@@ -1599,9 +1599,10 @@ void mmc_power_off(struct mmc_host *host)
/*
* Reset ocr mask to be the highest possible voltage supported for
- * this mmc host. This value will be used at next power up.
+ * this card. This value will be used at next power up.
*/
- host->ocr = 1 << (fls(host->ocr_avail) - 1);
+ if (host->card)
+ host->card->ocr = 1 << (fls(host->ocr_avail) - 1);
if (!mmc_host_is_spi(host)) {
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
@@ -2575,7 +2576,7 @@ int mmc_power_restore_host(struct mmc_host *host)
return -EINVAL;
}
- mmc_power_up(host, host->ocr);
+ mmc_power_up(host, host->card->ocr);
ret = host->bus_ops->power_restore(host);
mmc_bus_put(host);
@@ -934,6 +934,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
goto err;
}
+ card->ocr = ocr;
card->type = MMC_TYPE_MMC;
card->rca = 1;
memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
@@ -1533,9 +1534,9 @@ static int mmc_resume(struct mmc_host *host)
BUG_ON(!host->card);
mmc_claim_host(host);
- mmc_power_up(host, host->ocr);
- mmc_select_voltage(host, host->ocr);
- err = mmc_init_card(host, host->ocr, host->card);
+ mmc_power_up(host, host->card->ocr);
+ mmc_select_voltage(host, host->card->ocr);
+ err = mmc_init_card(host, host->card->ocr, host->card);
mmc_release_host(host);
return err;
@@ -1579,7 +1580,7 @@ static int mmc_runtime_resume(struct mmc_host *host)
mmc_claim_host(host);
- mmc_power_up(host, host->ocr);
+ mmc_power_up(host, host->card->ocr);
err = mmc_resume(host);
if (err)
pr_err("%s: error %d doing aggessive resume\n",
@@ -1595,7 +1596,7 @@ static int mmc_power_restore(struct mmc_host *host)
host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_claim_host(host);
- ret = mmc_init_card(host, host->ocr, host->card);
+ ret = mmc_init_card(host, host->card->ocr, host->card);
mmc_release_host(host);
return ret;
@@ -1640,7 +1641,7 @@ static void mmc_attach_bus_ops(struct mmc_host *host)
int mmc_attach_mmc(struct mmc_host *host)
{
int err;
- u32 ocr;
+ u32 ocr, rocr;
BUG_ON(!host);
WARN_ON(!host->claimed);
@@ -1677,12 +1678,12 @@ int mmc_attach_mmc(struct mmc_host *host)
ocr &= ~0x7F;
}
- host->ocr = mmc_select_voltage(host, ocr);
+ rocr = mmc_select_voltage(host, ocr);
/*
* Can we support the voltage of the card?
*/
- if (!host->ocr) {
+ if (!rocr) {
err = -EINVAL;
goto err;
}
@@ -1690,7 +1691,7 @@ int mmc_attach_mmc(struct mmc_host *host)
/*
* Detect and init the card.
*/
- err = mmc_init_card(host, host->ocr, NULL);
+ err = mmc_init_card(host, rocr, NULL);
if (err)
goto err;
@@ -721,6 +721,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
int err;
u32 max_current;
int retries = 10;
+ u32 pocr = ocr;
try_again:
if (!retries) {
@@ -774,7 +775,7 @@ try_again:
if (!mmc_host_is_spi(host) && rocr &&
((*rocr & 0x41000000) == 0x41000000)) {
err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
- host->ocr);
+ pocr);
if (err == -EAGAIN) {
retries--;
goto try_again;
@@ -936,6 +937,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
if (IS_ERR(card))
return PTR_ERR(card);
+ card->ocr = ocr;
card->type = MMC_TYPE_SD;
memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
}
@@ -1100,9 +1102,9 @@ static int mmc_sd_resume(struct mmc_host *host)
BUG_ON(!host->card);
mmc_claim_host(host);
- mmc_power_up(host, host->ocr);
- mmc_select_voltage(host, host->ocr);
- err = mmc_sd_init_card(host, host->ocr, host->card);
+ mmc_power_up(host, host->card->ocr);
+ mmc_select_voltage(host, host->card->ocr);
+ err = mmc_sd_init_card(host, host->card->ocr, host->card);
mmc_release_host(host);
return err;
@@ -1145,7 +1147,7 @@ static int mmc_sd_runtime_resume(struct mmc_host *host)
mmc_claim_host(host);
- mmc_power_up(host, host->ocr);
+ mmc_power_up(host, host->card->ocr);
err = mmc_sd_resume(host);
if (err)
pr_err("%s: error %d doing aggessive resume\n",
@@ -1161,7 +1163,7 @@ static int mmc_sd_power_restore(struct mmc_host *host)
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_claim_host(host);
- ret = mmc_sd_init_card(host, host->ocr, host->card);
+ ret = mmc_sd_init_card(host, host->card->ocr, host->card);
mmc_release_host(host);
return ret;
@@ -1206,7 +1208,7 @@ static void mmc_sd_attach_bus_ops(struct mmc_host *host)
int mmc_attach_sd(struct mmc_host *host)
{
int err;
- u32 ocr;
+ u32 ocr, rocr;
BUG_ON(!host);
WARN_ON(!host->claimed);
@@ -1249,12 +1251,12 @@ int mmc_attach_sd(struct mmc_host *host)
ocr &= ~MMC_VDD_165_195;
}
- host->ocr = mmc_select_voltage(host, ocr);
+ rocr = mmc_select_voltage(host, ocr);
/*
* Can we support the voltage(s) of the card(s)?
*/
- if (!host->ocr) {
+ if (!rocr) {
err = -EINVAL;
goto err;
}
@@ -1262,7 +1264,7 @@ int mmc_attach_sd(struct mmc_host *host)
/*
* Detect and init the card.
*/
- err = mmc_sd_init_card(host, host->ocr, NULL);
+ err = mmc_sd_init_card(host, rocr, NULL);
if (err)
goto err;
@@ -594,6 +594,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
int err;
int retries = 10;
u32 rocr = 0;
+ u32 ocr_card = ocr;
BUG_ON(!host);
WARN_ON(!host->claimed);
@@ -762,6 +763,7 @@ try_again:
card = oldcard;
}
+ card->ocr = ocr_card;
mmc_fixup_device(card, NULL);
if (card->type == MMC_TYPE_SD_COMBO) {
@@ -984,8 +986,8 @@ static int mmc_sdio_resume(struct mmc_host *host)
/* Restore power if needed */
if (!mmc_card_keep_power(host)) {
- mmc_power_up(host, host->ocr);
- mmc_select_voltage(host, host->ocr);
+ mmc_power_up(host, host->card->ocr);
+ mmc_select_voltage(host, host->card->ocr);
/*
* Tell runtime PM core we just powered up the card,
* since it still believes the card is powered off.
@@ -1003,7 +1005,7 @@ static int mmc_sdio_resume(struct mmc_host *host)
if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
sdio_reset(host);
mmc_go_idle(host);
- err = mmc_sdio_init_card(host, host->ocr, host->card,
+ err = mmc_sdio_init_card(host, host->card->ocr, host->card,
mmc_card_keep_power(host));
} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
/* We may have switched to 1-bit mode during suspend */
@@ -1043,7 +1045,7 @@ static int mmc_sdio_resume(struct mmc_host *host)
static int mmc_sdio_power_restore(struct mmc_host *host)
{
int ret;
- u32 ocr;
+ u32 ocr, rocr;
BUG_ON(!host);
BUG_ON(!host->card);
@@ -1080,13 +1082,13 @@ static int mmc_sdio_power_restore(struct mmc_host *host)
if (host->ocr_avail_sdio)
host->ocr_avail = host->ocr_avail_sdio;
- host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
- if (!host->ocr) {
+ rocr = mmc_select_voltage(host, ocr & ~0x7F);
+ if (!rocr) {
ret = -EINVAL;
goto out;
}
- ret = mmc_sdio_init_card(host, host->ocr, host->card,
+ ret = mmc_sdio_init_card(host, rocr, host->card,
mmc_card_keep_power(host));
if (!ret && host->sdio_irqs)
mmc_signal_sdio_irq(host);
@@ -1107,7 +1109,7 @@ static int mmc_sdio_runtime_suspend(struct mmc_host *host)
static int mmc_sdio_runtime_resume(struct mmc_host *host)
{
/* Restore power and re-initialize. */
- mmc_power_up(host, host->ocr);
+ mmc_power_up(host, host->card->ocr);
return mmc_sdio_power_restore(host);
}
@@ -1130,7 +1132,7 @@ static const struct mmc_bus_ops mmc_sdio_ops = {
int mmc_attach_sdio(struct mmc_host *host)
{
int err, i, funcs;
- u32 ocr;
+ u32 ocr, rocr;
struct mmc_card *card;
BUG_ON(!host);
@@ -1155,12 +1157,12 @@ int mmc_attach_sdio(struct mmc_host *host)
ocr &= ~0x7F;
}
- host->ocr = mmc_select_voltage(host, ocr);
+ rocr = mmc_select_voltage(host, ocr);
/*
* Can we support the voltage(s) of the card(s)?
*/
- if (!host->ocr) {
+ if (!rocr) {
err = -EINVAL;
goto err;
}
@@ -1168,7 +1170,7 @@ int mmc_attach_sdio(struct mmc_host *host)
/*
* Detect and init the card.
*/
- err = mmc_sdio_init_card(host, host->ocr, NULL, 0);
+ err = mmc_sdio_init_card(host, rocr, NULL, 0);
if (err)
goto err;
@@ -240,6 +240,7 @@ struct mmc_part {
struct mmc_card {
struct mmc_host *host; /* the host this device belongs to */
struct device dev; /* the device */
+ u32 ocr; /* the current OCR setting */
unsigned int rca; /* relative card address of device */
unsigned int type; /* card type */
#define MMC_TYPE_MMC 0 /* MMC card */
@@ -309,7 +309,6 @@ struct mmc_host {
spinlock_t lock; /* lock for claim and bus ops */
struct mmc_ios ios; /* current io bus settings */
- u32 ocr; /* the current OCR setting */
/* group bitfields together to minimize padding */
unsigned int use_spi_crc:1;
The negotiated ocr mask is directly related to the card. Once a card gets removed, the mask shall be dropped. By moving the cache of the ocr mask from the host struct to the card struct we have accomplished this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/mmc/core/core.c | 7 ++++--- drivers/mmc/core/mmc.c | 19 ++++++++++--------- drivers/mmc/core/sd.c | 22 ++++++++++++---------- drivers/mmc/core/sdio.c | 26 ++++++++++++++------------ include/linux/mmc/card.h | 1 + include/linux/mmc/host.h | 1 - 6 files changed, 41 insertions(+), 35 deletions(-)