENSE("GPL v2");