new file mode 100644
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMOLED MIPI-DSI panels
+
+maintainers:
+ - Hoegeun Kwon <hoegeun.kwon@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel
+ - samsung,s6e63j0x03
+ # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+ - samsung,s6e3ha2
+ # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
+ - samsung,s6e3hf2
+
+ reg: true
+ reset-gpios: true
+ enable-gpios: true
+ te-gpios: true
+
+ vdd3-supply:
+ description: I/O voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
deleted file mode 100644
@@ -1,31 +0,0 @@
-Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
-Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
-
-Required properties:
- - compatible: should be one of:
- "samsung,s6e3ha2",
- "samsung,s6e3hf2".
- - reg: the virtual channel number of a DSI peripheral
- - vdd3-supply: I/O voltage supply
- - vci-supply: voltage supply for analog circuits
- - reset-gpios: a GPIO spec for the reset pin (active low)
- - enable-gpios: a GPIO spec for the panel enable pin (active high)
-
-Optional properties:
- - te-gpios: a GPIO spec for the tearing effect synchronization signal
- gpio pin (active high)
-
-Example:
-&dsi {
- ...
-
- panel@0 {
- compatible = "samsung,s6e3ha2";
- reg = <0>;
- vdd3-supply = <&ldo27_reg>;
- vci-supply = <&ldo28_reg>;
- reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
- enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
- te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
- };
-};
deleted file mode 100644
@@ -1,24 +0,0 @@
-Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
-
-Required properties:
- - compatible: "samsung,s6e63j0x03"
- - reg: the virtual channel number of a DSI peripheral
- - vdd3-supply: I/O voltage supply
- - vci-supply: voltage supply for analog circuits
- - reset-gpios: a GPIO spec for the reset pin (active low)
- - te-gpios: a GPIO spec for the tearing effect synchronization signal
- gpio pin (active high)
-
-Example:
-&dsi {
- ...
-
- panel@0 {
- compatible = "samsung,s6e63j0x03";
- reg = <0>;
- vdd3-supply = <&ldo16_reg>;
- vci-supply = <&ldo20_reg>;
- reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
- te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
- };
-};
For samsung there was two AMOLED panels with the same description. Collect them in one binding file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> --- .../panel/samsung,amoled-mipi-dsi.yaml | 65 +++++++++++++++++++ .../display/panel/samsung,s6e3ha2.txt | 31 --------- .../display/panel/samsung,s6e63j0x03.txt | 24 ------- 3 files changed, 65 insertions(+), 55 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt