diff mbox series

[v5,08/12] spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path

Message ID 20200318001603.9650-9-olteanv@gmail.com
State Superseded
Headers show
Series NXP DSPI bugfixes and support for LS1028A | expand

Commit Message

Vladimir Oltean March 18, 2020, 12:15 a.m. UTC
From: Vladimir Oltean <vladimir.oltean@nxp.com>

Interrupts are not necessary for DMA functionality, since the completion
event is provided by the DMA driver.

But if the driver fails to request the IRQ defined in the device tree,
it will call dspi_poll which would make the driver hang waiting for data
to become available in the RX FIFO.

Fixes: c55be3059159 ("spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v5:
None.

Changes in v4:
Patch is new.

 drivers/spi/spi-fsl-dspi.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 81e22b6eadc7..fcc6f20b6631 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -965,13 +965,15 @@  static int dspi_transfer_one_message(struct spi_controller *ctlr,
 			goto out;
 		}
 
-		if (!dspi->irq) {
-			do {
-				status = dspi_poll(dspi);
-			} while (status == -EINPROGRESS);
-		} else if (trans_mode != DSPI_DMA_MODE) {
-			wait_for_completion(&dspi->xfer_done);
-			reinit_completion(&dspi->xfer_done);
+		if (trans_mode != DSPI_DMA_MODE) {
+			if (dspi->irq) {
+				wait_for_completion(&dspi->xfer_done);
+				reinit_completion(&dspi->xfer_done);
+			} else {
+				do {
+					status = dspi_poll(dspi);
+				} while (status == -EINPROGRESS);
+			}
 		}
 
 		spi_transfer_delay_exec(transfer);