@@ -378,18 +378,35 @@ rfbi: encoder@0 {
};
};
- dsi1: encoder@4000 {
- compatible = "ti,omap5-dsi";
- reg = <0x4000 0x200>,
- <0x4200 0x40>,
- <0x4300 0x40>;
- reg-names = "proto", "phy", "pll";
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- ti,hwmods = "dss_dsi1";
- clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
- <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
- clock-names = "fck", "sys_clk";
+ target-module@5000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5000 0x4>,
+ <0x5010 0x4>,
+ <0x5014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5000 0x1000>;
+
+ dsi1: encoder@0 {
+ compatible = "ti,omap5-dsi";
+ reg = <0 0x200>,
+ <0x200 0x40>,
+ <0x300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ };
};
dsi2: encoder@9000 {
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module and drop "ti,hwmods" peroperty as this module is a child node of dispc and has no dependencies to to legacy platform data. Cc: Jyri Sarha <jsarha@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap5.dtsi | 41 +++++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 12 deletions(-)