new file mode 100644
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ The Inter-Processor Communication Controller (IPCC) is a centralized hardware
+ to route interrupts across various subsystems. It involves a three-level
+ addressing scheme called protocol, client and signal. For example, consider an
+ entity on the Application Processor Subsystem (APSS) that wants to listen to
+ Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
+ a case, the client would be Modem (client-id is 2) and the signal would be
+ SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
+ protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h
+ for the list of such IDs.
+
+properties:
+ compatible:
+ const: "qcom,ipcc"
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 3
+ description:
+ The first cell is the client-id, the second cell is the signal-id and the
+ third cell is the interrupt type.
+
+ "#mbox-cells":
+ const: 2
+ description:
+ The first cell is the client-id, and the second cell is the signal-id.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+ mailbox: qcom,ipcc@408000 {
+ compatible = "qcom,ipcc";
+ reg = <0x408000 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
+
+ /* Other SMP2P fields */
+ };
new file mode 100644
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_MAILBOX_IPCC_H
+#define __DT_BINDINGS_MAILBOX_IPCC_H
+
+/* Signal IDs for MPROC protocol */
+#define IPCC_MPROC_SIGNAL_GLINK_QMP 0
+#define IPCC_MPROC_SIGNAL_SMP2P 2
+#define IPCC_MPROC_SIGNAL_PING 3
+
+/* Client IDs */
+#define IPCC_CLIENT_AOP 0
+#define IPCC_CLIENT_TZ 1
+#define IPCC_CLIENT_MPSS 2
+#define IPCC_CLIENT_LPASS 3
+#define IPCC_CLIENT_SLPI 4
+#define IPCC_CLIENT_SDC 5
+#define IPCC_CLIENT_CDSP 6
+#define IPCC_CLIENT_NPU 7
+#define IPCC_CLIENT_APSS 8
+#define IPCC_CLIENT_GPU 9
+#define IPCC_CLIENT_CVP 10
+#define IPCC_CLIENT_CAM 11
+#define IPCC_CLIENT_VPU 12
+#define IPCC_CLIENT_PCIE0 13
+#define IPCC_CLIENT_PCIE1 14
+#define IPCC_CLIENT_PCIE2 15
+#define IPCC_CLIENT_SPSS 16
+
+#endif
Add devicetree YAML binding for Qualcomm Inter-Processor Communication Controller (IPCC) block. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- .../bindings/mailbox/qcom-ipcc.yaml | 77 +++++++++++++++++++ include/dt-bindings/mailbox/qcom-ipcc.h | 33 ++++++++ 2 files changed, 110 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml create mode 100644 include/dt-bindings/mailbox/qcom-ipcc.h