@@ -767,21 +767,38 @@ dispc@0 {
};
};
- hdmi: encoder@40000 {
- compatible = "ti,dra7-hdmi";
- reg = <0x40000 0x200>,
- <0x40200 0x80>,
- <0x40300 0x80>,
- <0x60000 0x19000>;
- reg-names = "wp", "pll", "phy", "core";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- ti,hwmods = "dss_hdmi";
- clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
- <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
- clock-names = "fck", "sys_clk";
- dmas = <&sdma_xbar 76>;
- dma-names = "audio_tx";
+ target-module@40000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+ clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck", "dss_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40000 0x40000>;
+
+ hdmi: encoder@0 {
+ compatible = "ti,dra7-hdmi";
+ reg = <0 0x200>,
+ <0x200 0x80>,
+ <0x300 0x80>,
+ <0x20000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ dmas = <&sdma_xbar 76>;
+ dma-names = "audio_tx";
+ };
};
};
};
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module and drop "ti,hwmods" peroperty as this module is a child node of dispc and has no dependencies to to legacy platform data. Cc: Jyri Sarha <jsarha@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7.dtsi | 47 +++++++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 15 deletions(-)