@@ -486,9 +486,11 @@ config MACH_LOONGSON64
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT
- select LOONGSON_MC146818
select ZONE_DMA32
select NUMA
+ select COMMON_CLK
+ select USE_OF
+ select BUILTIN_DTB
help
This enables the support of Loongson-2/3 family of machines.
@@ -3081,7 +3083,7 @@ endchoice
choice
prompt "Kernel command line type" if !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
- !MIPS_MALTA && \
+ !MACH_LOONGSON64 && !MIPS_MALTA && \
!CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER
@@ -4,6 +4,7 @@ subdir-y += cavium-octeon
subdir-y += img
subdir-y += ingenic
subdir-y += lantiq
+subdir-y += loongson
subdir-y += mscc
subdir-y += mti
subdir-y += netlogic
new file mode 100644
@@ -0,0 +1,4 @@
+# SPDX_License_Identifier: GPL_2.0
+dtb-$(CONFIG_MACH_LOONGSON64) += loongson3_4core_rs780e.dtb loongson3_8core_rs780e.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
new file mode 100644
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ package0: bus@1fe00000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+ 0 0x3ff00000 0 0x3ff00000 0x100000
+ 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000 /* 3A HT Config Space */
+ 0x1efd 0xfb000000 0x1efd 0xfb000000 0x10000000 /* 3B HT Config Space */>;
+
+ liointc: interrupt-controller@3ff01400 {
+ compatible = "loongson,liointc-1.0";
+ reg = <0 0x3ff01400 0x64>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>, <3>;
+ interrupt-names = "int0", "int1";
+
+ loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+ <0x0f000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+
+ };
+
+ cpu_uart0: serial@1fe001e0 {
+ compatible = "ns16550a";
+ reg = <0 0x1fe001e0 0x8>;
+ clock-frequency = <33000000>;
+ interrupt-parent = <&liointc>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ cpu_uart1: serial@1fe001e8 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x1fe001e8 0x8>;
+ clock-frequency = <33000000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&liointc>;
+ no-loopback-test;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson3-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+ compatible = "loongson,loongson3-4core-rs780e";
+};
+
+&package0 {
+ htpic: interrupt-controller@efdfb000080 {
+ compatible = "loongson,htpic-1.0";
+ reg = <0xefd 0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
new file mode 100644
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson3-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+ compatible = "loongson,loongson3-8core-rs780e";
+};
+
+&package0 {
+ htpic: interrupt-controller@1efdfb000080 {
+ compatible = "loongson,htpic-1.0";
+ reg = <0x1efd 0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
new file mode 100644
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ bus@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x10000000 0 0x10000000 0 0x10000000
+ 0 0x40000000 0 0x40000000 0 0x40000000
+ 0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>;
+
+ isa {
+ compatible = "isa";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0 0 0x1000>;
+
+ rtc0: rtc@70 {
+ compatible = "motorola,mc146818";
+ reg = <1 0x70 0x8>;
+ interrupts = <8>;
+ interrupt-parent = <&htpic>;
+ };
+ };
+ };
+};
Add generic device dts for Loongson-3 devices. They are currently almost identical but will be different later. Some PCH devices like PCI Host Bridge is still enabled by platform code for now. Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> --- arch/mips/Kconfig | 6 +- arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/loongson/Makefile | 4 ++ .../boot/dts/loongson/loongson3-package.dtsi | 62 +++++++++++++++++++ .../dts/loongson/loongson3_4core_rs780e.dts | 25 ++++++++ .../dts/loongson/loongson3_8core_rs780e.dts | 25 ++++++++ arch/mips/boot/dts/loongson/rs780e-pch.dtsi | 26 ++++++++ 7 files changed, 147 insertions(+), 2 deletions(-) create mode 100644 arch/mips/boot/dts/loongson/Makefile create mode 100644 arch/mips/boot/dts/loongson/loongson3-package.dtsi create mode 100644 arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dts create mode 100644 arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dts create mode 100644 arch/mips/boot/dts/loongson/rs780e-pch.dtsi