diff mbox

[01/20] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes

Message ID 1379347346-823-2-git-send-email-lee.jones@linaro.org
State Accepted
Commit ffefbd7511addbb9811023ce25347dc3e6477d26
Headers show

Commit Message

Lee Jones Sept. 16, 2013, 4:02 p.m. UTC 
Turns out that they're actually not required and the driver probes just
fine without them. The ID is incorrect at the moment anyway. They actually
currently specify the stn8815.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi | 5 -----
 1 file changed, 5 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a152945..9c01d66 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -531,7 +531,6 @@ 
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -544,7 +543,6 @@ 
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -557,7 +555,6 @@ 
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -570,7 +567,6 @@ 
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -583,7 +579,6 @@ 
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;